VocoPro DIGITAL-31-ULTRA Below you will find brief product information for VocoPro DIGITAL-31-ULTRA. This top-of-the-line device is perfect for those who demand the best possible sound quality. With its advanced digital technology, the DIGITAL-31-ULTRA delivers crystal-clear audio that is sure to impress even the most discerning listener.
But the DIGITAL-31-ULTRA is more than just a great-sounding speaker. It is also incredibly versatile, with a variety of features that make it perfect for any situation.
VocoPro DIGITAL-31-ULTRA Below you will find brief product information for VocoPro DIGITAL-31-ULTRA. This top-of-the-line device is perfect for those who demand the best possible sound quality. With its advanced digital technology, the DIGITAL-31-ULTRA delivers crystal-clear audio that is sure to impress even the most discerning listener.
But the DIGITAL-31-ULTRA is more than just a great-sounding speaker. It is also incredibly versatile, with a variety of features that make it perfect for any situation.
owner's manual
Digital-31-Ultra
2
Table of Contents
FCC Information ...................................................... 3
Listening for a Lifetime ............................................. 4
Safety Instructions ................................................... 5
Welcome ............................................................... 6
Getting Started ....................................................... 7
Getting Connected ................................................... 8
Discriptions and Functions ...................................... 13
Features .............................................................. 16
Troubleshoot ........................................................ 17
3
FCC Information
1. IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!: This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Vocopro may void your authority, granted by the FCC, to
use this product.
2. IMPORTANT: When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable(s) supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void your
FCC authorization to use this product in the U.S.A.
3. NOTE: This product has been tested and found to
comply with the requirements listed in FCC Regulations,
Part 15 for Class "B" digital devices. Compliance with
these requirements provides a reasonable level of
assurances that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices. This equipment generates/uses
radio frequencies and, if not installed and used
according to the instructions found in the owner's
manual, may cause interference harmful to the
operation of other electronic devices. Compliance with
FCC regulations does not guarantee that interference
will not occur in all installations. If this product is found
to be the source of interference, which can be
determined by turning the unit "Off" and "On", please try
to eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being
affected by the interference.
Use power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter(s).
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300-ohm ribbon
lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact your local retailer authorized to
distribute Vocopro products. If you can not locate the
appropriate retailer, please contact Vocopro, 1728
Curtiss Court, La Verne, CA 91750.
1. To ensure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2. Install your unit in a cool, dry, clean place - away from
windows, heat sources, and too much vibration, dust,
moisture or cold. Avoid sources of hum (transformers, v
motors). To prevent fire or electrical shock, do not
expose to rain and water.
3. Do not operate the unit upside-down.
4. Never open the cabinet. If a foreign object drops into
the set, contact your dealer.
5. Place the unit in a location with adequate air
circulation. Do not interfere with its proper ventilation;
this will cause the internal temperature to rise and may
result in a failure.
6. Do not use force on switches, knobs or cords. When
moving the unit, first turn the unit off. Then gently
disconnect the power plug and the cords connecting to
other equipment. Never pull the cord itself.
7. Do not attempt to clean the unit with chemical solvents:
this might damage the finish. Use a clean, dry cloth.
8. Be sure to read the "Troubleshooting" section on
common operating errors before concluding that your
unit is faulty.
9. This unit consumes a fair amount of power even when
the power switch is turned off. We recommend that you
unplug the power cord from the wall outlet if the unit is
not going to be used for a long time. This will save
electricity and help prevent fire hazards. To disconnect
the cord, pull it out by grasping the plug. Never pull the
cord itself.
10. To prevent lightning damage, pull out the power cord
and remove the antenna cable during an electrical
storm.
11. The general digital signals may interfere with other
equipment such as tuners or receivers. Move the
system farther away from such equipment if
interference is observed.
NOTE:
Please check the copyright laws in your country
before recording from records, compact discs,
radio, etc. Recording of copyrighted material may
infringe copyright laws.
CAUTION
The apparatus is not disconnected from the AC power
source so long as it is connected to the wall outlet,
even if the apparatus itself is turned off. To fully ensure
that the apparatus is indeed fully void of residual power,
leave unit disconnected from the AC outlet for at least
fifteen seconds.
CAUTION:
READ THIS BEFORE OPERATING YOUR UNIT
Voltage Selector (General Model Only)
Be sure to position the voltage selector to match the
voltage of your local power lines before installing the
unit.
110V
4
Selecting fine audio equipment such as the unit youʼve just purchased is only the start of your
musical enjoyment. Now itʼs time to consider how you can maximize the fun and excitement your
equipment offers. VocoPro and the Electronic Industries Associationʼs Consumer Electronics
Group want you to get the most out of your equipment by playing it at a safe level. One that lets
the sound come through loud and clear without annoying blaring or distortion and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to a higher volume of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
• Pay attention to the different levels in various recordings.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,
we want you listening for a lifetime.
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and
the Electronic Industries Associationʼs Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise. This list of sound levels is included for your protection.
Some common decibel ranges:
Level
30
40
50
60
70
80
Example
Quiet library, Soft whispers
Living room, Refrigerator, Bedroom away from traffic
Light traffic, Normal Conversation
Air Conditioner at 20 ft., Sewing machine
Vacuum cleaner, Hair dryer, Noisy Restaurant
Average city traffic, Garbage disposals, Alarm clock at 2 ft.
The following noises can be dangerous under constant exposure:
Level
90
100
120
140
180
Example
Subway, Motorcycle, Truck traffic, Lawn Mower
Garbage truck, Chainsaw, Pneumatics drill
Rock band concert in front of speakers
Gunshot blast, Jet plane
Rocket launching pad
-Information courtesy of the Deafness Research Foundation
Listening for a Lifetime
5
CAUTION
RISK OF SHOCK
CAUTION: To reduce the risk of electric
shock, do not remove cover (or back). No
user-serviceable parts inside. Only refer
servicing to qualified service personnel.
WARNING
To reduce the risk of fire or electric shock, do
not expose this unit to rain or moisture.
Explanation of Graphical Symbols
The lightning flash & arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of danger.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and servicing instructions.
1. Read Instructions - All the safety and operating
instructions should be read before the appliance is
operated.
2. Retain Instructions - The safety and operating
instructions should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in
the operating instructions should be adhered to.
4. Follow Instructions - All operating and use
instructions should be followed.
5. Attachments - Do not use attachments not
recommended by the product manufacturer as they
may cause hazards.
6. Water and Moisture - Do not use this unit near water.
For example, near a bathtub or in a wet basement and
the like.
7. Carts and Stands - The appliance should be used
only with a cart or stand that is recommended by the
manufacturer.
7 A. An appliance and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause an overturn.
8. Ventilation - The appliance should be situated so its
location does not interfere with its proper ventilation.
For example, the appliance should not be situated on a
bed, sofa, rug, or similar surface that may block the
ventilation slots.
9. Heat - The appliance should be situated away from
heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers)
that produce heat.
10. Power Sources - The appliance should be
connected to a power supply only of the type
described in the operating instructions or as marked
on the appliance.
11. Grounding or Polarization - Precautions should be
taken so that the grounding or polarization means of
an appliance is not defeated.
12. Power-Cord Protection - Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where
they exit from the appliance.
13. Cleaning - Unplug this unit from the wall outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
14. Power lines - An outdoor antenna should be
located away from power lines.
15. Nonuse Periods - The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
16. Object and Liquid Entry - Care should be taken so
that objects do not fall and liquids are not spilled into
the enclosure through openings.
17. Damage Requiring Service - The appliance should
be serviced by qualified service personnel when:
A. The power supply cord or plug has been damaged; or
B. Objects have fallen into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally
or exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
18. Servicing - The user should not attempt to service
the appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
Note:
To CATV system installer's (U.S.A.): This reminder is
provided to call the CATV system installer's attention to
Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected as close to the point of
cable entry as practical.
Safety Instructions
And thank you for purchasing the Digital-31-Ultra from VocoPro, your ultimate choice in
Karaoke entertainment! With years of experience in the music entertainment business,
VocoPro is a leading manufacturer of Karaoke equipment, and has been providing
patrons of bars, churches, schools, clubs and individual consumers the opportunity to
sound like a star with full-scale club models, in-home systems and mobile units. All our
products offer solid performance and sound reliability, and to reinforce our commitment
to customer satisfaction, we have customer service and technical support professionals
ready to assist you with your needs. We have provided some contact information for
you below.
VocoPro
1728 Curtiss Court
La Verne, CA 91750
Toll Free: 800-678-5348
TEL: 909-593-8893
FAX: 909-593-8890
VocoPro Company Email Directory
Customer Service & General Information
Tech Support
Remember Our Website
Be sure to visit the VocoPro website www.vocopro.com for the latest information on
new products, packages and promos. And while you're there don't forget to check out
our Club VocoPro for Karaoke news and events, chat rooms, club directories and even
a KJ Service directory!
We look forward to hearing you sound like a PRO, with VocoPro, the singer’s ultimate
choice.
FOR YOUR RECORDS
Please record the model number and serial number below, for easy reference, in case of loss or theft. These
numbers are located on the rear panel of the unit. Space is also provided for other relevant information
Model Number
Serial Number
Date of Purchase
Place of Purchase
Welcome
7
Getting Started
WHAT’S IN THE BOX:
- Handheld Microphone
- Bodypack Transmitter
- Headset Microphone
- Instrument Cable
- Digital-31 Single Channel Receiver
- Power Adapter
- ¼” Cable
8
Getting Connected
VocoPro has factory synced the wireless microphone(s) and receiver to provide an
out-of-the-box plug and play convenience. The following re-sync procedure is only
necessary if:
1. The wireless microphone connection is constantly dropping out or experiencing
outside interference.
2. You intend to use multiple sets of the DIGITAL-31-32-34 simultaneously and
therefore must custom select each individual frequency.
*NOTE:
When using multiple systems together, please verify that each receiver/microphone
pairing is synced to a different frequency channel. There are a total of nine factory
preset frequency channels.
9
Getting Connected
Syncing Microphones to Receiver
Handheld Microphone:
1. Power on handheld microphone
2. Remove battery cover from microphone by twisting counter-clockwise
3. Aim bottom of microphone IR sensor within 6 inches of the receiver IR sensor
4. Press and hold CH button (Receiver RF LED and Microphone LED will Blink)
5. A solid RF LED will indicate that the microphone has successfully connected to the newly set
IR Sensor
10
Getting Connected
Syncing Microphones to Receiver
Body-Pack Transmitter
1. Power on Body-Pack Transmitter
2. Open Battery compartment by pinching tabs inward and lowering door forward
3. Aim Sync LED within 6 inches of the receiver IR sensor LED
4. Press and hold CH button (Receiver RF LED and Body-Pack LED will Blink)
5. A solid RF LED will indicate that the body-pack has successfully connected to the newly set RF
channel.
IR Sensor
11
Getting Connected
TO CONNECT TO A MIXER
BALANCED XLR
1. Connect balanced XLR cable (not included) to the balanced outputs of the Digital-31-Ultra
receiver.
2. Connect each end of the XLR cable into individual microphone input jacks on a mixer to be
used (Mic 1).
Note: Example illustrated is for clarity only. For ease of operation, attach the channel 1 output to
the channel 1 input on a mixer and the channel 2 output to the channel 2 input on a mixer.
UNBALANCED 1/4”
Connect 1 unbalanced 1/4” cable (included) to the Unbalanced output from the Digital-31-Ultra
receiver.
Connect the other end of the 1/4” cable to a microphone input channel on a mixer.
POWER-IN
DC:12-18V
MIXED OUT BALANCED
POWER-IN
DC:12-18V
MIXED OUT BALANCED
12
Receiver
FRONT PANEL
1. Power ON/OFF Switch - Powers the receiver off/on.
2. IR- Infrared sensor used for syncing wireless mics (see getting connected pg 8 & 9)
3. Display- shows the current frequency channel setting
4. RF- LED illuminates when microphone is successfully connected.
5. CH- press to change frequency channel (see getting connected pg 8 & 9 for more advanced
operations)
6. Volume knob- Adjusts overall Microphone volume. Turn clockwise to increase (+) and Counter-
Clockwise to decrease (-)
1
2 3
5 6
4
Descriptions and Functions
13
Descriptions and Functions
REAR PANEL
1. Antenna- built in receptacle for catching RF signal
2. Balanced Mic Out - Outputs microphone signal via XLR cable to mixer or amplifier.
3. Unbalanced Out - Outputs mic signal via 1/4 cable to a mixer or amplifier.
4. POWER IN- Connect power adapter here
POWER-IN
DC:12-18V
MIXED OUT BALANCED
1
2
3
4
14
HANDHELD MICROPHONE
1. Mic Head - Picks up vocals
2. Mic ON/OFF/MUTE Switch – Hold to power microphone on/off. (on indicated by green LED)
a.) MUTE – Push button once to mute the mic element but leave microphone powered on.
This is indicated by a red LED.
3. Mic LED - Indicates microphone operational status (ON/MUTE/OFF)
4. Battery Compartment - Insert two (2x) AA batteries here to provide power.
1
2
3
4
Descriptions and Functions
15
BODY-PACK TRANSMITTER
1. Antenna- assists with frequency transmission
2. LED- Indicates body-pack operational status (ON/MUTE/OFF)
3. ON/OFF/MUTE Switch – Hold to power body-pack on/off. (on indicated by green LED)
a.) MUTE – Push button once to mute body-pack audio transmission. This is indicated by a
red LED.
4. Mini XLR (TA3F male)- connect headset or instrument cable accessory here.
5. Battery Compartment- Insert two (2x) AA batteries here to provide power
6. Sync- this is the IR sensor used when syncing the body-pack to a new frequency.
Descriptions and Functions
16
FEATURES
• Each receiver comes packaged with Wireless Handheld Microphones as well as body pack
transmitter with headset microphone and instrument cable for added versatility
• 9 channel PLL frequencies designed to not interfere with each other
• Integrate up to 9 systems with revolutionary “one-touch” IR sync
• Utilizes the Sparsely Used 900mHz Frequency Band
• 24-Bit Digital Technology delivers Clean, Professional Quality Signal
• Individual Digital Microphone IDs Eliminate Channel Cross-Talk
• Wide Frequency Response (50 - 20,000 Hz) Ensures Natural Sounding Vocals
Features
17
Troubleshooting Tips
There is no power
• Make sure the power cord is firmly connected to the power outlet.
• If using a power strip/surge-protector, make sure that it is plugged in and switched on.
*Please be advised that it is safe practice to power the DIGITAL-31/32/34 on in the following
fashion:
1. Plug the power adapter into the “DC In” receptacle on the rear panel
2. Plug DC power adapter into wall outlet or surge protector/power strip
3. Press and Hold Power button on front of DIGITAL-31/32/34 receiver.
What do I do if my Microphones are cutting in and out?
• Make sure both antennae are firmly attached to their posts.
• Keep the receiver away from fluorescent lights.
• Make sure microphones are being used within the operational range.
• Ensure batteries are not depleted.
There’s a thumping noise coming through the speakers, what is it?
• This typically occurs when the batteries are low.
• Less likely, it may be the power supply not providing the correct power.Try a suitable
replacement adapter with same values to confirm.
• If problem persists, please call Vocopro for further instructions.
The lights on the receiver are flashing off and on continuously, what’s going on?
• Ensure the correct power supply is used with the receiver.
• Inspect power supply cable for frayed wires or loose connections.
• Find a suitable replacement for the original power supply; contact Vocopro for factory
original parts at 800-678-5348.
Caution: To Avoid Battery Leakage
• Be sure to insert batteries correctly and follow the microphone and battery manufacturer’s
instructions.
• Never mix old batteries with new batteries
• Never mix alkaline, standard (carbon-zinc) or rechargeable batteries
• Always remove exhausted or dead batteries from the microphone or body-pack
• Remove batteries if you must store the unit away for long periods of time
Troubleshoot
Notes
Digital-31-Ultra Owner’s Manual
© VocoPro 2018
v1.0510
www.vocopro.com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
VocoPro DIGITAL-31-ULTRA Below you will find brief product information for VocoPro DIGITAL-31-ULTRA. This top-of-the-line device is perfect for those who demand the best possible sound quality. With its advanced digital technology, the DIGITAL-31-ULTRA delivers crystal-clear audio that is sure to impress even the most discerning listener.
But the DIGITAL-31-ULTRA is more than just a great-sounding speaker. It is also incredibly versatile, with a variety of features that make it perfect for any situation.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
VocoPro Digital-34-AI Owner's manual
-
-
-
-
-
VocoPro MOBILEMAN 1 Owner's manual
-
-
-
-
