7
USAGE OF FLOOR NOZZLE
FOR RUG / FLOOR SELECTO R
Before use make sure that the position of the selector is in the right position for
the type of surface to be cleaned.
Select the carpet indicator ➀ when cleaning carpets.
Select flat surface indicator ➁ when cleaning the floors, tiles, etc.
FOR UNIVERSAL B R U S H
Use the floor nozzle for all cleaning surfaces.
NOTE: For optimum eff i c i e n c y, clean floor brush with crevice tool.
TROUBLE SHOOTING
P R O B L E M C A U S E R E M E D Y
Motor does not start. No power supply. Check cable, plug and
s o c k e t .
Suction force is gradually F i l t e r, nozzle, suction hose Remove the object.
d e c r e a s i n g . or tube is blocked.
Cord does not rewind fully. Check that the cord is not Pull the cord out 2~3m &
twisted or wound unevenly. push down the cord rewind
b u t t o n .
This Vacuum cleaner is approved the following
EMC Directive : 89/336/EEC, 92/31EEC and 93/68/EEC
EN 61000-3-2 : 1995, EN 55014 : 1993 and EN 55104 : 1995
Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC
IEC 335-1, IEC 335-2-2, EN 60335-1 and EN 60335-2-2
DJ68-00006D REV
(
0 . 1
)
7400/ENG-00006D 1/18/01 4:26 PM Page 8