*40780189 - 02*
1.
2.
3.
©
DIGITAL IN
DIGITAL IN
DIGITAL IN
M-16DX
40780189 2MP
Attaching the Ferrite Cores
You must attach the ferrite cores before using the M-16DX.
If you connect digital devices to the M-16DX’s coaxial connectors (DIGITAL IN/OUT), you
must attach the included ferrite cores to the cables connected to DIGITAL IN and DIGITAL
OUT.
Not only should you attach a ferrite core near the M-16DX’s DIGITAL OUT, you also need
to attach one near the DIGITAL IN of the digital device you’re connecting.
This is for the purpose of preventing electromagnetic noise; do not remove it.
1.
Attach the ferrite cores to the
coaxial cables.
* You must attach them near the M-16DX/
digital device.
2. Wrap the coaxial cables
around the ferrite cores; one
turn is enough.
3. Press the halves together
until they click shut.
* Be careful not to pinch your fingers when attaching the ferrite cores.
* Do not damage the cables by pinching them excessively with the ferrite cores.
Copyright © 2007 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of
ROLAND CORPORATION.
DIGITAL IN
Digital Device
DIGITAL IN
Digital Device
DIGITAL IN
Digital Device
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- 日本語: Roland M-16DX 取扱説明書
Related papers
Other documents
-
Edirol FA-66 Attachment Manual
-
-
-
-
-
-
-
Tektronix WFM5200 series Instructions Manual
-
Tascam BO-32DE Owner's manual
-
Hitachi CMP4201 User manual