Blaze BLZKMDOSDSH4 Operating instructions

Assembly Instructions

KAMADO SIDE SHELF KIT: BLZ-KMDO-SDSH

• Your kamado side shelf kit includes two side shelves. Each shelf is identical and can be installed

on either side of the grill. You will need the included metric # 5 + # 6 millimeter allen wrench to

install.

1. Each side shelf has two brackets welded off to the right and left of the shelf itself. These

brackets fasten to the grill body via the four fasteners pre-installed on the grill body just below

the cooking grid surface. Place the openings in the brackets over the fasteners and slide

downward. See images below:

2. Once the shelf brackets are properly positioned over the fasteners, tighten the fasteners with

the included #5 mm allen wrench.

3. Underneath the shelf, you will find a shelf leveling / stabilizing screw. This screw holds tension

against the grill body leveling the shelf and holding it securely in this position. Tighten this screw

either by hand or using the #6 mm allen wrench. When complete, the shelf should be level. See

below:

This manual is also suitable for