Scolmore House, Mariner, Licheld Road Ind. Estate, Tamworth, Staffordshire, B79 7UL
Telephone: 01827 63454
E-mail: [email protected]
Facsimile: 01827 63362
Website: www.scolmore.com
Technical, Safety &
Installation Information
Product Ref: CT300
250V~ 20A 4 Pin (1 in 3 Out) Connector
Please read the following information carefully before commencing installation.
Before commencing any electrical work, ensure the mains isolator on the consumer
unit / fuse board is in the ‘OFF’ position, to prevent the possibility of electric shock.
This product should be installed by a qualied electrician, and wired in accordance
with the IEE Wiring Regulations.
This product is designed for use in xed wiring installations only.
This product is only suitable for installation in NON-READILY accessible areas.
Installation couplers are intended for connection and disconnection without load only.
• Durable Thermoplastic.
• Tested and compliant with BS5733, BS8488 and IEC61535.
• Tested and compliant with BS7671:2008, Table 4A2 reference method E.
• One input to three outputs.
• Will accept 3 pin or 4 pin FLOW connectors.
• Easy lock and release mechanism.
• Can be used in conjunction all other Click Flow hub junction boxes.
WARNING
Any dangerous compatibility between different manufacturer installation coupler
systems is not automatically prevented by compliance with IEC 61535.
This system is NOT a replacement for a domestic plug and socket outlet-system.
Do not remove cover.
For cleaning / polishing of products, use only a soft, dry, clean cloth.
IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN.
Retain these instructions for future reference.
LIVE
EARTH
NEUTRAL
AUX
SUPPLY
LIVE
EARTH
NEUTRAL
AUX
SUPPLY:
V. 3
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Diono Monterey 4 DXT User manual
-
John Lewis JLUCLFW6013 User manual
-
-
-
-
Bluefin LED P24 Installation guide
-
-
-
John Lewis JLBIGH753 User manual
-
