EAW CXA120 User manual

EAW
Brand
EAW
Model
CXA120
Type
User manual

This manual is also suitable for

EAW CXA120 is a single-channel 120 W power amplifier. It's designed for continuous duty in various applications like speech, music, paging, and sound reinforcement that require high performance, flexible features, and rugged dependability. It features two actively balanced inputs and outputs for 4 ohms, 25 V, 70 V, and 100 V. The smart output stage protects the amplifier against permanent damage caused by overloading, shorts, and extreme temperatures. The front panel provides controls for master volume, bass, and treble, as well as a meter that indicates the output signal level.

EAW CXA120 is a single-channel 120 W power amplifier. It's designed for continuous duty in various applications like speech, music, paging, and sound reinforcement that require high performance, flexible features, and rugged dependability. It features two actively balanced inputs and outputs for 4 ohms, 25 V, 70 V, and 100 V. The smart output stage protects the amplifier against permanent damage caused by overloading, shorts, and extreme temperatures. The front panel provides controls for master volume, bass, and treble, as well as a meter that indicates the output signal level.

Part No. SW0141 Rev. B 07/07
DESCRIPTION
The CXA120 is designed for continuous duty in speech, music,
paging, and sound reinforcement applications demanding high
performance, exible features, and rugged dependability. Screw
terminals provide connections for the two, discrete, actively
balanced inputs. The main program input is a conventional input,
featuring a 0 dB (Main) / –20 dB (Aux) sensitivity switch for low-
level and high-level input signals. The second telephone/paging
input has voice-activated priority over the main program input as
well as a volume trim control.
The CXA120 provides outputs for 4 ohm loads and for 25 V, 70 V,
and 100 V distributed systems. The output stage is designed with
smart circuitry that protects against permanent damage caused
by overloading, shorts, and extreme temperatures. Front panel
controls include master volume, bass, and treble. The bass and
treble controls provide shelving equalization at 100 Hz and 10 kHz.
The front panel meter indicates the output signal level, ranging
from –20 dB to +6 dB.
The CXA120 operates on 115 V or 230 V AC mains determined by
a voltage select switch. A 24 V DC power input allows connecting
backup battery power with automatic AC to DC switchover. Five
year warranty.
CXA120
SINGLE CHANNEL 120 W POWER AMPLIFIER
• Discrete component 120 W power amplifier
• Convectioncoolingforquietoperation
• Twoactivelybalancedinputs
• Voiceactivatedpriorityoverride
• 2rackunitmountingkitincluded
Features
•PagingSystems •HousesofWorship
•HotelandBallrooms •MeetingRooms
•Schools •Oces
•Foreground/BackgroundMusicSystems
Applications
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX 425.485.1152 | Page 1 of 2
GND
AC FUSE
T 2.5A
115VAC/230VAC – 60Hz/50Hz
DC SW
ON OFF
POWER INPUT OUTPUT
MAIN AUX
BALANCED INPUT
BAL1
COM
BAL2
TEL
VOL
010
5
TEL PAGING
TR
G
COM
FUSE: AC 220-240V~ 2.5A
DC 24V 15A
PMAX 360VA
P.A. AMPLIFIER
© 2004 LOUD TECHNOLOGIES INC.
"EAW" IS A REGISTERED TRADEMARK
OF LOUD TECHNOLOGIES INC.
AV I S RIS QUE D E CHO C ELE CTRI QUE- NE PAS OUV RIR.
'
INSTRU CTIO N MAN UAL.
ELEC TRIC SHOC K HAZ ARD. DO NO T RE MOVE COVE R.
REFE R SER VICI NG TO Q UALI FIED PERS ONNE L. SE E
CAUTION:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WA RNING: SHOCK HAZ ARD - DO NOT OPEN
AV I S:
RISQUE DE CHOC ELECTRIQU E
- NE PAS OUVRIR
NO-OUTDOOR USE
WARNING
DC 24V
COM 25V 70V 100V
4
CXA120-AMPLIFIER
CXA120-AMPLIFIER
OUTPUTVOLUMEEQ
HILO
0
--
10
++
POWER
-20 -10 -6 -3 0 +3 +6 dB
ON
OFF
11 5
Part No. SW0141 Rev. B 07/07
PERFORMANCE
Inputs (balanced / unbalanced)
Sensitivity Impedance
Main 1 V / 0.5 V 10k ohm
Aux 100 mV / 50 mV 20k ohm
Tel/Paging Variable 300 ohm
Output
Maximum Load Impedance
Low Z 120 W 4 ohm
High Z 25 V / 70 V / 100 V 15 ohm / 42 ohm / 83
ohm
Operating Range (+/-3 dB)
Main In to Amp Out 50 Hz to 15 kHz
Noise
Main In to Amp Out >75 dB (below maximum output)
Distortion (THD, 120 W @ 1 kHz)
<0.5%
CXA120
SINGLE CHANNEL 120 W POWER AMPLIFIER
PHYSICAL
Front Controls
Type Range
Equalization Lo +/-10 dB @ 100 Hz
Hi +/-10 dB @ 10 kHz
Master Volume Level 0 to 10
Power Switch ac mains On / Off
Rear Controls
Power Switch 24 V DC On / Off
Main/Aux Sensitivity Switched 0 dB / –20 dB
Tel/Paging Input Level 0 to 10
Mains Power
Rating Fuse
ac (50/60 Hz)
115 V / 230 V (+/-5%)
2.5 A fuse
DC 24 V 15 A fuse
Power Input 285 W
Environmental
Maximum Ambient 131° F / 55° C
Humidity Non-precipitating
Dimensions (inches / mm)
H x W x D 3.5 x 17.1 x 13.2 89 x 435 x 335
Height with feet 3.9 100
Weight (approximate net lb / kg)
19.4 8.8
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX 425.485.1152 | Page 2 of 2
  • Page 1 1
  • Page 2 2

EAW CXA120 User manual

EAW
Brand
EAW
Model
CXA120
Type
User manual
This manual is also suitable for

EAW CXA120 is a single-channel 120 W power amplifier. It's designed for continuous duty in various applications like speech, music, paging, and sound reinforcement that require high performance, flexible features, and rugged dependability. It features two actively balanced inputs and outputs for 4 ohms, 25 V, 70 V, and 100 V. The smart output stage protects the amplifier against permanent damage caused by overloading, shorts, and extreme temperatures. The front panel provides controls for master volume, bass, and treble, as well as a meter that indicates the output signal level.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents