8
NUC12WSH
User Guide – August 2022
3.0 Install and Remove System Memory
Intel® NUC 12 Pro Kit NUC12WSH has two 260-pin DDR4 SO-DIMM memory slots
Memory requirements:
• 1.2V low voltage memory
• 2133/2400/3200 MHz SO-DIMMs
• Non-ECC
Find compatible system memory modules at the Intel® Product Compatibility Tool:
• Intel® NUC 12 Pro Kit NUC12WSHi3
• Intel® NUC 12 Pro Kit NUC12WSHi30L
• Intel® NUC 12 Pro Kit NUC12WSHi30Z
• Intel® NUC 12 Pro Kit NUC12WSHi5
• Intel® NUC 12 Pro Kit NUC12WSHi50Z
• Intel® NUC 12 Pro Kit NUC12WSHv5
• Intel® NUC 12 Pro Kit NUC12WSHv50L
• Intel® NUC 12 Pro Kit NUC12WSHv50Z
• Intel® NUC 12 Pro Kit NUC12WSHi7
• Intel® NUC 12 Pro Kit NUC12WSHi70Z
• Intel® NUC 12 Pro Kit NUC12WSHv7
• Intel® NUC 12 Pro Kit NUC12WSHv70L
• Intel® NUC 12 Pro Kit NUC12WSHv70Z
3.1 Install SO-DIMMs
If you plan to install just one SO-DIMM, install it in the lower memory socket.
To install the SO-DIMMs, follow these steps:
1. Observe the precautions in "Before You Begin" in Section 1.1.
2. Turn off all peripheral devices connected to the computer. Turn off the
computer and disconnect the AC power cord.