FMI RFK-CEF26 Operating instructions

INSTALLATION INSTRUCTIONS

CEF26BN RETRO FIT KIT

MODEL RFK-CEF26

• Remove screw and glass retainer clip from front of glass. With gloves and safety glasses, remove the

glass front by tilting top out and lifting up on glass. Place glass on smooth soft surface to avoid

breakage.

• Starting from the left hand side of the fireplace, align template as shown. Drill two holes using a #28

(0.14 dia.) size bit; drill bit is not included in the kit.

• Align arch plate with holes as shown and attach with screws provided.

• Insert corner shim as shown.

• Repeat steps for the right hand side.

Parts included with this kit:

Part No. Description Qty.

118198-01 RH template 1

118198-02 LH template 1

118199-01 Instruction Sheet 1

11164 # 8 x ½ screw 4

118200-01 Arch plate 1

118345-01 Corner Shim 2

2701 Industrial Drive

P.O. Box 90004 118199-01

Bowling Green, KY 42102-9004 REV A

www.desatech.com

11z/05

WARNING: Always disconnect power and allow the fireplace to cool before

performing any cleaning or maintenance. Turn controls OFF and remove plug from outlet.