Homelite UT10568 Owner's manual

Type
Owner's manual

This manual is also suitable for

Homelite ut10548, ut10568, ut10588 chainsaws are powerful tools designed for various cutting tasks. With their 2-cycle engines, they offer reliable performance and easy starting. These chainsaws feature a 50:1 fuel-to-oil ratio, ensuring proper lubrication and reducing maintenance needs. Equipped with a durable bar and chain, they can handle tough cutting jobs efficiently. Safety features like the chain brake and anti-vibration system enhance user safety and control.

Homelite ut10548, ut10568, ut10588 chainsaws are powerful tools designed for various cutting tasks. With their 2-cycle engines, they offer reliable performance and easy starting. These chainsaws feature a 50:1 fuel-to-oil ratio, ensuring proper lubrication and reducing maintenance needs. Equipped with a durable bar and chain, they can handle tough cutting jobs efficiently. Safety features like the chain brake and anti-vibration system enhance user safety and control.

HOW TO GET STARTED
988000564
3-9-12 (REV: 02)
CALL
1-800-242-4672
www.homelite.com
Make The Most Of Your Purchase!
For any questions about operating or maintaining your product, call the Homelite Help Line !
Your Product has been fully tested prior to shipment to ensure your complete satisfaction.
Troubleshooting tips are available in your operator's manual.
Go to www.homelite.com and register your new tool on-line.
IMPORTANT: It is normal for chain saws to have bar and chain lubricant under the chassis after operating
the saw. This bar and chain lubricant is coming from the clutch cover area and is NOT an indication of a
leak. The clutch cover area must be saturated with lubricant to properly lubricate the bar and chain and
to ensure the long-term durability of your new chain saw.
®
1
Press fully and release
PRIMER BULB 7 times.
9
10
Add bar lubricant to oil tank.
Set ignition switch to
RUN (I) position.
Pull CHOKE lever to the
FULL position.
DEPRESS throttle release
then SQUEEZE and release throttle trigger.
Pull STARTER grip and rope until
engine runs.
1 GALLON
GAS
1
2
3
4
5
6
Above 50
º
F - Pull STARTER 3 times
Below 50
º
F - Pull STARTER 5 times
7
BAR
OIL
8
Push choke lever to
RUN position.
x7
Note: Allow the saw to run in this position
15-30 seconds, depending upon the temperature.
50:1 Ratio = Mix 2.6 oz of 2-cycle engine lubricant (provided)
with 1 gallon of fresh gasoline in separate gas container.
SHAKE. Pour into fuel tank.
O
WARNING: This Engine Starting Procedure is not a substitute for
reading the operator’s manual. To reduce the risk of injury, user must
read and understand operator’s manual before using this product.
  • Page 1 1
  • Page 2 2

Homelite UT10568 Owner's manual

Type
Owner's manual
This manual is also suitable for

Homelite ut10548, ut10568, ut10588 chainsaws are powerful tools designed for various cutting tasks. With their 2-cycle engines, they offer reliable performance and easy starting. These chainsaws feature a 50:1 fuel-to-oil ratio, ensuring proper lubrication and reducing maintenance needs. Equipped with a durable bar and chain, they can handle tough cutting jobs efficiently. Safety features like the chain brake and anti-vibration system enhance user safety and control.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI