Proper installation
~
Do not use the machine until
properly installed.
~
Do not install the machine in an area
where a danger of explosion or of
freezing temperatures may be present.
~
To ensure the stability of
undercounter dishwashers, they must
only be installed beneath a continuous
countertop that is bolted to the adjacent
cabinetry.
~
In order to reduce the risk of
damage from condensation, the
furniture in the area around the
appliance should be designed for
commercial use.
Technical safety
~
Installation and repair work should
be performed by a qualified and trained
service technician in accordance with
local and national safety regulations.
Work by unqualified persons could be
dangerous and may void the warranty.
~
Before installation or service,
disconnect the power supply to the
work area by unplugging the unit,
"tripping" the circuit breaker or
removing the fuse.
~
When work has been performed on
the supply plumbing, the supply line to
the commercial dishwasher must be
bled.
Otherwise, the water softening system
may be damaged.
~
Untrained personnel must not be
permitted to operate the commercial
dishwasher. Operating personnel must
receive regular training.
~
Before using the appliance, check
for visible external damage. Never
operate a damaged dishwasher. A
damaged dishwasher can jeopardize
your safety!
~
Do not install or use a damaged
dishwasher. A damaged machine is
dangerous. Unplug the machine and
call your Miele dealer or the Miele
Technical Service Department.
~
The appliance should only be
repaired by Miele Customer Service, an
authorized Miele dealer or an
appropriately qualified technician.
Otherwise the warranty becomes null
and void.
~
Defective components must be
replaced with genuine Miele spare
parts only. Only these parts are
guaranteed by Miele to comply with
safety requirements.
~
Do not connect the appliance to the
electrical power supply until all the
installation work has been completed,
including adjustment of the door spring.
~
Be certain this machine is properly
installed and grounded by an
authorized technician. To guarantee the
electrical safety of this machine,
continuity must exist between the
machine and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system
checked by a qualified technician.
IMPORTANT SAFETY INSTRUCTIONS
8