The LG NB5630A soundbar delivers an immersive audio experience with its 3D Sound feature and Dynamic Range Control (DRC). It boasts a sleek design and can be easily mounted on a wall. LG Sound Sync technology allows you to control the soundbar's volume with your LG TV remote. Enjoy music from your Bluetooth devices with ease and adjust the sound level of the woofer speaker to your preference.
The LG NB5630A soundbar delivers an immersive audio experience with its 3D Sound feature and Dynamic Range Control (DRC). It boasts a sleek design and can be easily mounted on a wall. LG Sound Sync technology allows you to control the soundbar's volume with your LG TV remote. Enjoy music from your Bluetooth devices with ease and adjust the sound level of the woofer speaker to your preference.
OWNER’S MANUAL
Sound bar
Please read this manual carefully before operating your set and retain it
for future reference.
NB5630A (NB5630A, S73A1-D)
ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
SLOVENŠČINA
ITALIANO ESPAÑOL
ΕΛΛΗΝΙΚΑ
PORTUGUÊS
NB5630A-NS.DDEULLK_ENG.indd 1 2013-10-23 9:14:39
1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of sucient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
centre. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
NB5630A-NS.DDEULLK_ENG.indd 2 2013-10-23 9:14:39
Getting Started 3
Getting Started
1
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by
the European Directive 2002/96/EC.
2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.
3. The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.
4. For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product
it means they are covered by
European Directive 2006/66/EC.
2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury,0.002% of cadmium or
0.004% of lead.
3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or
the local authorities.
4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.
5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.
NB5630A-NS.DDEULLK_ENG.indd 3 2013-10-23 9:14:40
Getting Started4
Getting Started
1
LG Electronics hereby declares that this/these
product(s) is/are in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC, 2004/108/EC, 2006/95/EC,
2009/125/EC and 2011/65/EU.
Please contact to the followingaddress for
obtaining a copy of the DoC (Declaration of
Conformity).
Contact oce for compliance of this product:
LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands
y
Please note that this is NOT a Customer
Service contact point. For Customer Service
Information, see Warranty Card or contact the
dealer that you purchased this product.
In door use only.
RF Radiation Exposure Statement
This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body.
NB5630A-NS.DDEULLK_ENG.indd 4 2013-10-23 9:14:40
Table of Contents 5
1
2
3
4
5
Table of Contents
1 Getting Started
2 Safety Information
6 Unique features
6 Introduction
6 – Symbols used in this manual
6 Accessories
7 Remote control
9 Front panel
10 Rear panel
11 Mounting the main unit on a wall
2 Connecting
13 Connection and setting up
13 – Connecting the AC adapter
13 – OPTICAL In connection
14 – Pairing wireless subwoofer
3 Operating
15 Basic operations
15 LG Sound Sync
16 – AUTO POWER On/Off
16 Using Bluetooth technology
17 – Listening to music stored on the
Bluetooth devices
18 Other operations
18 – Turn off the sound temporarily
18 – Adjust the woofer level settings
18 – 3D Sound effect
18 – DRC (Dynamic range control)
18 – Auto power down
4 Troubleshooting
19 Troubleshooting
5 Appendix
20 Specifications
21 Trademarks and licenses
21 Maintenance
21 – Handling the unit
NB5630A-NS.DDEULLK_ENG.indd 5 2013-10-23 9:14:40
Getting Started6
Getting Started
1
Unique features
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Bluetooth
Enjoys music from bluetooth device with simple
connection.
Introduction
Symbols used in this manual
,
Note
Indicates special notes and operating features.
>
Caution
Indicates cautions for preventing possible damages
from abuse.
Accessories
Please check and identify the supplied accessories.
Remote control (1) Battery (1)
AC adapter (1) Power cord (1)
Wall bracket (1) Wall bracket (2)
WALL BRACKET
INSTALL GUIDE (3)
Optical cable (1)
Screw (8) & Wall Plug (8)
NB5630A-NS.DDEULLK_ENG.indd 6 2013-10-23 9:14:42
Getting Started 7
Getting Started
1
Remote control
y
Once the sound bar is shut down to
standby, please wait several seconds before
trying to use remote again.
y
When you press any button on the remote
control, the red LED on the main unit blinks
twice. (Except
1
(Power) button)
y
The color LED that indicates the current
function is lit up for about 3 seconds
when you press the function buttons :
,
OPTICAL.
y
If the volume level reached a minimum or
a maximum, the red LED on the unit is lit
up when you adjust the volume level of the
sound bar.
y
If the woofer level reached a minimum or
a maximum, the red LED on the unit is lit
up when you adjust the woofer level of the
wireless subwoofer.
,
Note
• • • • • • • • • •
a
• • • • • • • • •
1
(Power) : Switches the unit ON or OFF.
VOL +/- : Adjusts speaker volume.
?
: The button is not available for any function.
(Mute) : Mutes the sound.
: Select Bluetooth function.
OPTICAL: Select Optical function.
?
: The button is not available for any function.
• • • • • • • • • •
b
• • • • • • • • •
WOOFER LEVEL +/- : Sets the sound level of
woofer speaker.
3D SOUND : Turns on and o the 3D Sound mode.
DRC : Sets DRC(Dynamic range control) function.
• • • • • • • • • •
c
• • • • • • • • •
AUTO POWER : This function is automatically
turned on the unit.
TV Control buttons: Controls the TV. (LG TV only)
You can control the functions on LG TV : Power,
input source, sound level, channels.
NB5630A-NS.DDEULLK_ENG.indd 7 2013-10-23 9:14:43
Getting Started8
Getting Started
1
Battery Installation
1. Turn the battery cover counterclockwise by
using a coin. Then take the battery cover.
Coin
2. Insert and fix the battery with the minus (-)
facing in the same direction as the minus (-) on
the battery compartment.
3. Put the battery cover on the remote control and
turn it clockwise to close.
Coin
If you have long nails, do not open the battery
cover by using your nger. Or else, your nail
would be broken.
>
Caution
Warning
DO NOT INGEST BATTERY. CHEMICAL BURN
HAZARD.
y
The battery used in this device may present
a re or chemical burn hazard if mistreated.
Do not recharge, disassemble, incinerate,
or heat above 100 °C (212 °F). Replace
the battery part no. CR2025 only. Use of
another battery may present a risk of re
or explosion. Dispose of used battery.
Keep battery away from children. Do not
disassemble or dispose of in re.
y
[The remote control supplied with] This
product contains a coin/button cell battery.
If the coin/button cell battery is swallowed,
it can cause severe internal burns in just
2 hours and can lead to death. Keep new
and used batteries away from children. If
the battery compartment does not close
securely, stop using the product and keep
it away from children. If you think batteries
might have been swallowed or placed
inside any part of the body, seek immediate
medical attention.
>
Caution
NB5630A-NS.DDEULLK_ENG.indd 8 2013-10-23 9:14:43
Getting Started 9
Getting Started
1
A
Remote sensor
B
LED indicator
You can check the current state of the sound bar by the color LED on it. Refer to the table below.
LED Color
LED State
Red Orange Green
O Power on or disconnected power cord
On Stand by - -
Blink
(Twice per second)
Booting Bluetooth ready -
Blink
(Once per second)
Mute - -
On -> O
(After 3 seconds)
- Bluetooth paired
Optical function
selected
Front panel
A
B
NB5630A-NS.DDEULLK_ENG.indd 9 2013-10-23 9:14:44
Getting Started10
Getting Started
1
Rear panel
A
F (Function)
Press it repeatedly to select other function.
B
+ / - (Volume)
Adjusts speaker volume.
C
1/!
(Standby/On).
D
Shaft
E
Optical input
F
DC input
Precautions in using the touch buttons
y
Use the touch buttons with clean and dry
hands.
- In a humid environment, wipe out any
moisture on the touch buttons before
using.
y
Do not press the touch buttons hard to
make it work.
- If you apply too much strength, it can
damage the sensor of the touch buttons.
y
Touch the button that you want to work in
order to operate the function correctly.
y
Be careful not to have any conductive
material such as metallic object on the
touch buttons. It can cause malfunctions.
>
Caution
E
F
D
A B C
NB5630A-NS.DDEULLK_ENG.indd 10 2013-10-23 9:14:44
Getting Started 11
Getting Started
1
Mounting the main
unit on a wall
Mounting the main unit on a wall, you should
connect all the cables for operating the unit. For
details, refer to the page 13.
You can mount the main unit on a wall.
Prepare screws and brackets.
Main unit
Wall bracket (3)
WALL BRACKET
INSTALL GUIDE (3)
y
The set may be damaged if the set falls
down on its side.
y
Please do not lift the set by holding only
center part alone.
y
Please two people should lift the set by
sides when moving it.
>
Caution
1. Fitted with Bracket Center Guide according to
Screen Center and Bottom Line.
SCREEN
2. When you mount it on a wall (concrete), use
the wall plugs. You should drill some holes. A
guide sheet (WALL BRACKET INSTALL GUIDE)
is supplied to drill. Use the sheet to check the
point to drill.
Make sure that the triangle mark on the wall
bracket should be facing upwards.
,
Note
3. Remove the Wall bracket install guide.
4. Fix it with screws (not supplied) as shown in the
illustration below.
SCREEN
Screw (8) &
Wall Plug (8)
NB5630A-NS.DDEULLK_ENG.indd 11 2013-10-23 9:14:45
Getting Started12
Getting Started
1
The order of installation wall mount bracket
center screw
A B C D
1. After inserting the
C
screw adjust the left
and right center.
2. After ensuring the flatness insert
B
screw.
3.
A
,
D
screw fixation after inserting
B
,
C
screw.
,
Note
5. Prefixed with bracket left / right guide according
to screen side and bottom line.
6. Remove the wall bracket install guide.
7. Fix it with screws as shown in the illustration
below.
The order of installation wall mount bracket
side screw
1.
Tightening the
B
screw.
2. Then, aligning the flatness tighten the
A
screw.
3. Confirmed the position of the screws after
A
,
B
screw loose while checking flatness.
,
Note
A B
Screen and wall-bracket position
5%4''0
8. Hang the main unit onto the bracket as shown
below.
NB5630A-NS.DDEULLK_ENG.indd 12 2013-10-23 9:14:47
2 Connecting
13
2
Connecting
Connecting
y
Do not install this unit upside down. It can
damage the parts of this unit or be the
cause of personal injury.
y
Do not hang onto the installed unit and
avoid any impact to the unit.
y
Secure the unit rmly to the wall so that it
does not fall o. If the unit falls o, it may
result in an injury or damage to the product.
y
When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
>
Caution
Detach the unit from the bracket as shown
below.
,
Note
Connection and setting
up
Connecting the AC adapter
Prior to installing the wall mount, rst connect the
cable.
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC. IN adapter
input.
3. Plug the AC power cord into an AC outlet.
Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
>
Caution
OPTICAL In connection
Connect the OPT. IN jack on the back of the unit to
OPTICAL OUT jack on the Cinema beam TV using
an OPTICAL cable.
NB5630A-NS.DDEULLK_ENG.indd 13 2013-10-23 9:14:48
14
2
Connecting
Connecting
Information of the color LED indicators
State Sound bar LED Wireless subwoofer LED
Standby Red Red
Initial pairing Red (Blink) Yellow-green (Blink)
Pairing Green (Blink) Yellow-green (Blink)
Connected Green [ O Yellow-green
Disconnected O Yellow-green (Blink) [ Red
y
If you operate main unit then wireless
subwoofer sound within a few seconds in
standby mode.
y
Set the distance between this unit and
wireless subwoofer within 10 m.
y
Optimum performance can be
implemented only when the unit and the
Wireless subwoofer within distance of 2 m
to 10 m is used since communication failure
may occur if longer distance is used.
y
It takes a few seconds (and may take longer)
for the unit and subwoofer to communicate
with each other.
,
Note
Pairing wireless subwoofer
Setting up the wireless subwoofer
for the first time
1. Connect the power cord of the wireless
subwoofer to the outlet. The Yellow-green LED
on the subwoofer starts to blink.
2. Turn on the main unit. The red LED on it starts to
blink and then the main unit and the subwoofer
will be automatically connected.
When connection is completed, the Yellow-
green LED on the subwoofer is turned on and
the green LED on the main unit is lit up for
about 3 seconds.
Manually pairing wireless subwoofer
When the connection has been failed between the
main unit and the wireless subwoofer, the red LED
on the subwoofer is turned on. To pair them, follow
the steps below.
1. Press PAIRING on the back of the subwoofer.
The Yellow-green LED on the wireless
subwoofer starts to blink.
2. Press and hold
(Volume) on the unit and
(Mute) on the remote control at the same time.
The green LED on the main unit starts to blink.
3. After the Yellow-green LED on the subwoofer
is turned on, press the buttons on step 2 again.
The connection will be completed.
NB5630A-NS.DDEULLK_ENG.indd 14 2013-10-23 9:14:48
3 Operating
3
Operating
Operating 15
Basic operations
LG Sound Sync
You can control some functions of this unit by
your TV's remote control with LG Sound Sync. It
is compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo
on your TV.
Controllable function by LG TV's remote control :
Volume up/down, mute.
Refer to the TV's instruction manual for the details
of LG Sound Sync.
Make one of the following connections, depending
on the capabilities of your equipment.
y
You can also use the remote control of
this unit while using LG Sound Sync. If you
use TV's remote control again, the unit
synchronizes with the TV.
y
When the connections failed, make sure of
the condition of the TV and power of it.
y
Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
-
Turned o the unit.
-
Changing the function to the others.
-
Disconnecting the optical digital audio
cable.
y
The amount of time to turn o this unit is
dierent depending on your TV when you
set AUTO POWER function to ON.
,
Note
With wired connection
1. Connect your LG TV to the unit by using an
optical digital cable. (Refer to the page 13.)
2. Set up LG Sound Sync (Optical) on the TV. Refer
to the TV's instruction manual.
3. Turn on the unit by pressing
1
(Power) on the
remote control.
4. Select OPTICAL function by using OPTICAL on
the remote control.
Green LED on the unit is lit up for about 3
seconds and you can listen to the TV's sound.
NB5630A-NS.DDEULLK_ENG.indd 15 2013-10-23 9:14:48
16
3
Operating
Operating
AUTO POWER On/Off
This function automatically turns on/o the unit
when you turn on/o the TV or the external device
(DVD Player, Blu-ray Disc Player, etc.) connected to
this unit.
It is supported only on OPTICAL functions.
Turn on or o AUTO POWER function by using
AUTO POWER ON/OFF on the remote control.
y
After the unit is turned on by AUTO POWER
function, it will be automatically turned o if
there is no signal for a certain period of time
from the TV connected by LG Sound Sync
(Optical).
y
After the unit is turned on by AUTO POWER
function, it will be automatically turned o if
there is no signal for a certain period of time
from the external device connected by an
optical cable.
y
Depending on the connected device, this
function may not operate.
y
It is not available to turn on the unit by
AUTO POWER function if you turn o the
unit directly.
y
On bluetooth function, this unit may
be turned on by AUTO POWER function
depending on the connected bluetooth
device. But in this case, this unit will be
turned o automatically.
,
Note
Using Bluetooth
technology
About Bluetooth
Bluetooth is wireless communication technology
for short range connection.
The sound may be interrupted when there is
interference by the other electronic waves which
run on same frequency or if you connect bluetooth
devices in the other rooms nearby.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges. A
mobile phone with Bluetooth® wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA etc.
Bluetooth profiles
In order to use Bluetooth® wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
NB5630A-NS.DDEULLK_ENG.indd 16 2013-10-23 9:14:49
3
Operating
Operating 17
Listening to music stored on
the Bluetooth devices
Pairing this unit and Bluetooth
device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using
on
the remote control. Then the orange LED on the
unit starts to blink.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG SOUND BAR
(XX:XX)”.
XX:XX means the last four digits of BT
address. For example, if your unit has a BT
address such as 9C:02:98:4A:F7:08, you
will see “LG SOUND BAR (F7:08)” on your
Bluetooth device.
,
Note
3. Enter the PIN code.
PIN code : 0000
Depending on the Bluetooth device type,
some device have a dierent pairing way.
,
Note
4. The orange LED is lit up for about 3 seconds
when this unit successfully paired with your
Bluetooth device.
5. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
y
When using Bluetooth® technology, you
have to make a connection between the
unit and the bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :
-
There is a obstacle between the unit and
the bluetooth device.
-
There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.
y
You should connect your Bluetooth device
to this unit again when you restart it.
y
When you select Bluetooth function again
after changing to other functions, Bluetooth
connection may be disconnected. You
should reconnect the bluetooth device to
use this function.
y
The sound may be interrupted when
the connection interfered by the other
electronic wave.
y
You cannot control the Bluetooth device
with this unit.
y
Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
y
Depending on the type of the device,
you may not be able to use the Bluetooth
function.
y
You can enjoy wireless system using phone,
MP3, Notebook, etc..
y
The more distant between the unit and
the bluetooth device, the lower the sound
quality becomes.
y
Bluetooth connection will be disconnected
when the unit is turned o or the bluetooth
device gets far from the unit.
y
When Bluetooth connection is
disconnected, connect the bluetooth device
to the unit again.
y
When not connected the Bluetooth, orange
LED is blinking.
,
Note
NB5630A-NS.DDEULLK_ENG.indd 17 2013-10-23 9:14:49
18
3
Operating
Operating
Other operations
Turn off the sound temporarily
You can mute your unit, for example, to answer the
telephone.
Press
on the remote control. Red LED blinks and
there is no sound on the unit.
To cancel it, press
again on the remote control or
change the volume level.
Adjust the woofer level
settings
You can adjust the sound level of the wireless
subwoofer. Press WOOFER LEVEL +/- on the
remote control.
If the woofer level reached a minimum or a
maximum, the red LED on the sound bar is lit
up when you adjust the woofer level of the
wireless subwoofer.
,
Note
3D Sound effect
3D Sound features deliver sound creating a
wider spot so you can enjoy more immersive and
cinematic surround sound.
Turn on or o 3D Sound eect by using 3D SOUND
ON/OFF on the remote control.
DRC (Dynamic range control)
Make the sound clear when you feel the volume is
too low.
Turn on or o DRC by using DRC ON/OFF on the
remote control.
Auto power down
This unit will turn itself o to save electric
consumption in the case were main unit is not
connected to external device and is not used for 25
minutes.
NB5630A-NS.DDEULLK_ENG.indd 18 2013-10-23 9:14:49
4 Troubleshooting
Troubleshooting
4
Troubleshooting
19
Troubleshooting
PROBLEM CAUSE & CORRECTION
No Power
y
The power cord is unplugged.
Plug in the power cord.
y
Check the condition by operating other electronic devices.
No sound
y
Incorrect input source is selected.
Check the input source and select the correct input source.
y
The mute function is activated.
Press
or adjust the volume level to cancel the mute function.
No woofer sound
y
The power cord of woofer is not connected.
Plug the power cord into the wall outlet securely.
y
Pairing between the unit and woofer gets disconnected.
Connect the unit and woofer. (Refer to the page 14.)
The remote control
does not work
properly.
y
The remote control is too far from the unit.
Operate the remote control within about (7 m).
y
There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
y
The battery in the remote control is exhausted.
Replace the battery with new one.
The Auto power on/
o function does not
work.
y
Depending on the connected device, this function may not operate.
When you sense that
outputted sound of
the unit is low.
Check the details below and adjust the unit according to them.
y
Switch [ON] state of DRC function to [OFF] by using remote controller.
y
With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting
on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
y
With the sound bar connected with Player, change the AUDIO DIGITAL OUT
setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
[BITSTREAM].
y
Change Audio DRC setting on Player setup menu to [OFF] state.
NB5630A-NS.DDEULLK_ENG.indd 19 2013-10-23 9:14:49
5 Appendix
Appendix20
Appendix
5
Specifications
General
Power requirements Refer to the main label on the main unit.
Power consumption Refer to the main label on the main unit.
Dimensions (W x H x D) (2240 x 52 x 27.7) mm
Net Weight (Approx.) 2.62 kg
Operating temperature 41 °F to 95 °F (5 °C to 35 °C)
Operating humidity 5 % to 90 %
Inputs
DIGITAL IN (OPTICAL IN) 3.0 Vrms (p-p), Optical jack
Available Digital Input Audio
Sampling Frequency
32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Amplier
Total output 310 W
Stereo mode 80 W + 80 W (4 Ω at 1 kHz)
Wireless subwoofer 150 W (3 Ω at 80 Hz)
THD 10 %
Wireless subwoofer
Power requirements Refer to the main label on the wireless subwoofer.
Power consumption Refer to the main label on the wireless subwoofer.
Type 1 Way 1 Speaker
Impedance 3 Ω
Rated Input Power 150 W
Max. Input Power 300 W
Net Dimensions (W x H x D) (296 X 332 X 296) mm
Net Weight 7.64 kg
y
Designs and specications are subject to change without prior notice.
NB5630A-NS.DDEULLK_ENG.indd 20 2013-10-23 9:14:49
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
The LG NB5630A soundbar delivers an immersive audio experience with its 3D Sound feature and Dynamic Range Control (DRC). It boasts a sleek design and can be easily mounted on a wall. LG Sound Sync technology allows you to control the soundbar's volume with your LG TV remote. Enjoy music from your Bluetooth devices with ease and adjust the sound level of the woofer speaker to your preference.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI