2U AND 3U L-SHAPE INSTALLATION STEPS
1 2U and 3U L –Shape Installation Steps
The following is a list of items shipped in your rack installation kit. If any items are
missing or damaged, contact your dealer or vendor.
2 x L-Shape
4 x M5*P0.8 L=25mm
Long Screws
16 x M5*0.8 L=14.0mm
Round Head Screws
4 x I-Head
M4.P0.7L=6.0mm
12 x M5 Cabinet Cage Nuts
P/N: PW0020000000357 Version 1.1
2U AND 3U L-SHAPE INSTALLATION STEPS
2 2U and 3U L –Shape Installation Steps
Applicable Models: Applicable to the present Simbolo and EPICa 2U and 3U various
models.
Types of Applicable Cabinets:
1. Only suitable to cabinets with depth 900mm ~ 1100mm
2. Only suitable to sheet metal brace type cabinet (Figure 1) and not suitable
for aluminum brace push type cabinet (Figure 2).
Figure 1: Sheet metal brace type cabinet
Figure 2: Aluminum brace push type cabinet
2U AND 3U L-SHAPE INSTALLATION STEPS
3 2U and 3U L –Shape Installation Steps
Step 1:
Loosen the screws M5×0.8 (2 screws on each side; total 4 screws) to
facilitate the sliding of L-Shape.
L-Shape Relative Position:
RR (Rear Right)
RL (Rear Left)
FL (Front Left)
FR (Front Right)
Loosen 4 screws to
adjust L-Shape
2U AND 3U L-SHAPE INSTALLATION STEPS
4 2U and 3U L –Shape Installation Steps
Step 2:
Transfer the L-Shape in the cabinet’s fixed column. Adjust the L-Shape’s length, so
that the L-Shape position and the cabinet’s column holes are aligned. With the
column holes of cabinet aligned with the L-Shape, fix the L-Shape into the column
holes using M5×0.8 L = 14mm screws (4 screws on one side; total 8 screws on two
sides, including front and rear) according to the machine (subsystem) type shown
in the table below (Table 1).
¾ Right Front View (Front Left is the same)
Type-A Type-B Type-C
¾ Right Rear View (Rear Left is the same)
All Models
Top
2U AND 3U L-SHAPE INSTALLATION STEPS
5 2U and 3U L –Shape Installation Steps
Note:
1. Please verify the machine (subsystem) type and follow the column holes’
position of installing screws to avoid the machine obstructing the column
holes in front side.
2. In the rear side, all models follow the same position of fixing the screws in
the column holes. The M5 Cabinet Cage Nuts can be used to lock the M5
x 0.8L=14mm screws in place.
Step 3:
To lock the L-Shape, tighten the screws M5×0.8 (2 screws on each side; total
4 screws) that were loosened in Step 1. This will complete the installation of
L-Shape.
Table 1: Applicable Machine Type
Type Machine (Subsystem) Model
Type-A
EPICa 3U All Models (Including RAID and NAS)
Simbolo 3U All Models (Including RAID and NAS)
Type-B EPICa 2U All Models (Including RAID and NAS)
Type-C Simbolo 2U All Models (Including RAID and NAS)
2U AND 3U L-SHAPE INSTALLATION STEPS
6 2U and 3U L –Shape Installation Steps
Step 4:
Before inserting the machine on the cabinet, remove first the disk trays to lighten
the weight of the machine.
Note: All machine models are installed in the L-Shape in the same way. The
following example is for 3U EPICa model.
2U AND 3U L-SHAPE INSTALLATION STEPS
7 2U and 3U L –Shape Installation Steps
Step 5:
Place the machine in the horizontal support surface of the L-Shape and push into
the cabinet.
2U AND 3U L-SHAPE INSTALLATION STEPS
8 2U and 3U L –Shape Installation Steps
Step 6:
Tighten the screw M5 * 0.8 L= 25mm (one screw in each side; total two
screws) to fix the machine into the cabinet.
Note: For the position of each screw and the number of screws used for the
various machine models, please refer to the table below (Table 2).
Step 7:
Insert the disk trays into the machine to complete the installation.
2U AND 3U L-SHAPE INSTALLATION STEPS
9 2U and 3U L –Shape Installation Steps
Table 2: Machine Type, Screw Hole Position, and Number of Screws to Use
Machine
Type
Screw Hole Fix Position
Number
of
Screws
EPICa 3U
All models
(including
RAID and
NAS)
EPICa 2U
All models
(including
RAID and
NAS)
2
Simbolo 3U
All models
(including
RAID and
NAS)
4
Simbolo 2U
All models
(including
RAID and
NAS)
2
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
ACTi PSTR-0201 Rail Kit Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Proware EP-m501-AA Owner's manual
-
-
-
-
-
-
-
-
-