Polaroid PDM-0742 User manual

7” Swivel Screen Portable DVD Player

PDM-0743

Operation Manual

20051227

2

CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE.

POWER SUPPLY:

Connect the supplied adapter to the side of the DVD player in the slot marked “Power

In”. Plug the two-prong end of the power cord to an AC100-240V outlet. If you have

difficulty inserting the plug, turn it over and reinsert it, if the unit will not the used for a

long time, disconnect the plug from the outlet.

NOTE:

Before plugging the power cord into an AC outlet, make sure that all the connections

have been made.

Important Safety

Instructions

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric to

p

ersons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accom

p

an

y

in

g

the a

pp

liance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE.

CAUTION: Laser radiation when open. Do not stare into beam.

3

CAUTION: These servicing instructions are for use by qualified service personnel only.

To reduce the risk of electric shock, do not perform any servicing other than that

contained in the operating instructions unless you are qualified to do so.

Refer to service manual for servicing instructions.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use near water.

6) Clean only with dry cloth.

7)

Do not block any ventilation openings. Maintain well ventilated conditions around

the product, Do not put product on bed, sofa or anything that blocks ventilation.

Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide blade or the third prong is

provided for your safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of

time.

14) Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

15) Apparatus shall not be exposed to dripping or splashing and no objects filled with

liquids, such as vases, shall be placed on the apparatus.

Note: Do not touch the color TFT LCD screen by hand directly.

Important Safety

Instructions

4

Copyright Protection

This product incorporates copyright protection technology that is protected by U.S.

patents and other intellectual property rights. Use of this copyright protection

technology must be authorized by Macrovision, and is intended for home and other

limited viewing uses only unless otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

Region code information

DVD players and discs are coded by region. If the region number described on the

DVD disc does not correspond to the region number of this product, this product cannot

play the disc. The region code of this unit is 1.

IMPORTANT FOR LASER PRODUCT

S

1. CLASS 1 LASER PRODUCT

2. DANGER: Visible laser radiation when open and

interlock failed or defeated. Avoid direct exposure to

beam.

3. CAUTION: Do not open the top cover. There are no

user serviceable parts inside the unit. Leave all

servicin

g

to

q

ualified service

p

ersonnel.

Important Safety

Instructions

5

High-quality audio and video

Advanced Playing Functions

Other Special Functions

Excellent sound: Dolby Digital

Decoder delivers great sound.

A

V input: External Audio, Video

input can be connected to most

external AV sources.

AV Output: Analog audio output can

be connected to external amplifier.

On-Screen Display: You can choose

from multiple languages for the

On-Screen Display language.

Compatibility: Compatible DVD, CD

and JPEG discs, etc.

Particular Performance:

Multi-speed, fast forward, fast

backward, slow playback and

repeated playback.

Search by Time: Search for a

certain track of a disk by selected

time.

Last Memory Playback: Memorizes

the stopped playback track and

continues playing the disk from this

spot when the power is on. (Only

available for DVD and CD disc).

Special Functions: Supports screen

multi-angle viewing, zooming

function and foul language filtering

function

.

High Resolution: MPEG-2 decoding

format achieves more than 500 lines

of horizontal resolution.

Power Adapter Switch:

Automatically adapts to voltage

requirements in U.S and other

countries.

Features

6

Accessories List

ITEM NAME QTY

Remote Control (with battery) 1

Power Supply Cord with AC Adapter 1

Rechargeable Battery Pack 1

DC Adapter (Car Adapter) 1

Audio/Video Cable 1

Earphone 1

Bag 1

Operation Manual 1

NOTE

：

Accessories and their parts numbers are subject to change without prior notice.

Accessories

7

……………………………………………..2

………………………………………….….5

………………………………………….….6

………………………………………..…...8

…………………………………….… ….10

…………………………………………....11

…………………………………………....12

…………………………………………....13

……………………………………..……..16

…………………………………..………..18

………………………………………..…..19

………………………………………..…..22

……………………………………..……..23

…………………………………………....24

…………………………………………....27

…………………………………….…….. 28

…………………………………………... 30

……………………………………….…...34

…………………………………………... 35

…………………………………………... 37

DVD Playback

CD Playback

JPEG Playback

Troubleshooting

Specifications

System Setup

Definition

Contents

Important Safety Instructions

Features

Notes on Discs

Playback Operation

Remote Control

Power Supply Preparation

Rechargeable Battery

System Connections

Accessories

View of Front Panel

View of Side Panels

View of Bottom Panel

Revolving LCD Screen

8

View of Front Panel

9

1. LCD screen

2. //+ Button

: Press to select different items.

: Press to pause the playback.

+: Press the Mode button and then press this button to increase the level of

brightness, contrast and color.

3. //- Button

: Press to select different items.

: Press to stop playback. Then press the (PLAY) button to resume playback

from the stopped spot. Press this button twice to stop playback completely.

-: Press the Mode button and then press this button to decrease the level of

brightness, contrast and color.

4. // Button

: Press to select different items.

: Press and hold it for several seconds to search backward fast.

: Press to return to the previous list/track/chapter.

5. // Button

: Press to select different items.

: Press and hold it for several seconds to search forward fast.

: Press to go to next list/track/chapter.

6. ENT/(PLAY) button

ENT: Press to confirm selection.

(PLAY): Press to start playback.

7. Speaker

8. Disc tray cover

When the disc is loaded gently press the cover to close it.

9. MENU Button

Press to access the DVD disc menu during playback.

10. SETUP Button

Press to access or exit the system setup menu.

11. MODE Button

Press to enter the brightness, contrast or color adjusting mode.

Press and hold for several seconds to change the aspect ratio among 16:9,4:3

16:9 overturn and 4:3 overturn.

12. ZOOM button

Press to realize various zoom functions.

13. OPEN Switch

Push to open the disc tray cover.

14. SLOW button

Press to activate slow playback function.

15. A-B Repeat button

Press to play a section of the disc from point A to point B.

16. Remote Sensor

17. Charge Indicator

Light is red when the battery is being charged; green when it is fully charged.

View of Front Panel

10

Right Side View

1. Volume Control knob

Used to adjust the volume of the headphone and speaker.

2. Headphone Jack

Used to connect to headphones for private listening. When headphone is plugged,

the speakers will turn off automatically.

3. Audio Input/Output Jack

For connecting to an external amplifier or audio source.

4. Video Input/Output Jack

for connecting to an external monitor or video source.

5. AV IN/OUT Switch

Switch to “IN” to input external Audio/Video signal. Switch to “OUT” to play disc or

output AV signal.

6. DC 9.5/12V Input Jack

Used to connect the DC 9.5/12V adaptor.

Left Side View

1. HOLD button

Push the HOLD switch to lock the function of all the buttons on the front panel.

(except the POWER and OPEN switches)

2. Power ON/OFF Switch

Switch the power on or off.

View of Side Panels

11

1. Rechargeable Battery Contacts

For connecting the rechargeable battery pack.

View of Bottom Panel

12

Revolving Steps

The revolving LCD screen is one of the outstanding features about this product. We’d

like to suggest you to take the following steps for proper operation.

Pos. A

1. Open the screen cover to position

(A) as shown in left figure at which

the screen is vertical to the operation

panel.

Pos. B

2. Revolving the screen horizontally

about it’s axis in the clockwise only.

The maximum revolving degree is

180 (position C). If you want to return

to initial position (A), please revolve

screen counter clockwise until it

clicks.

Pos. C

3. You can rotate the screen vertically

from position C to the operation panel

as indicated in left fig.

Pos. D

4. The final rotating position (position D)

at which the screen facing upward

and back to operation panel.

Revolving LCD Screen

13

1. MUTE button

Press to turn off or on the speaker output.

2. INFO button

Press repeatedly to display or cancel the detailed information of the disc during

playback.

3. TITLE button

Press to display title menu if it exits in the disc.

4. Direction button

Press to select different options.

5. ENTER button

Press to access playback or confirm your selection.

6. SETUP button

Press to enter the player’s setup menu.

Remote Control

14

7. 0-9 number buttons

Select numbers by pressing these buttons.

8.  NEXT button

Press to skip to the next list, track or chapter.

9.  PREV button

Press to return to the previous list, track or chapter.

10. SUBT button

When playing a DVD coded with multi-subtitles, press to select a subtitle

language or to turn subtitles off.

11. ANGLE button

Press to access various camera angles if the DVD disc contains multiple camera

angles.

12. A-B button

Press to play a section of the disc from point A to point B. Press once to select the

starting point A, press again to select the end point B. During A-B repeat playback,

press this button to stop the repeat.

13. ZOOM button

Press to realize various zoom functions.

14. REP button

Press to repeat a chapter, title or the entire disc.

15. MENU button

Press to access the DVD disc menu during playback.

16. PAUSE button

Press to pause playback. Press the PLAY button to resume normal playback.

17. STOP button

Press to stop playback. Then press the PLAY button to resume playback from the

stopped spot. Press this button twice to stop playback completely.

18. PLAY button

Press to start playback.

19. +10 button

select number greater than 9 by pressing the (+10) button first, and then

additional number buttons as needed.

20. GOTO button

Press to select the desired disc starting time, title or chapter.

21.  REV SCAN button

Press to search backward fast during playback.

22.  FWD SCAN button

Press to search forward fast during playback.

23. SLOW button

Press to activate slow playback function.

24. AUDIO button

Press to select different languages when a DVD disc with multiple audio

languages is played. Press to select different audio track when a CD disc is

played.

Remote Control

15

Preparation of Remote Control

Follow the steps below to install the battery.

1. Pull the battery holder out from the remote control in the direction of the arrow.

2. Load a new battery properly with the (+) sided up.

3. Insert the battery holder back into the remote control.

Battery type: CR2025 3V

Battery service life: approximately 1 year under normal use (at room temperature).

Use of Remote Control

Point the remote control unit to the remote sensor within the range of 16 feet and

angles of 60 degree, and without obstacles between remote control and remote sensor.

Remote Control

Note

¾ Improper use of the battery may cause

overheating, explosion or ignition, which

can result in an injury or a fire. Battery

leakage may damage the remote control.

¾ Do not expose the remote control unit to

direct sunlight.

¾ Do not recharge, disassemble, deform or

heat the battery.

¾ Do not put the battery in fire or water.

¾ Immediately replace the exhausted

battery.

¾ Take out battery when the remote is not in

use for a long time.

16

z Always ensure that the DVD player, TV and any other electrical equipment to be

connected with are switched off and unplugged from the power supply.

z Ensure that you observe the color coding when connecting audio and video

cables.

Connecting to TV

Follow the drawing below to connect the DVD player to TV's Audio/Video input with

Audio/Video cable.

Connecting to An Amplifier

Refer to your audio equipment's manual before connection.

Follow the drawing below to connect the DVD player to AV amplifier.

System Connections

17

Connecting to External AV Source

The player supports an AV signal input function. Use the audio/video cable to connect

the unit to an external AV signal source such as a DVD, VCR etc. After connecting,

switch the DVD/AV IN to AV IN.

NOTE: Noise may occur in speakers when there is an external audio signal input while

playing a DVD disc. Unplug the audio cord to clear the noise.

Connecting to the Headphones

Connect the headphones to the headphone jack on either side of the player.

When headphone is connected, the speakers will automatically turn off.

System Connections

18

Using the AC Adapter

The player is supplied with an AC adapter for powering the unit and charging the

battery.

Note: 1. Turn player's power off before unplugging.

2. In the case of using the adapter, the LCD screen will be brighter than using the

rechargeable battery.

Using of Car Adapter

The player is supplied with a Car Adapter for powering the unit and charging the battery

in a vehicle.

Attention

¾ Do not operate the unit or view video software while driving a vehicle.

¾ Place the unit in a proper position for viewing.

¾ Detach battery pack when using the AC or car adapter as power source.

¾ Disconnect the player from the Car Adapter when starting the vehicle.

1. Connect AC adapter to the left side of

the DVD player in the jack marked DC

9.5/12V IN as shown on the right.

2. Plug the two-prong end of the power

cord into a grounded electrical outlet.

The power indicator lights red.

Connect the car adapter power plug to

the unit's power jack and the other end to

the vehicle’s 12V accessory/cigarette

lighter socket as the right figure.

Power Supply Preparation

19

About Rechargeable Battery Pack

Your portable DVD player comes with a lithium ion rechargeable battery that attaches

to the bottom of the DVD player. Charge the battery fully before initial use. Charging

time is normally about 5 hours. A fully charged battery delivers about 3 hours of use but

playing time varies from disc to disc. If the battery will not be used for a long period of

time, charge the battery fully before storage.

Working conditions and precautions for the rechargeable battery

¾ New battery should be fully charged before initial use.

¾ Battery should only be used and charged when temperature is between 32-100F.

¾ Never put the battery in fire or water.

¾ Do not expose the battery to high temperature or store in hot, sunny place.

¾ Maintain well-ventilated conditions around the product to avoid overheating.

Don’t put the product on a bed, sofa or anything that may block ventilation to the

product.

¾ Do not short the battery terminals.

¾ Do not open the battery.

¾ Detach the battery after charging is complete. When charging the battery pack,

the charge light will turn red, when the charging is complete, the light will turn

green.

¾ Detach the battery when it is not in use.

¾ When the charge of the battery is weak, low power indicator will appear on the

LCD screen. The player will turn off automatically several minutes later.

Warning:

Do not touch any metal object to the battery connectors, as it will put the battery in

standby mode. To exit the standby mode, connect the battery and DVD player to AC or

DC power.

Rechargeable Battery

20

Attaching the Battery Pack

Refer to the following steps for attaching the Battery Pack:

1. With one hand on the DVD Player to prevent it from moving, take the battery and

align the plastic tabs on the battery pack with holes on the player, and push the

battery pack into the DVD Player.

2. Slide the Battery Pack until you hear it click and lock into place.

Charging the Battery Pack

The battery pack must be attached to the DVD player to charge it by using the supplied

AC Power Adapter.

1. Attach the battery pack to the DVD player.

2. Plug the supplied AC Power Adapter into the player’s power jack marked with “DC

9.5/12V IN”, which is located on right side of the DVD Player.

3. Plug the other end of the AC Power Adapter Cord into a household AC Outlet as

shown below:

Rechargeable Battery

Page is loading ...

Polaroid PDM-0742 User manual

This manual is also suitable for

Polaroid PDM-0742 User manual

Related papers

Other documents