Varytec BAT.CHARGER 4 Battery Charger Quick start guide

Varytec
Brand
Varytec
Model
BAT.CHARGER 4 Battery Charger
Type
Quick start guide

Varytec BAT.CHARGER 4 Battery Charger

The Varytec BAT.CHARGER 4 Battery Charger is a high-quality device designed to charge up to four rechargeable batteries simultaneously. It is compatible with Bat series batteries and Makita BL 1013 batteries, making it a versatile option for a wide range of applications.

With its compact design and lightweight construction, the BAT.CHARGER 4 is easy to transport and store. It features four individual charging slots, each with its own charging indicator. This allows you to monitor the charging status of each battery independently.

The BAT.CHARGER 4 utilizes advanced charging technology to ensure fast and efficient charging. It can fully charge four batteries in just 4-5 hours. The charger also includes a float charging function, which helps to maintain the charge of fully charged batteries without overcharging them.

Varytec BAT.CHARGER 4 Battery Charger

The Varytec BAT.CHARGER 4 Battery Charger is a high-quality device designed to charge up to four rechargeable batteries simultaneously. It is compatible with Bat series batteries and Makita BL 1013 batteries, making it a versatile option for a wide range of applications.

With its compact design and lightweight construction, the BAT.CHARGER 4 is easy to transport and store. It features four individual charging slots, each with its own charging indicator. This allows you to monitor the charging status of each battery independently.

The BAT.CHARGER 4 utilizes advanced charging technology to ensure fast and efficient charging. It can fully charge four batteries in just 4-5 hours. The charger also includes a float charging function, which helps to maintain the charge of fully charged batteries without overcharging them.

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • inf[email protected] DocID: 396242_10.12.2020
EN
Quick Start Guide
This quick start guide contains important information on the safe operation of the
product. Read and follow the safety advices and instructions given. Retain the quick
start guide for future reference. If you pass the product on to others please include
this quick start guide.
For the transport and protective packaging, environmentally friendly materials have
been chosen that can be supplied to normal recycling. Ensure that plastic bags, pack-
aging, etc. are properly disposed of. Do not just dispose of these materials with your
normal household waste, but make sure that they are collected for recycling. Please
follow the notes and markings on the packaging.
Batteries must not be disposed of as domestic waste or thrown into re. Dispose of
batteries according to national or local regulations regarding hazardous waste. Dispose
of empty batteries at appropriate collection sites.
This product is subject to the European Waste Electrical and Electronic Equipment Di-
rective (WEEE) in its currently valid version. Do not dispose of your old device with your
normal household waste. Dispose of this product through an approved waste disposal
rm or through your local waste facility. Comply with the rules and regulations that
apply in your country. If in doubt, consult your local waste disposal facility.
BAT.CHARGER 4
Safety instructions
Intended use
This device is used for simultaneous charging of up to four rechargeable batteries of
the Bat series or Makita BL 1013 (Thomann item no. 385488). Any other use or use
under other operating conditions is considered to be improper and may result in per-
sonal injury or property damage. No liability will be assumed for damages resulting
from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure
that children do not detach any small parts from the product. They could
swallow the pieces and choke! Never let children unattended use electrical
devices.
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device. Take batteries out of
the device if it is not going to be used for a longer period.
Where to use the product
Never use the product
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
General handling
• To prevent damage, never use force when handling the product.
• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not
use liquid cleaners such as benzene, thinners or ammable cleaning agents.
Using the device
1. If required, mount the device in a 19" rack.
2. Insert the plug of the mains power cable (6) into a properly wired power outlet.
3. Insert 1 to 4 Bat or Makita BL 1013 rechargeable batteries into the slots (1).
4. Set the on / o switch (3) to the ON position to turn on the unit.
5. During charging, the charging indicator of the respective charging slot lights
red. When the battery is fully charged, the charging indicator lights green.
6. When all batteries are charged, turn the On / O switch (3) to the OFF position
to turn o the unit.
7. Press the two buttons on the battery and remove it from the charging slot.
Operating elements

1. Charging slots 1-4 (batteries used for illustration only, not included)
2. Charging indicator
3. On / o switch
4. Rack mounting openings
5. Fuse
6. Mains power cable
Technical specications
Supply voltage 230V~50Hz
Charging voltage 9V
Float charging voltage 12.6V
Max. total charging current 2.5A
Duration for full charge 4-5 hours
Housing material Aluminium
Colour black
Fuse 5mm×20mm
3A, 250V, fast-acting
Dimensions (W×H×D) 480 mm×80 mm×67mm
Weight approx.1.4kg
  • Page 1 1

Varytec BAT.CHARGER 4 Battery Charger Quick start guide

Varytec
Brand
Varytec
Model
BAT.CHARGER 4 Battery Charger
Type
Quick start guide

Varytec BAT.CHARGER 4 Battery Charger

The Varytec BAT.CHARGER 4 Battery Charger is a high-quality device designed to charge up to four rechargeable batteries simultaneously. It is compatible with Bat series batteries and Makita BL 1013 batteries, making it a versatile option for a wide range of applications.

With its compact design and lightweight construction, the BAT.CHARGER 4 is easy to transport and store. It features four individual charging slots, each with its own charging indicator. This allows you to monitor the charging status of each battery independently.

The BAT.CHARGER 4 utilizes advanced charging technology to ensure fast and efficient charging. It can fully charge four batteries in just 4-5 hours. The charger also includes a float charging function, which helps to maintain the charge of fully charged batteries without overcharging them.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents