Channel Vision C-1312 User manual

Channel Vision
Brand
Channel Vision
Model
C-1312
Type
User manual

This manual is also suitable for

500-044 RevB1
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for ten
years from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
(800) 840-0288 toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
10
CV
HANNEL ISION
TM
Central
C-1312
CV
HANNEL ISION
TM
Central
C-1311
C-1311 & C-1312
Universal Product Holders
2
The universal product holders
can be used to mount both
square and irregularly shaped items.
Rotate the product
to find the best fit.
The and are universal product holders which
can be used to mount a variety of products inside the
Channel Vision Central structured wiring enclosure.
C-1311 C-1312
CV
HANNEL ISION
TM
Central
C-1311
CV
HANNEL ISION
TM
Central
C-1312
Tighten thumbscrews
to secure product.
M
a
ki
ng a
dj
ustments
* By removing the thumb screws and
reversing the position of the adjustable
plate (as shown below), you can
increase the maximum depth to 3.25”.
3
Foam padding
helps cushion
equipment
2” max. depth *
2” max. depth *
4.75”
11.25”
Loosen thumb screws
to adjust the depth
of the C-1311 or C-1312
CV
HANNEL ISION
TM
Central
C-1311
CV
HANNEL ISION
TM
Central
C-1312
3.25” max. depth *
CV
HANNEL ISION
TM
Central
C-1312
  • Page 1 1
  • Page 2 2

Channel Vision C-1312 User manual

Channel Vision
Brand
Channel Vision
Model
C-1312
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents