2. Braun
  3. ThermoScan PRO 6000

Braun ThermoScan PRO 6000 User manual

  • Hello! I'm a chat assistant that has analyzed the provided document for the Braun ThermoScan PRO 6000 thermometer. This document is a cleaning guide that outlines how to clean the thermometer's body, contacts, and probe using approved solutions. It also includes important notes about drying times. I'm ready to answer any questions you may have about the cleaning process or other aspects of using this thermometer, based on the information in the guide.
  • What are the approved cleaning solutions for the thermometer body?
    What is the approved cleaning solution for the thermometer contacts?
    What is the only approved cleaning solution for the lens window and probe?
Cleaning guide
80028341 Ver. A
Revision Date: 2021-04
©2021 Welch Allyn, Inc.
All rights reserved.
This product is manufactured by Welch Allyn, Inc. under licence to the
'Braun' trademark. 'Braun' is a registered trademark of Braun GmbH,
Kronberg, Germany. Thermoscan is a registered trademark owned by
Helen of Troy Limited.
Hillrom Technical Support
hillrom.com/en-us/about-us/locations/
Welch Allyn, Inc. is a subsidiary of Hill-Rom Holdings, Inc.
Wipe dry. Allow 5 minutes drying time.
Make sure probe lens window is dry before use.
Approved cleaning solutions
• 70% isopropyl alcohol or ethyl
alcohol only!
Wipe gently!
21 3
Lens window and probe
Mem
C / F
1
Place the thermometer aside for 1 minute,
allowing the contacts to air dry.
Approved cleaning solutions
• 70% isopropyl alcohol or ethyl
alcohol
21
Thermometer contacts
21 3
Wipe dry. Allow 5 minutes drying time.
Make sure thermometer body is dry before use.
Mem
C / F
NOTE
Place a new probe cover on the
thermometer before cleaning.
Approved cleaning solutions
• 70% isopropyl alcohol or ethyl alcohol
• Hydrogen peroxide (Virox, Oxivir)
• Quaternary ammonium compounds
(CaviWipes
™
, Clinell Universal Wipes
®
,
Sanicloth)
• 10% Chlorine bleach solution
Mem
C / F
Thermometer body
/