Page | 2
You definitely want your dumping tools to be somewhere
as removed as possible from the living space, and there
are so many creative ways to do this from DIY to
specifically designed aftermarket storage options by
trusted retailers.
• Built-in RV storage compartment
• DIY compartment door storage for sewer hose
• Storage bin
• RV bumper
• DIY or aftermarket sewer hose storage
• Sewer hose storage bag
• Sewer hose end caps
WE’RE IN THE LINE OF DOODY.
Cleaning the Dumping Accessories
First be sure to dump your tanks in the most
efficient order:
1. Dump the black tank first.
2. Rinse/flush the black tank.
3. Dump the gray tank.
4. Rinse the hose with fresh water while still
hooked up to the cleanout.
After rinsing the hose, disconnect it from the
cleanout. Fill the hose with water and disinfectant
and let sit overnight. Some in the RVing
community recommend the following process for
disinfecting an RV waste hose:
1. Fill the discharge hose with bleach water
and cap both ends.
2. Shake the hose up a bit so the bleach
water reaches all the accordion groves
inside the hose.
3. Let it sit overnight to disinfect, and dump
and rinse the next morning.
4. Spray an antibacterial cleaner on the ends
of the discharge hose before storing
(optional).
Bleach is an effective disinfectant, but you need
to be careful about which pieces come in contact
with it. The rubber seals in the valve connector
can be damaged by soaking it in bleach water and
obviously anything metallic can rust when left
sitting in water for long periods of time, so it’s
better to only use this technique with accessories
and fittings that have non-metallic material. If
some of your accessories have grime or actual
solids stuck on them, you might consider soaking
them in a bucket of water and a couple ounces of
Unique RV Digest-It so it will be broken up. Then
you can soak them in bleach or antibacterial soap
to kill all the unseen bacteria still on them.