Carro P-M4006011A1 User manual

Brand: Carro

Model: P-M4006011A1

Type: User manual

INSTALLATION INSTRUCTION

1. Electrical appliances must only be connected by competent persons.

2. Before commencing installation work disconnect the mains cable

from the power supply-removing the fuse or turning switch to "OFF"!

3. Do not attach lamps to surface which are damp,freshly painted,

otherwise eletrically conductive.

4. Use the subjection system according to the weight of the lamp.

5. Be sure to always use the correct type of bulb. (See information

on the label)

6. Cleaning is limited to the outer surfaces, shades or protective

glass, reflectors and covers.

7. Do not touch the bulb with bare hands. Always switch off the

electricity supply and allow to cool for 10 minutes before changing

the light bulbs.

8.If the light is with crystal or glass,please follow below steps.

a. Check the packed bags with numbers then open them.

b. Hang the crystals to the right places according to

theillustration.

NOTES:

1. The symbol " "indicates that the lamp has an earth terminal.

(The earth wire yellow and green )must be connected to the terminal

indicated by the symbol.

2. " "Protection class II=This lamp is doubly insulated and must

not be connected to and earth wire.

3. The symbol" "indicates that the lamp head must be at

least '0.5m' from the lighted surface.

4. The symbol" "indicates that luminaire is suitable for use on

normally flammable surface.

5. The symbol" "indicates that luminaire is only suitable for use

indoors.

6. The below is how fitting wire connect to household circuit.

Fitting wire colour Household circuit

Green/Yellow connect to Yellow/Green

Blue or white connect to Blue or White

Brown or black connect to Brown or Red

Earth

Neutral

Live

P-M4006011A1

L N

Blue wire

Terminal block

Brown wire

Green yellow wire

Carro P-M4006011A1 User manual

Carro P-M4006011A1 User manual

Carro P-M4006011A1 User manual

Other documents