PCI-TMC12A Quick Start Guide ICP DAS CO., LTD.
1
The package includes the following items:
Step 1: Setup the Windows driver. The driver is located at:
The UniDAQ driver supports 32-/64-bit Windows 2K/XP/2003/Vista/7/8; it
is recommended to install this driver for new user:
CD: \NAPDOS\PCI\UniDAQ\DLL\Driver
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/driver/
The PCI-TMC12 series classic driver supports Windows 98/NT/2K and
32-bit XP/ 2003/ Vista/7/8. Recommended to install this driver for have
been used PCI-TMC12 series boards of regular user, please refer to :
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-tmc12a/manual/quick
start/classic/
For PCI-TMC12A
What’s in the shipping package?
English/ Jun. 2013/ Version 1.2
Installing Windows Driver
Software Utility CD
(V5.2 or later)
Quick Start Guide
(This Document)
PCI-TMC12A
CA-4002
D-Sub Connector
PCI-TMC12A Quick Start Guide ICP DAS CO., LTD.
2
Step 2: Click the “Next>” button to start the installation.
Step 3: Check your DAQ Card is or not on supported list, then click the
“Next>” button.
Step 4: Select the installed folder, the default path is C:\ICPDAS\UniDAQ ,
confirm and click the “Next>” button.
Step 5: Check your DAQ Card on list, then click the “Next>” button.
Step 6: Click the “Next>” button on the Select Additional Tasks window.
Step 7: Click the “Next>” button on the Download Information window.
Step 8: Select “No, I will restart my computer later” and then click the
“Finish” button.
For detailed information about the driver installation, please refer to Chapter
2.1 “Getting the UniDAQ Driver DLL Installer package” of the UniDAQ SDK
user manual.
Step 1: Shut down and power off your computer.
Step 2: Remove the cover from the computer.
Step 3: Select an unused PCI slot.
Step 4: Carefully insert your I/O card into the PCI slot.
Step 5: Replace the PC cover.
Step 6: Power on the computer.
After powering-on the computer, please finish the Plug&Play steps according
to the prompted messages.
Installing Hardware on PC
PCI-TMC12A Quick Start Guide ICP DAS CO., LTD.
3
CON1 Timer/Counter connector (Female DB37)
CON2 and Digital Input/Output connector (20-pin box header)
Pin Assignments
PCI-TMC12A Quick Start Guide ICP DAS CO., LTD.
4
1. Use CA-2002 (optional) to connect the CON2 with CON3.
2. The UniDAQ Utility.exe is located in:
This program (UniDAQ Utility) will be placed in the default path after completing
installation.
Default Path: C:\ICPDAS\UniDAQ\Driver\
Double click the “UniDAQUtility.exe”
Double-Click
1
Self-Test
CN3
CN2
CA-2002
PCI-TMC12A Quick Start Guide ICP DAS CO., LTD.
5
3. Execute the UniDAQ Utility Program.
4. Get DIO function test result.
Confirm the PCI-TMC12A series card had
successfully installed to PC. It starts from 0.
2
Click this button
to start test.
3
Select the “Port 0”
Check channel 0, 2, 4, 6
6
5
Click “Digital Output” item.
4
PCI-TMC12A Quick Start Guide ICP DAS CO., LTD.
6
PCI-TMC12A series card product page:
http://www.icpdas.com/root/product/solutions/pc_based_io_board/pci/pci-tmc12a.html
CA-2002 page (optional):
http://www.icpdas.com/products/Accessories/cable/cable_selection.htm
Documentation and Software:
CD:\NAPDOS\PCI\UniDAQ\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/
Related Information
PASS
Select the “Port 0”
8
The corresponding D/I becomes red for
channel 0, 2, 4, 6 of D/O is ON.
Click “Digital Input” item.
7
9
/