Uniden DECT3080 Owner's manual

UNIDEN

CORDLESS

TELEPHONES

DECT3080 SERIES

UP518BH(TRU9565-2) book OM 2.indi iUP518BH(TRU9565-2) book OM 2.indi i 1/21/2008 1:52:41 PM1/21/2008 1:52:41 PM

1

Table of Contents

Welcome .......................................................................4

Accessibility ..............................................................4

Installing the Phone ....................................................5

Choosing the Best Location ......................................5

Installing the Battery .................................................6

Connecting the AC adapter .......................................7

To the base ...........................................................7

To the charging cradle (for multi-handset packs

only) ..............................................................7

Charging the Handset ...............................................8

Connecting to the Phone Line ...................................9

Testing the Connection ...........................................10

Changing the dial mode .....................................11

Installing the Belt Clip ............................................. 11

Expanding Your Phone ...........................................12

Adding accessory handsets ...............................12

Registering accessory handsets ........................12

Using Multiple Bases ..............................................13

Registering the handset to another base ...........13

Selecting the base ..............................................14

Getting to Know Your New Phone ...........................15

Features ..................................................................15

Answering system features ................................15

Terminology Used in this Manual ............................16

Manual Conventions ...............................................16

Parts of the Handset ...............................................17

Parts of the Base ....................................................18

Using the Interface ....................................................19

Reading the Handset Display .................................19

Using the Four-way Function Key ...........................20

Using the Handset Menu ........................................20

Entering Text from Your Handset ............................21

Basic Setup ................................................................22

Selecting a Language .............................................22

Setting the Day & Time ...........................................22

Activating Personal Settings ...................................23

Activating the Key Touch Tone ................................23

Setting Up the Phonebook ........................................24

Creating Phonebook Entries ...................................24

Finding a Phonebook Entry .....................................25

Editing an Existing Phonebook Entry ......................26

Storing Caller ID or Redial Numbers in the

Phonebook .................................................26

Deleting a Single Phonebook Entry ........................26

UP518BH(TRU9565-2) book OM 2.ind1 1UP518BH(TRU9565-2) book OM 2.ind1 1 1/21/2008 1:52:49 PM1/21/2008 1:52:49 PM

2

Deleting all Phonebook Entries ...............................27

Copying Phonebook Entries to Another Handset ....27

Customizing Your Handsets .....................................28

Changing the Handset Banner ................................28

Selecting a Ringer Tone ..........................................28

Activating AutoTalk ..................................................29

Activating Any Key Answer .....................................29

Color Scheme .........................................................29

Wallpaper ................................................................30

Adjusting the Display (LCD Contrast) .....................30

Using Your Phone ......................................................31

Making a Call from the Phonebook .........................32

Chain dialing from the phonebook ......................32

Switching to the Handset Speakerphone

During a Call ...............................................32

Using Caller ID, Call Waiting, and Redial Lists .......33

Using the Caller ID List ..........................................33

Making a Call from a Caller ID Record ...................33

Seven-digit dialing ..............................................34

Deleting Caller ID Numbers ....................................34

Using Call Waiting ..................................................35

Redialing a Number ................................................35

Deleting a Redial Record ........................................35

Adjusting the Ringer, Earpiece and

Speaker Volume .............................................36

Adjusting the Ringer Volume ...................................36

Muting the Ringer (One call only) ...........................36

Adjusting the Earpiece Volume ...............................36

Adjusting the Speaker Volume ................................37

Adjusting the Audio Tone ........................................37

Finding a Lost Handset .............................................38

Using Hold, Conference and Transfer .....................38

Placing a Call on Hold .............................................38

Conferencing ...........................................................38

Transferring a Call...................................................39

Answering a transferred call ...............................39

Using Special Features .............................................40

Privacy Mode ..........................................................40

Using the Intercom ..................................................40

Making an intercom page ...................................40

Answering an intercom page ..............................41

Muting the Microphone ...........................................41

Tone Dialing Switch Over ........................................41

Using a Voice Mail Service .....................................42

Resetting the voice message waiting indicator ..42

Installing the Optional Headset ...............................42

UP518BH(TRU9565-2) book OM 2.ind2 2UP518BH(TRU9565-2) book OM 2.ind2 2 1/21/2008 1:52:49 PM1/21/2008 1:52:49 PM

3

Cleaning the charging contacts ..........................52

Battery replacement and handling .....................52

Power Failures ........................................................52

Troubleshooting ........................................................53

Common Issues ......................................................53

Resetting the Handset ............................................55

Resetting the Handset Without the Base ................56

Changing the Line Mode for Multiple Extensions ....57

Traveling Out of Range ...........................................57

Liquid Damage ........................................................58

Precautions! ..............................................................59

Rechargeable Nickel-Metal-Hydride Battery

Warning .....................................................59

Important Safety Instructions .................................59

The FCC Wants You To Know ................................60

Radio interference .............................................61

Cordless telephone privacy ................................61

I.C. Notice ...............................................................61

Terminal equipment ............................................61

Radio equipment ................................................61

One Year Limited Warranty .......................................62

Index.. ......................................................................... 63

Remote Operation Card ............................................65

Setting Up the Answering System ...........................43

Recording a Personal Greeting ...............................43

Selecting a Greeting ...............................................43

Deleting Your Personal Greeting .............................44

Selecting the Language for Announcements ..........44

Setting the Number of Rings ...................................45

Setting the Record Time (or Announce only) ..........45

Activating the Message Alert ...................................46

Activating the Base Call Screen ..............................46

Using the Answering System ...................................47

Turning Your Answering System On and Off ...........47

Reviewing Messages ..............................................48

Screening Calls .......................................................49

Turning Off the Message Alert Tone ........................49

Operating the Answering System While You Are

Away from Home ........................................49

Setting a security code or Personal Identiﬁ cation

Number (PIN) .............................................49

Dialing in to your answering system ...................49

Maintenance ...............................................................51

Speciﬁ cations ..........................................................51

Battery Information ..................................................51

Battery life ..........................................................51

Low battery alert ................................................52

UP518BH(TRU9565-2) book OM 2.ind3 3UP518BH(TRU9565-2) book OM 2.ind3 3 1/21/2008 1:52:49 PM1/21/2008 1:52:49 PM

4

Welcome

Thank you for purchasing a Uniden Multi-Handset phone.

Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ

from the actual unit.

As an Energy Star

®

Partner, Uniden has determined that this product or product models meets

the Energy Star

®

guidelines for energy efﬁ ciency. Energy Star

®

is a U.S. registered mark.

Uniden is a registered trademark of Uniden America Corporation.

Accessibility

Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer

service assistance or if you have any questions about how Uniden’s products can accommodate persons with

disabilities, please call the accessibility voice/TTY line: 1-800-874-9314.

Our customer care hours as well as accessibility information can be found on our website, www.uniden.com, under

the “Accessibility” link. If your call is received outside of our business hours, you can leave us a message and we will

call you back.

May be covered under one or more of the following U.S. patents:

4,797,916 5,426,690 5,491,745 5,493,605 5,533,010 5,574,727 5,581,598 5,650,790

5,660,269 5,663,981 5,671,248 5,717,312 5,732,355 5,754,407 5,758,289 5,768,345

5,787,356 5,794,152 5,801,466 5,825,161 5,864,619 5,893,034 5,912,968 5,915,227

5,929,598 5,930,720 5,960,358 5,987,330 6,044,281 6,070,082 6,076,052 6,125,277

6,253,088 6,314,278 6,321,068 6,418,209 6,618,015 6,671,315 6,714,630 6,782,098

6,788,920 6,788,953 6,839,550 6,889,184 6,901,271 6,907,094 6,914,940 6,940,867

6,953,118 7,023,176 7,030,819 7,146,160 7,203,307 7,206,403

Other patents pending.

UP518BH(TRU9565-2) book OM 2.ind4 4UP518BH(TRU9565-2) book OM 2.ind4 4 1/21/2008 1:52:50 PM1/21/2008 1:52:50 PM

5

Installing the Phone

Choosing the Best Location

When choosing a location for your new phone, here are some important guidelines you should consider:

Notes: For maximum range:

Keep both the base and handset antennas free of obstruction.

When the handset is not in use, place the handset in an upright position.

Metal and reinforced concrete may affect cordless telephone performance.

•

PLACE YOUR BASE

Near an AC outlet and

a telephone wall jack.

• Microwave ovens

• Refrigerators

• TVs

• Other electronics

• Direct sunlight

• Extreme temperatures

• Fluorescent

lighting

• Personal computers

• Wireless LAN

equipment

• Dust

• Excessive

moisture

• Other cordless

telephones

• Areas with

a lot of

background

noise

• Shock

• Vibration

In a centrally-located

open area.

TRY TO AVOID

• TVs

• Other electronics

• Direct sunlight

• Extreme temperatures

• Personal computers

• Wireless LAN

equipment

• Dust

• Excessive

moisture

• Areas with

a lot of

background

noise

• Shock

• Vibration

UP518BH(TRU9565-2) book OM 2.ind5 5UP518BH(TRU9565-2) book OM 2.ind5 5 1/21/2008 1:52:55 PM1/21/2008 1:52:55 PM

6

Installing the Phone

Installing the Battery

Use only the Uniden BT-1011 rechargeable battery pack supplied with your cordless telephone.

Locate the battery pack,

battery cover and the

handset.

Push the battery pack

connector in firmly. (You

should hear it click into

place.) Gently tug on the

battery wires to make

sure the connection is

secure.

Line up the red and black wires on

the battery pack connector with

the sticker in the handset’s battery

compartment.

Place the cover over the

battery compartment

and slide it up into

place.

Battery

pack

Battery

cover

Handset

Locate the battery pack,

battery cover and the

handset.

Push the battery pack

connector in firmly. (You

should hear it click into

place.) Gently tug on the

battery wires to make

sure the connection is

secure.

Line up the red and black wires on

the battery pack connector with

the sticker in the handset’s battery

compartment.

Place the cover over the

battery compartment

and slide it up into

place.

Battery

pack

Battery

cover

Handset

UP518BH(TRU9565-2) book OM 2.ind6 6UP518BH(TRU9565-2) book OM 2.ind6 6 1/21/2008 1:52:56 PM1/21/2008 1:52:56 PM

7

Installing the Phone

Connecting the AC adapter

To the base

To avoid risk of ﬁ re and shock, only use the Uniden PS-0009 AC adapter with the base.

Connect the AC adapter to the

DC IN 9V jack on the bottom

of the base.

Connect the AC

adapter to a

standard 120V

AC wall outlet.

Don’t put any power cord

where it people might trip

over it or step on it. If a

power cord becomes

chafed or worn out, it can

create a fire or electrical

hazard.

To the charging cradle (for multi-handset packs only)

Use only the Uniden PS-0007 AC adapter with the charging cradle.

AC

Place the cord

through the molded

wiring channel.

Connect the

adapter to a

standard 120V

AC wall outlet.

AC

Place the cord

through the molded

wiring channel.

Connect the

adapter to a

standard 120V

AC wall outlet.

UP518BH(TRU9565-2) book OM 2.ind7 7UP518BH(TRU9565-2) book OM 2.ind7 7 1/21/2008 1:52:57 PM1/21/2008 1:52:57 PM

8

Installing the Phone

Charging the Handset

Place the handset in the base

cradle with the display facing

forward.

If you have an accessory handset,

place it in the charging cradle with

the display facing forward.

Charge your handset at least 15 to 20 hours before plugging into the phone line.

Make sure that the charge

LED illuminates when the

handset is seated.

What if the charge LED doesn’t light up?

Reseat the handset; make sure the contacts

on the bottom of the handset are lined up

with the contacts in the cradle.

Check the AC adapter connection.

Make sure you are not using an outlet that s

controlled by a wall switch.

Make sure that the charge

LED illuminates when the

handset is seated.

Place the handset in the base

cradle with the display facing

forward.

If you have an accessory handset,

place it in the charging cradle with

the display facing forward.

Charge your handset at least 15 to 20 hours before plugging into the phone line.

Make sure that the charge

LED illuminates when the

handset is seated.

What if the charge LED doesn’t light up?

Reseat the handset; make sure the contacts

on the bottom of the handset are lined up

with the contacts in the cradle.

Check the AC adapter connection.

Make sure you are not using an outlet that s

controlled by a wall switch.

Make sure that the charge

LED illuminates when the

handset is seated.

UP518BH(TRU9565-2) book OM 2.ind8 8UP518BH(TRU9565-2) book OM 2.ind8 8 1/21/2008 1:52:58 PM1/21/2008 1:52:58 PM

9

Installing the Phone

Connecting to the Phone Line

Make sure that the battery pack is fully charged.

Connect the telephone

cord to the TEL LINE jack

on the bottom of the base.

Route the cord through

the molded wiring

channel.

Connect the

telephone

cord to a

telephone

wall jack.

What if CHECK TEL LINE appears on

the handset display?

The telephone cord may not be

connected correctly. Check the

telephone cord connection.

Do you have DSL or any high-speed Internet service

delivered through your phone line?

Try putting a DSL ﬁ lter between the base and the wall

jack. Without a ﬁ lter, telephone-line-based Internet

services can interfere with standard phones.

Telephone cord

Telephone wall jack

DSL filter

Telephone cord

Telephone wall jack

DSL filter

UP518BH(TRU9565-2) book OM 2.ind9 9UP518BH(TRU9565-2) book OM 2.ind9 9 1/21/2008 1:52:58 PM1/21/2008 1:52:58 PM

10

Installing the Phone

Testing the Connection

Pick up the handset from the cradle and press [ /ﬂ ash]. You should hear a dial tone, and the display should

show TALK.

What if I can’t hear a dial tone?

Check the telephone cord connection on the base.

What if the display doesn’t show TALK?

Check the battery pack connection in the handset.

Make sure the battery pack is fully charged.

Make sure the AC adapter cord is securely connected to the

DC IN 9V jack and a standard power outlet.

Try resetting the handset (see page 55).

Make a quick test call, and then press [

] to hang up.

What if there is a lot of static?

Check the sources of interference described in Choosing the

Best Location (see page 5): is the base near any of those?

What if the call doesn’t go through?

Try changing the dialing mode (see the next section).

Note: Make sure you can get a dial tone on any accessory handsets that were packaged with your phone.

•

UP518BH(TRU9565-2) book OM 2.ind10 10UP518BH(TRU9565-2) book OM 2.ind10 10 1/21/2008 1:53:00 PM1/21/2008 1:53:00 PM

11

Installing the Phone

Changing the dial mode

Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These

days, most base networks use a method called tone dialing, so your phone comes programmed for tone dialing. If

your phone company uses pulse dialing, you will need to change your phone’s dial mode. If you don’t get a dial tone

or can’t connect to the telephone network, please follow the steps below to modify your phone’s settings:

Press [Select/menu].

Select the GLOBAL SETUP menu, and then the DIAL MODE

submenu.

Scroll [

] to highlight PULSE.

Press [Select/menu]. You will hear a conﬁ rmation tone.

If you ever need to change the dial mode back to tone dialing, follow the same procedure, but select TONE in step 2.

NOW YOU ARE READY TO USE YOUR PHONE!

1)

2)

3)

4)

Installing the Belt Clip

Insert the tabs on the sides of the belt clip into the holes on either side of the

handset. Press the belt clip down until it clicks into place. (Tug on the clip to make

sure it’s secure.)

To remove the belt clip, gently pull the tabs out of the holes, then slide the belt clip

off of the handset.

UP518BH(TRU9565-2) book OM 2.ind11 11UP518BH(TRU9565-2) book OM 2.ind11 11 1/21/2008 1:53:02 PM1/21/2008 1:53:02 PM

12

Installing the Phone

Expanding Your Phone

Adding accessory handsets

Your phone supports a total of six cordless handsets, including any that were supplied with your phone. You can now

place a fully-featured cordless handset anywhere AC power is available to connect the charging cradle.

Your phone is compatible with the following Uniden DECT6.0 accessory handsets: DCX200, DCX300 and

DWX207. (Please visit our website at www.uniden.com for the most up-to-date list of compatible handsets.)

For instructions on connecting the charging cradle, see page 7.

If you purchase any accessory handsets separately, you must register the handsets to the base before you can

use them. (Accessory handsets that come packaged with a base are already registered to that base.)

Registering accessory handsets

When charged, registered handsets display a handset ID number.

Handsets that have not been registered display as shown.

To register a DCX300 accessory handset:

Charge the handset for 15-20 hours.

Place the handset in the base cradle for about thirty seconds. HANDSET

REGISTERING will appear in the LCD.

When the handset has registered to the base, the LCD will display

REGISTRATION COMPLETE then show the handset ID number.

If the display shows REGISTRATION FAILED, repeat the process again.

To register a DCX200 or DWX207 accessory handset:

Charge the handset for 15-20 hours.

Disconnect the base AC adapter. Then press and hold [ﬁ nd] while you reconnect the adapter. Keep pressing

[ﬁ nd] until the charge LED starts to blink.

On the handset, press and hold [#] until the handset beeps and displays HANDSET REGISTERING.

When the handset has registered to the base, the LCD will display REGISTRATION COMPLETE then show the

handset ID number.

•

1)

2)

3)

1)

2)

3)

4)

*CPFUGVPQV

TGIKUVGTGFRNCEG

JCPFUGVQPDCUG

VQTGIKUVGT

5GG[QWT1YPGTU

/CPWCNHQTJGNR

*CPFUGVPQV

TGIKUVGTGFRNCEG

JCPFUGVQPDCUG

VQTGIKUVGT

5GG[QWT1YPGTU

/CPWCNHQTJGNR

UP518BH(TRU9565-2) book OM 2.ind12 12UP518BH(TRU9565-2) book OM 2.ind12 12 1/21/2008 1:53:03 PM1/21/2008 1:53:03 PM

13

Installing the Phone

If the display shows REGISTRATION FAILED, repeat the process again.

Note: If a handset has ever been registered to a base, reset the handset before you register it to a new base (see

Resetting the Handset on page 55). Or to use multiple bases, see the next section.

Using Multiple Bases

The handsets supplied with your phone (or any DCX300 accessory handsets) can be registered to a total of four

different bases. Compatible bases include the DECT2060, DECT2080, DECT2085, DECT2088, and DECT3080

models. Once your handset is registered to more than one base, you can set the handset to search automatically the

available base, or you can select manually which base the handset should connect to (for example, if you have one

base with an answering machine, you can tell the handset to connect that base to check messages).

Note: To conﬁ rm how many bases the handset is registered to, open the SELECT BASE submenu (follow the step

1 of Selecting the base on page 14). Press [

] to close the list and return to standby.

Registering the handset to another base

Make sure the handset battery is fully charged.

To register a handset to DECT2060 , DECT2080 or DECT3080 base:

Disconnect the base AC adapter. Then press and hold [ﬁ nd hs] or [ﬁ nd] while you reconnect the adapter.

Keep pressing [ﬁ nd hs] or [ﬁ nd] until the charge LED starts to blink.

To register a handset to DECT2085 or DECT2088 base:

With the phone in standby, press [Menu/Select] on the base. Move the cursor to select the REGISTER

HANDSET menu, and then press [Menu/Select]. HANDSET REGISTERING will appear.

On the handset, press [Select/menu]. Select the REGISTER BASE menu. HANDSET REGISTERING will

appear in the display. (After step 2, you have thirty seconds to complete this step 3 before the system returns to

standby.)

Wait approximately thirty seconds. “REGISTRATION COMPLETE” will be displayed to indicate the handset has

been registered to the base and a handset ID will be automatically assigned.

If the display shows REGISTRATION FAILED, repeat the process again.

1)

2)

•

3)

4)

UP518BH(TRU9565-2) book OM 2.ind13 13UP518BH(TRU9565-2) book OM 2.ind13 13 1/21/2008 1:53:03 PM1/21/2008 1:53:03 PM

14

Installing the Phone

Selecting the base

When your handset is registered to another base, it will automatically connect to the base. A base ID (that is for the

handset only) will be assigned in the order of registration. You can either select a base you want to use manually, or

set to AUTO. If you set to AUTO, when the handset comes out of range, it searches automatically the available base

in order of base ID.

With the phone in standby, press [Select/menu]. Select the HANDSET SETUP menu, and then the SELECT

BASE submenu.

Move the cursor to select the base you want to connect to, or choose AUTO to have the handset automatically

select the base.

Press [Select/menu]. SEARCHING will appear in the display.

When the base is found, the handset will return to standby. If the base is not found, “SEARCHING” continues

to appear. You can repeat the procedure listed above to return back to the original connection or to ﬁ nd the

different base.

Note: You cannot change bases during a call.

1)

2)

3)

4)

UP518BH(TRU9565-2) book OM 2.ind14 14UP518BH(TRU9565-2) book OM 2.ind14 14 1/21/2008 1:53:04 PM1/21/2008 1:53:04 PM

15

Getting to Know Your New Phone

Features

1.9GHz DECT6.0 expandable system

Expands up to 6 handsets

Integrated digital answering system

Caller ID/Call Waiting

Advanced phonebook features on each handset:

Store 70 phonebook entries

Alphabetical search

Personalized ring by party

Personalized LCD color scheme by party.

Transfer single listing or entire phonebook

•

Store 30 Caller ID numbers on each handset

Speakerphone on handset

10 ringer options (5 tones/ 5 polyphonic melodies)

Last 5 number redial

Bilingual menu displays

(for US models: English and Spanish,

for Canadian models: English and French)

Call transfer

Conferencing

Intercom

•

Digital tapeless recording

Up to 14 minutes of recording time

Call screening

Personal or pre-recorded outgoing messages

Bilingual voice prompts

(for US models: English and Spanish,

for Canadian models: English and French)

•

Day and time announcement

Remote message retrieval

Toll saver

Message alert

Records up to 59 messages

•

Answering system features

UP518BH(TRU9565-2) book OM 2.ind15 15UP518BH(TRU9565-2) book OM 2.ind15 15 1/21/2008 1:53:04 PM1/21/2008 1:53:04 PM

16

Getting to Know Your New Phone

Terminology Used in this Manual

Accessory

Handsets

Additional handsets that can register to the base, allowing you to add handsets without connecting another

phone line. This base supports a total of six cordless handsets; see page 12 for compatible handsets.

Base The main part of the phone that connects to your phone line and lets you make and receive calls.

Charging

cradle

A cradle that comes with an accessory handset and charges the handset battery pack.

It connects to power but does not connect to a phone line.

CID

Caller ID is available from your telephone provider and is offered to users on a subscription basis.

With this service, you will be able to see the incoming caller information such as name and phone number.

CID/CW or

CIDCW

Caller ID with Call Waiting is available by subscription from your telephone provider.

With this service, you will be able to view incoming caller information while on a call with another user.

Global

Settings

Any settings that apply to all registered handsets and the base.

These features are available by selecting “GLOBAL SETUP” or “DAY & TIME” in the handset menu. Only

one handset can change global settings at a time, and you have to make sure the phone is not currently

being used. If you have multiple bases, the different bases have each global settings; select the base before

changing the global setting (see Selecting the Base on page 14).

Standby

The handset and the base are not in use. (It doesn’t matter whether the handset is in the cradle: the [

/ﬂ ash]

or [ ] hasn’t been pressed, and there is no dial tone.)

Station Any registered handset or the base.

Talk A dial tone has been enabled, so you can dial and carry on a conversation with an outside party.

Manual Conventions

This manual uses several different type styles to help you distinguish between different parts of the phone:

Bold text with “[ ]” indicates a key or button on the phone

ALL CAPITALS indicates text on the display, such as menu options, prompts, and conﬁ rmation messages

lower case bold text indicates a status light on the phone

ALL CAPITALS BOLD indicates a connection jack on the base or charging cradle

•

UP518BH(TRU9565-2) book OM 2.ind16 16UP518BH(TRU9565-2) book OM 2.ind16 16 1/21/2008 1:53:04 PM1/21/2008 1:53:04 PM

17

Getting to Know Your New Phone

Parts of the Handset

new message LED

Earpiece

Display (LCD)

[Int’com/clear] key

(intercom/clear)

[

] key (phonebook/left)

[ /ﬂ ash] key (talk/ﬂ ash)

[

/tone] key

[

/pause] key

(redial/pause)

Headset

jack cover

Belt clip hole

Speakerphone

speaker and

ringer

Battery

compartment

[

] key (up)

[Select/menu] key

[

] key

(caller ID/right)

[

] key (end call)

[

/mute] key

(messages/mute)

[

] key (down)

Twelve-key dial pad

[#] key

Microphone

Charging contacts

UP518BH(TRU9565-2) book OM 2.ind17 17UP518BH(TRU9565-2) book OM 2.ind17 17 1/21/2008 1:53:05 PM1/21/2008 1:53:05 PM

18

Getting to Know Your New Phone

Parts of the Base

[ﬁ nd] key (ﬁ nd handset)

Charging

contacts

charge LED

[

] key (delete)

[on] key (answering

system on/off)

message

counter LED

[

] key

(play/stop)

[

] key

(skip)

[

] key

(repeat)

Speaker

[+] key

(volume up)

[-] key

(volume

down)

UP518BH(TRU9565-2) book OM 2.ind18 18UP518BH(TRU9565-2) book OM 2.ind18 18 1/21/2008 1:53:06 PM1/21/2008 1:53:06 PM

19

Using the Interface

Reading the Handset Display

Day of the week

and time

Handset ID

and banner

Call duration

In standby During a call

570#/

*CPFUGV

The ringer off icon indicates that the ringer is turned off.

The voice mail icon appears when you have messages waiting at your service provider

voice mail box.

The speaker icon appears when the speaker phone is in use.

The CID icon appears when you have new Caller ID records.

The mute icon appears while the microphone is muted.

The privacy icon appears when the Privacy Mode is turned on.

The battery icon indicates the handset battery status: full, medium, low, and empty.

UP518BH(TRU9565-2) book OM 2.ind19 19UP518BH(TRU9565-2) book OM 2.ind19 19 1/21/2008 1:53:07 PM1/21/2008 1:53:07 PM

Page is loading ...

Uniden DECT3080 Owner's manual

Uniden DECT3080 Owner's manual

Related papers

Other documents