Sealey SA630.V3 User manual

Brand: Sealey

Model: SA630.V3

Category: Power tools

Type: User manual

Sealey SA630.V3 is a powerful and versatile air ratchet wrench designed for professional use. With its compact size and lightweight design, it's ideal for working in confined spaces, such as around engines. The wrench features a 1/4" and 3/8" square drive, providing compatibility with a wide range of sockets. It delivers a maximum torque of 34Nm, making it suitable for a variety of tasks, from removing lug nuts to tightening bolts. The composite cover reduces the effects of chill on the operator's hands, and the 360° adjustable exhaust outlet keeps airflow away from the user.

1/4”,3/8”SQ DRIVE MINI AIR RATCHET WRENCHES

MODEL NO’S: SA630.V3, SA631.V3

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

9Follow all workshop safety rules, regulations, and conditions when using wrench.

 WARNING!Disconnect from air supply before changing accessories or servicing.

9 Maintain the Ratchet Wrench and battery in good condition. Check moving parts alignment on a regular basis.

9 Replace or repair damaged parts. Use an authorised service agent and recommended parts only. Unauthorised parts may be

dangerous and will invalidate the warranty.

9 Keep the Ratchet Wrench and charger clean for best and safest performance.

9 Removeillttingclothing.Removeties,watches,ringsandotherloosejewelleryandcontainlonghair.

9 EvaluateyourworkingareabeforeusingtheRatchetWrench;e.g.ceilings,oorsandenclosuresmaycontainelectricalitemsorwater

piping

9 Secure loose work pieces with a clamp, vice or other adequate holding device.

9 Avoid unintentional starting.

9 Wear approved safety eye/face shield, ear defenders, and hand protection.

9 Maintaincorrectbalanceandfooting.Ensuretheoorisnotslipperyandwearnon-skidshoes.

9 Keep children and unauthorised persons away from the working area.

8 DO NOTusetheRatchetWrenchwherethereareammableliquids,solidsorgases,suchaspaintsolvents,etc.

8 DO NOT allow children to operate the Ratchet Wrench.

8 DO NOToperatetheRatchetWrenchifanypartsaremissingasthismaycausefailureand/orpersonalinjury.

8DO NOT use wrench unless you have been instructed in its use by a qualified person.

8 DO NOT carry the wrench by the air hose, or yank the hose from the air supply.

8 DO NOT hold unsecured work piece in your hand.

8 DO NOT leave the Ratchet Wrench operating unattended.

8 DO NOTcarrytheRatchetWrenchwithyourngeronthetrigger.Keepchuckdirectionswitchinthelockedposition.

8 DO NOT use the Ratchet Wrench for a task it is not designed to perform.

8 DO NOToperatetheRatchetWrenchwhenyouaretiredorundertheinuenceofalcohol,drugsorintoxicatingmedication.

8 DO NOT direct air from the air hose at yourself or others.

9 When not in use disconnect from air supply and store in a safe, dry, childproof location.

2. INTRODUCTION

Composite cover moulded around lightweight aluminium alloy housing reduces effects of chill on operator’s hands and provides added control.

Airmotorwithqualitybearingsforsmoothandpowerfuloperation.Exhaustoutletadjusts360°,keepingairowawayfromoperator.Minidesign

isidealforworkingaroundengineswherespaceislimited.Featurestwist-reverseactionandtriggeroperatedpowercontrol.Hardenedgearand

yoke assembly ensures suitability for the professional workshop.

3. SPECIFICATION

Model No: .............................................. SA630.V3/SA631.V3

Air Consumption:............................................................ 3cfm

Drive: .................................................................. 1/4”/3/8”Sq.

Free Speed: ...............................................................250rpm

Inlet Size: ..................................................................1/4”BSP

Length: ....................................................................... 197mm

MaximumTorque: ............................................. 25lb.ft(34Nm)

NoisePower/Pressure: ........................................ 86/83dB(A)

OperatingPressure: ...................................................... 90psi

Vibration/Uncertainty: ................................... 0.448/0.224m/s²

4. PREPARATION

4.1. AIR SUPPLY

 WARNING! Ensuretheairsupplyiscleananddoesnotexceed90psiwhileoperatingthewrench.Toohighanairpressureandunclean

 airwillshortentheproductlifeduetoexcessivewear,andmaybedangerouscausingdamageand/orpersonalinjury.

4.1.1. Ensurewrenchairvalve(ortrigger)isinthe“off”positionbeforeconnectingtotheairsupply.

Refer to

instruction

manual

Wear eye

protection

Wear ear

protection

Wear protective

gloves

SA630.V3,SA631.V3Issue:3(H,F)05/12/22

Original Language Version

fig.1

fig.2

4.1.2. Youwillrequireanairpressureof90psi,andanairflowaccordingtospecification.

4.1.3. Drain the air tank daily. Water in the air line will damage the wrench.

4.1.4. Cleanairinletfilterweekly.Recommendedhook-upprocedureisshowninfig1.

4.1.5. Linepressureshouldbeincreasedtocompensateforunusuallylongairhoses(over8metres).Theminimumhosediametershouldbe

 1/4”internaldiameterandfittingsmusthavecompatibledimensions.

4.1.6. Keep hose away from heat, oil and sharp edges. Check hose for wear, and make certain that all connections are secure.

4.2. COUPLINGS

4.3.  Vibrationmaycausefailureifaquickchangecouplingisconnecteddirectlytothewrench.Toovercomethis,connectaleaderhoseto

 thewrench(Sealeyref:AH2RorAH2R/38).Aquickchangecouplingmaythenbeusedtoconnecttheleaderhosetotheairlinerecoil

 hose.Seeg1&2.

5. OPERATION

 WARNING!Ensureyouread,understandandapplySection1safetyinstructions.

5.1.  Onlyuseimpactsocketswhicharespecicallydesignedforusewitharatchetwrench.

5.2.  ConnectthewrenchtotheairsupplyasdescribedinSection3.

5.3.  Placethesocketoverthesubjectnutanddepressthetriggertooperatethewrench.

5.4.  Tochangewrenchdirectionturntheswitchontheheadofthewrench.

8 DO NOT use any additional force upon the wrench in order to remove a nut.

8 DO NOTallowwrenchtofreerunforanextendedperiodoftimeasthiswillshorten its life.

6. MAINTENANCE

 WARNING!Disconnect wrench from air supply before changing accessories, servicing or performing maintenance.Replace or repair

damaged parts. Use genuine parts only. Non-authorised parts may be dangerous and will invalidate the warranty.

6.1. Lubricate the air wrench daily with a few drops of Sealey air tool oil dripped into the air inlet to prolong its life.

6.2. Clean the wrench after use. DO NOT use worn, or damaged sockets.

6.3. Loss of power or erratic action may be due to the following:

a) Excessivedrainontheairline.Moistureorrestrictionintheairpipe.Incorrectsizeortypeofhoseconnectors.Toremedycheckthe

  airsupplyandfollowinstructionsinSection4.

b)Gritorgumdepositsinthewrenchmayalsoreduceperformance.Ifyourmodelhasanairstrainer(locatedintheareaoftheairinlet),

  removethestrainerandcleanit.FlushthewrenchoutwithgumsolventoiloranequalmixtureofSAENo10oilandparaffin.

Allow to dry before use.

6.4. For a full service contact your local Sealey service agent.

6.5. When not in use, disconnect from air supply, clean wrench and store in a safe, dry, childproof location.

WARNING! – Risk of Hand Arm Vibration Injury.

This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately.

 ThistoolissubjecttothevibrationtestingsectionoftheMachineryDirective2006/42/EC.

 Thistoolistobeoperatedinaccordancewiththeseinstructions.

Measured vibration emission value (a): 0.448m/s²

Uncertainty value (k): 0.224 m/s²

Please note that the application of the tool to a sole specialist task may produce a different average vibration emission.

We recommend that a specific evaluation of the vibration emission is conducted prior to commencing with a specialist task.

 Ahealthandsafetyassessmentbytheuser(oremployer)willneedtobecarriedouttodeterminethesuitabledurationofuseforeach

tool. NB: StatedVibrationEmissionvaluesaretype-testvaluesandareintendedtobetypical.

Whilst in use, the actual value will vary considerably from and depend on many factors.

Such factors include; the operator, the task and the inserted tool or consumable.

NB: ensure that the length of leader hoses is sufficient to allow unrestricted use, as this also helps to reduce vibration.

The state of maintenance of the tool itself is also an important factor, a poorly maintained tool will also increase the risk of Hand Arm

Vibration Syndrome.

Health surveillance.

 Werecommendaprogrammeofhealthsurveillancetodetectearlysymptomsofvibrationinjurysothatmanagementprocedurescanbe

modified accordingly.

Personal protective equipment.

 Wearenotawareofanypersonalprotectiveequipment(PPE)thatprovidesprotectionagainstvibrationinjurythatmayresultfromthe

 uncontrolleduseofthistool.Werecommendasufficientsupplyofclothing(includinggloves)toenabletheoperatortoremainwarmand

 dryandmaintaingoodbloodcirculationinfingersetc.Pleasenotethatthemosteffectiveprotectionisprevention,pleaserefertothe

 CorrectUseandMaintenancesectionintheseinstructions.Guidancerelatingtothemanagementofhandarmvibrationcanbefoundon

 theHSCwebsitewww.hse.gov.uk-Hand-ArmVibrationatWork.

Original Language Version

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to

a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely

unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids

according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts

without prior notice.

Important: No Liability is accepted for incorrect use of this product.

Warranty:Guaranteeis24monthsfrompurchasedate,proofofwhichisrequiredforanyclaim. REGISTER YOUR

PURCHASE HERE

Sealey SA630.V3 User manual

Brand: Sealey

Model: SA630.V3

Category: Power tools

Type: User manual

Download PDF

report

Sealey SA630.V3 User manual

Sealey SA630.V3 User manual

Related papers

Other documents