2. Home
  3. Domestic appliances
  4. Large home appliances
  5. Dishwashers
  6. Inalto
  7. DW42CS

Inalto DW42CS User guide

  • Hello! I've reviewed the user guide for the InAlto DW42CS dishwasher. This guide outlines the features, control panel, and start-up instructions for the appliance, including its programs, delay start and safety features. I'm ready to answer any questions you have about its operation and functions.
  • What is the capacity of this dishwasher?
    How many wash programs does it offer?
    Does the dishwasher have a delay start function?
MODEL/DW42CS INALTO.HOUSE
QUICK START GUIDE
45cm
Freestanding
Dishwasher
FEATURES
10 Place Settings, 7 Wash Programs,
LED Display with Button Controls, Delay Start Function,
Extra Dry Function, Child Lock,
Slide-out Cutlery Tray
MODEL/DW42CS INALTO.HOUSE
QUICK START GUIDE
SUPPORT
Telephone: 1300 11 4357
Email: [email protected]
DETAILS
Dimensions (W, D, H mm): 448 × 600 × 845
Warranty: 3 Years (2 + 1 on registration)
Congratulations on your new
InAlto 45cm Freestanding Dishwasher!
1 2 3
4
5
15
6 7
8
9
10 11
12
13 14
THE CONTROL PANEL
1. On/O button
2. Wash Zone button
3. Delay button
4. Child lock function
5. Rinse Aid indicator
6. Program Ended indicator
7. Water tap indicator
8. LED Display
9. Program indicators
10. Child lock indicator
11. Extra Drying indicator
12. Lower Basket Rack Zone indicator
Upper Basket Rack Zone indicator
13. Program button
14. Extra Drying button
15. Start/Pause button
1. Load your dishwasher and add
detergent to the detergent dispenser
2. Close the dishwasher door and press the
Power button, on the control panel, to
turn on your dishwasher.
3. Press the Program button to cycle
through the various dishwasher
programs, to select your desired wash
program. The LED will alight alongside
the corresponding program selected.
4. Add any additional options to the wash
program, including Half Load or Extra
Drying.
5. Add any Delay start, if you would like to
postpone the wash cycles start by 3, 6 or
9 hours. Simply press the Delay button
to cycle through the options.
6. Press the Start/Pause button to start
the wash program, using the settings
you’ve selected.
STARTING A WASHING CYCLE
Note: For more information refer to Page 20 of your User Manual.
/