SATO Samark PB1 User manual

SATO
Brand
SATO
Model
Samark PB1
Type
User manual

SATO Samark PB1 is a reliable handheld labeling solution that allows users to easily tag products. Lightweight and ergonomic, these handheld labelers are intuitive to use, allowing end users to smoothly manage operations. With its ability to print up to 10 characters per line, the SATO Samark PB1 is perfect for a variety of labeling applications, including pricing, coding, and identification. The SATO Samark PB1 is also incredibly durable, with a long lifespan and the ability to withstand even the harshest environments.

SATO Samark PB1 is a reliable handheld labeling solution that allows users to easily tag products. Lightweight and ergonomic, these handheld labelers are intuitive to use, allowing end users to smoothly manage operations. With its ability to print up to 10 characters per line, the SATO Samark PB1 is perfect for a variety of labeling applications, including pricing, coding, and identification. The SATO Samark PB1 is also incredibly durable, with a long lifespan and the ability to withstand even the harshest environments.

CORPORATE
10350-A Nations Ford Rd
Charlotte, NC 28273
Phone: (704) 644-1650
Fax: (704) 644-1662
[email protected]
©2017 SATO America. All rights Reserved. Rev A • Specications subject to change without notice • Any unauthorized
reproduction of this content, in part or whole, is strictly prohibited • SATO is a registered trademark of SATO Corporation
and its subsidiaries in Japan, the U.S. and other countries. All other trademarks are the property of their respective owners.
UNITED STATES
CANADA
LABEL MANUFACTURING, SERVICE & SALES
CENTRAL AMERICA
CARIBBEAN
MEXICO
HANDHELD LABELING
SOLUTIONS
PB1-105 PB1-106 SAMARK
Maintenance
• Scheduled cleanings are highly recommended
to avoid troublesome operation caused by paper
dust and adhesive residue
• Clean print head with a soft, dry toothbrush
• Do not use lubricants or detergents to clean your
Handheld Labeler
• Do not re-ink used ink roller
• Do not place the tool, label or ink roller in a high
humidity environment or above 40°C/104°F
Troubleshooting
Labels are not properly fed
• Squeeze the trigger rmly and completely
• Re-load labels according to the instructions in
this guide
• Conrm that you are using genuine SATO labels
• Be sure the tools have been properly maintained
• Check to see if the labels are damp
No print appears on the labels
• Use a new ink roller
• Squeeze the tool handle lever completely to
print a label
• Use genuine SATO ink rollers
• Push pointer back rmly to it’s original positon
There are dots and dust spots on labels
• Clean the application roller and printhead to
remove any stray ink and dust
Corporate Prole
Handheld Labeling Solutions
SATO is a pioneer and leading global provider
of integrated Automatic Identication and Data
Collection solutions that leverage barcode and
RFID technologies.
SATO manufactures innovative, reliable auto-
identication systems and offers complete
solutions to businesses by integrating hardware,
software, consumables and maintenance services.
SATO’s solutions enable businesses to realize
precision, labor and resource savings that help
preserve the environment and deliver peace of
mind to consumers. All of which contribute to the
development of a sustainable world.
Today, SATO continues its tradition of designing
and manufacturing high quality printing systems,
including its legendary line of hand labeler products
that deliver reliable, unparalleled performance.
INSTRUCTION MANUAL
www.satoamerica.com/hls
Handheld Labeling Solutions
Open the Label Roll Door.
1
Lift the marked tab of the tool’s
door to open the bottom of
the tool.
2
After opening the door, gently
lift the pressure plate and pull to
open up the entire tool.
3
Take the roll of labels and
remove one round, eliminating
any glue, simplifying the loading
process.
4
Drop the labels down the center
of the tool, gently feeding the
end through until it slides out the
bottom.
5
After securing the roll of labels
onto the spindle and placing
the guide on top of the roll of
labels, close the label roll door.
6
Flip the tool upside down. Align
the labels within the guide and
tightly close the pressure plate.
7
Pull the labels back, aligning the
label’s tab with the reel’s knob.
Close the door on the bottom of
the tool. It is now ready to use.
8
Loading Label Rolls
Pull the ink roller
assembly up.
1
While supporting the ink
roller assembly with one
hand, gently slide the ink
roller off to the side.
2
Take the fresh ink
roller and slide it
onto the assembly.
3
Gently release the assembly
allowing it to spring back
into place. The tool is now
ready to use.
4
Replacing Ink Roller
Pull the pointer in or out as
required and rotate to select
print character.
1
Push the pointer back to its
original position.
2
Setting Print Characters
A reliable Handheld Labeling Solution, the PB1 and
Samark Series allow users to easily tag products.
Lightweight and ergonomic, these handheld labelers
are intuitive to use, allowing end users to smoothly
manage operations.
Label Roll Cover
Tool Door
Tool Door
Ink Roller Assembly
Handle
  • Page 1 1
  • Page 2 2

SATO Samark PB1 User manual

SATO
Brand
SATO
Model
Samark PB1
Type
User manual

SATO Samark PB1 is a reliable handheld labeling solution that allows users to easily tag products. Lightweight and ergonomic, these handheld labelers are intuitive to use, allowing end users to smoothly manage operations. With its ability to print up to 10 characters per line, the SATO Samark PB1 is perfect for a variety of labeling applications, including pricing, coding, and identification. The SATO Samark PB1 is also incredibly durable, with a long lifespan and the ability to withstand even the harshest environments.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents