2. Tripp Lite
  3. SRVRTRAIL23 Wide Mounting Rail Kit

Tripp Lite SRVRTRAIL23 Wide Mounting Rail Kit Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Tripp Lite SRVRTRAIL23 Wide Mounting Rail Kit Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Owner’s Manual
Parts List
Installation
23” Wide Mounting Rail Kit for
Tripp Lite Extra-Wide Rack Systems
Model: SRVRTRAIL23
The SRVRTRAIL23 Mounting Rail Kit allows standard 19” wide rackmounting capabilities to be converted into 23” wide
rackmounting capabilities, typically seen in Telco applications. This kit is intended for installation into Tripp Lite Extra-Wide Rack
Systems (Models: SR42UBWD and SR42UBDPWD).
1111 West 35th Street • Chicago, IL 60609 USA
www.tripplite.com/support
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice.
Copyright © 2010 Tripp Lite. All rights reserved.
201001057 • 93-2972
WARRANTY
REGISTRATION:
register online today for a
chance to win a FREE Tripp Lite
product—www.tripplite.com/warranty
1
Each rail in your current rack system is connected to the
enclosure with 6 screws and washers—1 pair in the upper
beam
A
, 1 pair in the middle beam
B
and 1 pair in the
lower beam
C
. Remove these screws and washers, followed
by the rail itself. Repeat for the other 3 rails.
2
Replace each rail with one from the new kit, using a supplied
M4 screw and lock washer to secure it, in the reverse order
from the previous step—1 pair in the upper beam
A
, 1 pair
in the middle beam
B
and 1 pair in the lower beam
C
.
Note: Just as with your previous rails, the attachment points are
numbered
D
to help you align each rail at its appropriate depth.
Mounting Rails (4) M4 Self-Tapping Screws (24) Lock Washers (24)
A A
B B
C C
4 5 6 3 4 5 6 7 8 9 0 1 2 3 4 5 6
8
4 5 6 3 4 5 6 7 8 9 0 1 2 3 4 5 6
8
1 2
D
/