Emerson LC320EM2F Owner's manual

Brand: Emerson

Model: LC320EM2F

Type: Owner's manual

ENERSON ANDTHE GCLEF LOGO ARE REGISTEREDTRADENARKS

OF E'_IERSON RADIO CORR. P/\RS PBZ\NX NEW JERSEYUSA

32" LCD TV

LC320EM2F

EN Owner's Manual Need help? Please call toll free or visit our web site below

FR Manuel du Propri6taire Besoin d'aide? Appelez notre num6ro gratuit ou visitez notre site web _ I'adresse

ES Manual del Propietario zNecesita ayuda? Llame pot favor sin costo 6 visite nuestro sitio web en

t" 1-866-309-8819

ID www.emersonaudiovideo.com

MODEL NUMBER SERIAL NUMBER

WARNING: TO REDUCE THE RISKOF FIREOR ELECTRIC SHOCK, DO NOT EXPOSETHIS

APPARATUS TO RAIN OR MOISTURE.

APPARATUS SHALL NOT BE EXPOSEDTO DRIPPING OR SPLASHING AND NO OBJECTS

FILLEDWITH LIQUIDS, SUCH AS VASES,SHALL BE PLACED ON THE APPARATUS.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT RENOVE COVER (OR BACK}. NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

]-he lightn ng flash with arrowhead symbol, withn

an equilateral triangle, is intended to alert the

user to the presence of uninsulated "dangerous

voltage" withn the apparatus's enclosure that may

be of suflqc ent magntude to const tute a risk of

electrc shock to persons.

The exclamation point wrthn an equ lateral triangle s

intended to alert the user to the presence of mporSJrTL

operating and maintenance (servicing) instructions in

the I_erature accompanyng the apparatus.

The caut on mad<ink} is located on the rear or bottom of the cab net.

Important Safety Instructions

1. Read these instructions, 10. Protect the power cord fiom being walked on

2. Keep these instructions,

3. Heed all warnings,

4. Followallinstructions,

5. Do not use this apparatus near watel: 11.

6. Clean only with dry cloth,

7. Do not block any ventilation openings, Install in 12.

accordance with the manufacturer's instructions,

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat,

9. Do not defeat the safety purpose of the polarized

or grounding-type plug,A polarized plug has two 13.

blades with one wider than the othel: A grounding

type plug has two blades and a third grounding 14.

prong, The wide blade or the third prong are

provided for your safety,tfthe provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet,

or pinched particularly at plugs, convenience

receptacles, and the point where they exit fiom

the apparatus,

Only use attachments/accessories specified by

the manufacturer

Use only with the cart, stand,

tripod, brad<et, or table specified

by the manufacturec or sold with

the apparatus,When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury fiom tip-ovel:

Unplug this apparatus during lightning storms or

when unused for long periods of time,

Refer all servicing to qualified service personnel,

Servicing is required when the apparatus has been

damaged in any way, such as powepsupply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not

operate normally, or has been dropped,

Wall Mount Bracket Kit

Recommended Wall Mount Bracket Kit:

Bra_d: SanusVuepo nt Mode_ #: F55

Recommended Screw dimension when purchased:

H4x0.787" (2Omm) + Washer 0.078"(1 2ram}

• Jhe recommended Wall Mount Bracket Kit (sold separately)

allows the mounting oftheTV on the wall.

For detailed nformation on instal[ ng the wall mount, lefer to

the Wall Mount Instruction Book,

Funai is not respons ble for any damage to the product or njur!

to/ourself or others if you eject to nstall the ]V Wall Mount

Bracket or mount the[V onto the Bracket on your own.

• The Wall Mount Brscket must be nstalled by experts.

Funai not liable for these types of accidents or

injury noted below.

Install the Wall Mount Bracket on a sturdy vert cal wall,

If nstalled onto a celng or slanted wall,the[V and VVall

Mount Bracket may fall whch could lesult n a severe injur)4

Do not use screws that are Ionk]er or shorter than their

specified lengch. If screws too long ae used this may cause

mechan cal or electrical damage inside theqV set. If screws

too short ae used this may cause theiV set to fall.

Do not fasten the screws by excessive for_e; ths may damage

the product or cause the product to fall, lead nk_to an injur_

For safety leasons use 2_people to mount the]V onto a Wall

Mounting Bracket.

Do not mount the IV onto the Wall Mounting Bracket

whle youriV s plug._ed n or turned on. It may result n an

electr cal shock injur_

When installing the unit on the wall, allow this much space.

Top: 11.8 nches (30cm)

Left and right side: 5.9 nches (15cm)

Bottom: 3.9 nches (10cm)

FCC WARNING

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference

unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an

unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

:2) Increase the separation between the apparatus and receiver.

3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

DECLARATION OF CONFORHITY

Trade Name: Emerson Responsible Party: FUNA[ CORPORATION, Ine

Model: LC320EHlF Address: 19900 Van Ness Avenue. Torrance, CA 90501 US.A.

Telephone Number: 1-866-309-8819

This Class B digital apparatus complies with Canadian ICES-003. StandardTelevision ReceivingApparatus, Canada BETS.7/NTt4R.7

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

WARNING : Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

Disconnect the mains plug to shut off when find trouble or not in use.The mains plug shall remain readily operable.

This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.

Hake sure to leave a space of 4 inches (10cm) or more around this apparatus.

WARNING: To prevent injury, this apparatus must be securely attached to the wall in accordance with the instructions.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or

climbing on it. A falling unit can cause serious injury or even death.

_) LAHP IN LCD CONTAINS MERCURY, DISPOSEACCORDINGTO LOCAL, STATE OR FEDERAL LAW.

• The American Academy of Pediatrics discourages television

viewing for children younger than two years of age.

Trademark Information

NOTE ABOUT RECYCLING

• Ths unit's pdckaging maters am recyclable nd _ ................................

can be reused, Please dispose of any materia s r,

accordance with your Iota recyc ng i-egulat ons, HDMI, the HDMI Logo, and High Defin t on Nut media Ipte_ffsce are

Batter es shoud never be thrown away or incir_erated trademarks or i-eg stered traderr, ad<sof HDIVll Lcens ng LLC in the

but disposed of n accordance with your Iota United States and other countres,

regu ations concern ng chemical wages,

• For product recycling information, please visit

............... diovid ....... DOLBY

Y _ ¢"_' DIGITAL ]

WHEN CARRYINGTHIS UNIT _ _ f_

• At east 2 peope dre requ red wl,er_

carry ng this unit, blanuf_£tured under Icense fi-om Dolby Laborator es, Doby and the

• Hake sure to hold the upper and bottom double_D symbol am trademad<s of Doby Laboratories.

fi-ames of the unit firmy as ustrated,

TO AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

• Do not h rldlc' the AC power cord with wet I'ar'ds.

• Do not pu on the AC power cold when disconnect ng it flsm an

/kC outlet, Grasp it by the pug,

• Do not put your fingers or obiects into the unit,

LOCATION AND HANDLING

• Do riot nstall the unit n direct sur,light or it, a pace subject to dust

or strong vibl _tiorl,

• Avod a place wth drastic temperatuJe changes,

• Instal}the unit n horzontal and stable position. Do not pace sr,yth ng

direct y on top or bottom of the unit, Depend ng on your ext_,rnal

devices,noise or d sturbance o{the p cture and/or sound may be

gene/stu,d fthe unit is placed too close to them, Inthis case, pese

ensure enough space between the ext_,rna devces and the unit,

• Depend ng on the environment, the tempe/ature of this un t mdy

increase s ght y,This is not a md fur,or on.

• Be sure to unpug the AC power cord flora the AC outet before

moving or carry ng the unit,

ENERGY SlAP,'_ s a iont program of the U,S. Enw-onmental

Protection Agency and the U,S, Dep rtment of Energy helping us all

save money r,d D otect the envi_snment through energy eff'c ent

products and practices,

Consumer Notice:

ThsTV has been sc¢ to maximize energy efficiency while delivering

the best possibe picture using the factory natal ed home mode

sett ngs,

Changing or enabl ng other fl, atul es in thisTV (e.g. brightened

backlighting) w possibly increase energy consumpton beyond the

origina ENERGY S]AR _ qualfied mrs,

Congratulations on your purchase! As you enjoy your new product, please

keep these safety tips in mind:

THE ISSUE

• [he t-ometi_ealerenle a nr<-entexperence s a growh'g rend and large

flat panel displays are popular purchases However, flal panel displays

are not always suppored on the proper stonds or inslalled accord ng to the

manufacturer'srecommendalions

• Flatpanel displays thatare inappropriately stuated on dressers,bookcases,

shelves,desks, speakers,chestsor cartsmay fall over and causeinjury

THIS MANUFACTURERCARES!

• Tt'e consumerelectroncs induslry iscommitted to r,,aking homeenterta nn"ent

enjoyable and safe

TUNE INTO SAFETY

• One sze does NOT f all Follow the r_anufacturer'secommer_dations

for the safe rTstallotionar'd useof your flat panel display

• Carefully read ar,d ur,derstar,d all er,closed instructionsfor arooer useof

this product

• Don't allow children to clmb on or play with furnitJre and telev sionsets

• Don't place flat panel displays on turntare thatcan easily be usedas steps,

such as a chest of drawers

• Rememberthai children can become excited while watching a program,

especially on a "larger tha_"life" flal panel display Care shouldbe iaken to

place or install_hedisplay wf'e_e it cannol be pushed, pulled over,

or knockeddowr"

• Care should be taken to routeall cords and cables cant'eared to theflat

panel display so thatthey cannot be pulled or grabbed by curiouschildren

WALL MOUNTING: IFYOUDECIDETOWALLMOUNT

YOURFLATPANELDISPLAY,ALWAYS:

• Usea mountthat has been recommended by he display _anufacturer

and/or Ised by an ndepe_'dent laboratory (suchas UI, CSA, Erl)

• Follovvall inslructionssupplied by thedisplay and wall mount manufacturers

• If you haveany doubtsabou your ability 1osately installyour flal panel

d splay, contact your retailer about professonal installaton

• Make sure thatthe wall where you are mounting thedisplay s appropriate

Some wall mountsare nat designed to be mountedto walls with steel

studsor old cnder block construction If youare unsure,contact a

professional nstaller

• A '_qnimumof _o people are requi ed for ins_allaton Flal panel displays

can be heavy

www.CE.org/safety

INTRODUCTION Features

Contents

Important Safety Instructions

lrademark Information

Child Saf_,ty

INTRODUCTION

Featul es

Supplied Accessor es

Symbols Used in this Manual

Attaching the Base

Mounting the Unit on Your Furniture

Remote Control Function

Installing the Batter es

Contro Panel

l%rmina s

PREPARATION

Antenna Cor, nection I 0

Connectior, to Cable Receiver or Sate te Box I0

Plug In the AC Power Cord I0

Intal Setup 11

WATCHING TV

Swtching Each Input Mode I2

Sleep Nmer I2

Sound Functions I2

Freeze Node 13

TV Semen Disp _y Mode I3

Channel Select or1 13

TV Scroen Information I4

ECO I4

USING FUNCTIONS

Picture 16

Sound 16

Setup 17

Featul es 18

Language 23

USB 24

CONNECTING DEVICES

External Dr, vice Connect on 25

USEFULTIPS

_>,Q 28

5_oub eshoot r,g Guide 28

INFORMATION

Glossary 30

Maintenance 30

General Specifications 31

Electrical Specification 3I

Other Specifications 3I

Limited W_rranty 33

DTV/TV/CATV

You can use your remote contro to seect channels whch are

broadcast in d gitdl format and convent ona ar,aog format.Also,

cabe subscribers can access ther cable rv channels,

Information Display (ATSC only)

You can disp ay the tire, contents and other nbrmation of the

current DTV pl_gram on theTV sa een,

Autoprogram

This unt automadcal}y scans and memorzes channels avaiabe in

your area, e m nat ng d fficut setup pl_cedures.

Child Loci<

i¸i¸8

This Mature allows you to block ch Idren's access to inappropr ate i

progrdms,

Closed Caption Decoder

Built n cosed caption decoder disp ays text for closed caption

supported programs,

PITS / SAP Tuner

Audo can be selected fl-om the remote contro.

Auto Standby

If there s no input sgnl and no operat on for I5 minutes, the

unit wl go into standby mode automat ca }4

Sleep Timer

You can set the unt to go nto standby mode after a specific

amount of time,

Choices for On-screen Language

Select your on saeen nguage:

Eng sh, Span sh or French,

Stereo Sound Function

PLL Frequency Synthesized Tuning

Prov des flee and easy channe se ection and ets you tune

direct y to any channel usng the number and dec real point'%"

butt ....... tk, remot ...... fro,

Various Adjustment for Picture and Sound

Customi ...... ge quaty suitable for y............. d sets your

sound prefi, rence,

fun-Link via HDPII Link

(HDPII Cable not Included)

fun Lnk alows your other HDMI link dev ces to be contro ed by

the HDMI cable connected to yourTV.

HDMI Input

HDMI-DVI Input

If your vdeo devce hs DVI output jack, use an HDMI DVI

convers on cabe to connect the unt,

ComponentVideo Input

PC Input

AV Input

USB Terminal

The picture @PEG)and vdeo (Mot or1jPEG) files stored on a

USB storage devce can be payed back on this unit,

Digital Audio Output

All rghts reserved, No part of this manua may be reproduced, copied, transm fred, disseminated, transcribed, downloaded orstored in any storsg_

medium, n anyform or for any purpose without the express prior wr tt_,n consent of Funa, Furthermore, any unauthorized commorc dl disttibution of

ths manu or any revison he/eto s stricty plx)hibited.

Information in this document s subject to change without notice. Funai reserves the right to change the content heron w thout the obligat on to notfy

any person or organization of such changes,

_UNAI with the _'_ design s a registered tradem d< of Funs Eiectr c Co., Ltd, and may not be used in any way without the expl ess wr tten consent

of Funa, All other t_dem d<sused hel@n reman the exclusive property of ther respective owners, Noth ng contained n ths manua should be

construed as glint ng, by implication ol- otherw se, any cense or rght to use any of the trademarks displayed herein. Nisuse of any trademad<s or

any other content in this manua is strict y prohibited, Funai shall aggressive y enforce ts nte ectua property rights to the fullest extent o+the law.

Supplied Accessories

Owner's Manual Quick Start Guide Registration card

Remote Control

(NH001UD)

Batteries

(AAA, 1.SV x 2)

TV base and 3 screws (M4 x 14)

If you lose the screws, please purchase N4 x 14 Ph IIps head screws

at your Iota store,,

If you need to rep ace these accessor es, please refer to the part

name or No, with the lustlations and call our toll flee customer

support Ine foupd on the cover of this manual,

V_el sag a unve_sa _enoe coil _o o opelate d_s _s/:,

Nake sure the component code on your universa 1emote control

s set to our brand, Re@r to the mapua accompanying your

romote contro for more dora s.

We do not guarantee 100% nteroperability wth all universal

romote contro s,

Symbols Used in this Manual

The following s the descr ption for the symbols used n ths

manual. Description refers to:

:D gitallV operat on

:Analog/Cable rv operation

If neither symbol appears, the operation s applicable to

both.

Attaching the Base

You must attach the base to the unt to have it as a table top

unit, Be sure the front and rear of the base match the proper

direction, At least }_ people are requ red for these steps,

1 Check the text "FRONT" w_th "an ow" on the Base's

bosom to ensure t is being installed n the correct

direct on, Spread a thck and soft cloth over a table as shown

at step 2, Place the man unit face down onto it. Nake sure

not to damage the screen,

2 Insert 2 hooks under the

bottomofthemainunt _) .,. ,...

into base holes (shown by __ ....

arrow ,_)), then move the

base n the d rection as

shown by arrow (2)until

r_stops and the screw

holes are algned,

Make sure not to put the AC power cord between the

base and the unit.

Drve Ph Ilips head screws

into the 3 threaded holes

at the bottom of the base

until they are tght

[o _ , hove the base fort ds _r/t

• Unscrew the Phillips head screws in step 3,

After the screws are removed, pull the base up toward the rear of

the unit, Be ca1_'fu not to drop the base when you remove It,

Note

When attaching the base, ensure that all scl ews are tightly fastened,

If the base is not properly art ched, it could cause the unt to fal,

rr, sultin£ in injuries as well as damage to the unit,

Nake sure to use a tdble which can support the weight of this unit

and s larger than this unit,

Nal<e sure the table is in a stable location,

When attaching the base, ensure that"FRONT" wth "an-ow"

written on the bottom of the base is downwald, If it's not

downward, the _ hooks don't fit into the base,

Mounting the Unit onYour Furniture

Screw this unt on your furnture t ghtiy usng wood screw (not

supplied) in the hole at the back of the base as shown.

• Recommended screw dimens on :3/16 x 3/4 nches(5,1 x _0 ram)

rear of this unit

hole

Remote Control Function

I SOURCE ,,,,,_p.12

11 2 SLEEP ,,,,,_p.12

3 BACK ,,,,,_p,14

13 4 ilVl_lll_(cursor) Hill p.ll

5 MENU ,,,,,_p.15

6 OK ,,,,,_p.11

7 VOL /_/V IlIII_-p.12

8 MUTE D_ IlIII_p.12

9 Number buttons ,,,,_p.13

• (dot)

Press to shft the subchannel from the main channel

10 PREVCH IIIII_ p.13

Press to return to previously vewed channel.

11 (5 (power) IlIII_p.11

Press to turn the unit on and go into standby mode.

[o completely turn offthe unit, you must unplug the AC

power cord,

12 FORMAT IE_ iiili_ p.13

Pressto select aspect ratio available for theTV screen.

13 FREEZE IIIII_p.13

Pressto freeze screen image.

14 ECO J IlllI_" p.14

Pressto reduce power consumption,

15 INFO IlllI_- p.14

16 SAP IlIII_p.12

17 CH _l,/V IlllI_- p.13

::iiiil

!i_iii!

Zf_

{3'

i?i_i

, IC

Installing the Batteries

Install the batteries (AAA, 1.5V x 2) matching the polar ty

indicated inside battery compartment of the remote control.

ii,iiii!

_alsTery rec_t t el s:

Be sure to follow the correct polar ty as nd cared n the bal¢ery

compartmer,t. Reversed batter es may cause darna£e to the

device.

Do riot mix d f_,rent types of batteries to£ether (e,£. Akane arid

Carbor, Z no, or rechar£esble batteries like r,i cad, nml,, etc) or

od batteries with fi_esh ones,

If the devce is not to be used for long period of time, remove

the batter es to prevent damage or njury flsm poss hie battery

eak_£e.

Do not try to mchar£e batter es;the 7 can overheat and rupture.

Control Panel

1 VOLUME A/V ,,,_p.12

Press to adjust the volume up/down or move right

(A)/left (V) through the main menu tems,

2 CHANNEL A/V ,,,_p.13

Press to select channels or move up (A)/down (V)

thlough the main menu items.

3 MENU ,,w. p.15

4 SOURCE ,,W.p.12

5 _ POWER ,,W.p.11

Press to turn the unit on and go into standby mode.

[o completely turn offthe unit, you must unplug the AC

power cord.

6 Infrared sensor window

Receives inflated rays transmtted from the remote

controk

Standby indicator

Lights up red when the unt is n standby mode and

flashes when the unit goes nto s_Landby mode.

1 2 3 4 5

Terminals

Side Panel

8 USB Terminal

_,_ p.27 /

Use this term nal only to play back the p cture (JPEG) and

video (Notion ]PEG) flies stored on a USB storage device.

or when software update sneeded.

HDMI 2 Input jack _,W.p.10, 25 i

Component/Composite (VIDEO) Video Input jacks

for VtDEO _,w.p.26

CompositeV deo Input jack (VIDEO) s shared jack with

ComponentVideo Input (Y) jack.

AnalogAudio (UR)Input jacks

_,_ p.10, 25, 26,27

Connect Analog Audio sgnals from

ComponentVideo/Analog Audio (L/R)jacks sgnal or

HDNI DVI/Analog Audio (L/R) jacks signal or

CompositeV deo/Analog Audo (L/R) jacks sgnal or

PC Conned:on/Analog Audo (L!R) jacks signal wth

stereo toni plug conversion cable jack on PC.

AnalogAodo(L!R)inputjacksarerghtbelowthe

Component Video Input jacks.When the Audio is ' '

monaural.then only connect to the Audio L Input jack :

12 Antenna Input jack ll,_ p.10

Rear Panel

13 AC power cord _,. p.10

14 HDHI 1 (HDHI-DVI) Input jack

..... p.10,2s

15 Digital Audio Output jack ll,_ p.26

16 PC (VGA)Input jack ll,_ p.27

PREPARATION

Before you connect:

Be sure your antenna or other device s connected properly

before plu_ng In the AC bower cord.

Antenna Connection

Connect the Ri eoa×lal cable o _our home outlet to the

_R]_enna IRDU_ ark of this unit

VHF/UHF

analogor

DTV antenna

_,Fcoaxial cable

cable TV signal

Once connect ons are completed,turn on the unt and begin

nitial setup. Channel scann ng s necessary for the unit to

memorize all available channels n your area. [initial Setup]

_,! p.11

No(,

If you have any quest on about the ©TV's antenna, vsit

www.antennsweb.o% for further nformation.

Depending on your antenna system, you may need d fi_,rc,nt types

of comb nets (mixers) ol- separsJtors (sp tters) for HDTV signa

the rain mum RF bandpass or, these devces is 2,000bqHz ol- 2GHz,

For your safe'ty nd to dvod damage to this unt, please unpug the

RF coaxa cable flsm the antenna input jack before movng the

unit.

If you did use an antenna to rece ve ann ogTV, t should aso

wofl< for DTV mcept on, Outdoor or stt}c antennas w be more

eff_,ct ve than a sot top or inside antenna.

lb switch your mcept on source easily br,tween antenna and cabe,

nstall an antenna selectoE

If you a_c,not receiv ng a sgna flsm your cable serv re, contact the

Cabe prov de_:

Connection to Cable Receiver or

Satellite Box

Use an HDhql or ComponentV deo cables to connect the

HDMI or the ComponentV deo input jacks of the unit to the

HDPll or the ComponentV deo output jacks of the cable

race ver/satellite box.

if you connect to the unit's ComponentVideo input jacks,

connect Analog Audio cables to the Analog Audo L/R input

jacks right below the ComponentVideo connector jacks.

satellite dish

cab,oTV i na,

inc,u0ing V

.......................................................

................ ®

RF coaxial cabl_m

HDMI cable

_udio cables

cable receiver/satellite box

You can also connect this unit to the cable receiver or satellite

box other than the HDMI or the ComponentVideo output jacks

or CompositeV deo output jack (_,=, p.26) because they mght

have diffierent output jacks.

Requ red cables and connecting methods of the cable receiver/

sateUite box, or the ava lability channel for the dear QAM may

dffer depend ng on the cable/satellite prov der or IocaF[V

broadcas_Ler:

For more nformation, please contact your cable/satellite provider

or local TV broadcaste_

No°

• Use an HDPII cabe with the HDPll logo (a re/tiffed HDbql cable),

Hgh Speed HDMI cable s recommended br the better compsJtbi i%

Plug In theAC Power Cord

Nake sure that the AC power cord must be plugged to an AC

outlet after all the necessary connections are made.

C_ut o/:

Do not connect the AC power colx) to a powor suppy outs de

the nd catr'd vo}tage ofths unit (AC 120V).

Connect ng the AC power cord to a power suppy outs de of this

range md7 re,sut in fire or eectr ca shocks,

Note

Each time you pugn the AC power cold, no operations will be

pedormed for a f_,w seconds.This is not a malfunct on,

Initial Setup

This section wili guide you through the unit's nital setting

which ndudes selecting a language for your on screen menu

and autoprogram, which automat tally scans and memorizes

v ewabie channels.

Before you begin:

Hake sure the unt is connected to antenna or cable.

1 After making all the necessary connections,

press _ to turn on the unit,

• It may take a few moments to turn on the unt for the

first time,

• [Initial Setup] menu appears automatcall7 after the

unt is turned on,

2 Use &/V to select the on screen language from the

choices (Engl sh / Espa_ol/Franca s) on the rght sde of the

]V screen, then press OK.

3 Use A/V to select [Antenna] forIV channels or [Cable]

for C/_IV channels, then press OK.

Use <1/1_ to select the desired location setting, then press

OK.

[Home] is ENERGY STAR _ qualified sett ng.

Select [Retail] s_tore,the unit will be set up with

predefined setting for retail d splays. In this setting, the

power consumption may possibly exceed the limited

requ rement of the ENERGY g IAR ® qualification.

Select [Home], the unit s set to maxmze the energ 7

efl]c ency for home setting and t can be adjusted

through a choice of picture and sound quality accord ng

to your preference. Use this setting to remove the

E St cker f vis ble fiom the display ,,_ p.23

When the nitial setup is completed, the lowest

memorized channel with the confirmation message of

the Iocat on sett ng will be d splayed on the ]V screen.

You must set [Home] in step 4. Otherwise, [Picture]

(

!zi!

ii !i!i

and [Sound] settings you adjusted will not be

memorized after the unt goes into standby mode.

• [Autoprogram] will begn.

Noe

If you are, not receiv ng a sgnal fl_m your cable serv ce, contact

the Cabe prov de_:

If you Dess (_ or MENU durng autoplsgram, ths setup of TV

channels w be canceed.

The init al autoprogram function can be exr,cuted fur ether

[Antenna] or [Cable] ony once.When you change the

connect on (Antenn / Cab e), set [Autoprogram] agan. ,,_- p.17

If them is no signa input fi-om the antenn terminal and no

operat on for several seconds after you turn or, the unit. he pful

hints appears. Follow the instruct ons isted on theTV screen.

After an initial setup is completed...

• If you want to scan the channels automatically again.

[Autoprogram] nlmi.p.17

• You can add the desired cable and analog channels

unmemorized by autoprogram.

[Add Channels] ,,_ p.18

• If you want to change to another language.

[Language] n,_ p.23

• If you want to change the location setting.

[Location] n,_ p.23

WATCHING TV

Switching EachInput Mode .......................................

between FV ATSC or- NTSC ana ex_ema aev,ces wnen tne _re connec_ea to tile unit

Press SOURCE or CH • -eDepteq v TOcyce tnrougn the qDu_ moqe_

• Press n£_ CH _1' reverses the d rect on of the IrlDUT moaes,

[Component] wile be JlS[_"aved i÷vou connec[ea co- Donen[ vlaeo caole:

[o tnEs u/m

SleepTimer

wanSeTthe UrIT tC gO IntO stanac / mode after an Mcrementa E2rod of tree

Press SLEEP repeatea y to cnange the amount oft me qcreases

the time by 30 - nutes uo to 120 m nutes

Press SLEEP once to c_ up the disp ay for check n£ the rema nn£ time

• /o canoe seed t,me/: Dress SLEEP repeatedly unt [Sleep Off] !

s SDarea.

Sound Functions describe howto change the auaLo ortne aua_o Langua£ea_

/e as _ne vo ume

use VOL A/V to aa JS_tne voume

w De O SD Ryed for 8 _2w seconds when adjust ng the VOlUme

Press MUTE u_<to turn offthe

w r)e a SDaved for a few seconds,

• Press MUTE D2(a£a n or VOL A/V to recover trio on£ qal

voume

Press SAP repeatea y tc :yc e tnrougn tne ava able auao Jar Bua£es

• a _ aD e _an£ua£es differ aepeno ng on 1.he Droaac_st,

• [Other] is d SD_/eo when trio aUG o/arlgua£e canno_ De

acc!t _ea, or the acoc ca lan£uafes are other than En£ sn

Span sh or French

the ava_aDe auJ_o cnanr,

e,g,} cvnen a_ aua,o are ava_aDe

_ _ STEREO :Out F its stereo-aualo

SAP

, ,_ : _u_ b| ss secona aua o prog am

MONO Out,- its mono-aua c

iiiiiiiiiiiiiiiiiiiiiiii!_¸¸

iiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiii.....

Freeze Mode c_n treeze the mage shown on the] V screen for 5 m nutes,

Pro is FREEZE to freeze the Lmagc

• _ I](_ SOU[q(] OUTDU l- Wl [lOT De oauseo,

• Jc -_nce freeze mode Dress any DUWORSeXCeDt O

TV Screen Display Mode

5 trees of d soar modes can be se ecte J wnen ,ne DroaqcaST ]g S_Ton is sona ng _:9 or 4:3 v dee sgna,And 3 types of chsp a

Domes can be selected for PC inSUT S_na

Pro ssFORMAT _ _eDe_,ea v to switch theTV asDe_ rat c

For 16:9 videosignal

Normal 4:3

\Nide

For4:3 videosignal

Normal 16:9

Normal d sD avs a 16:9 D cture at its or _ qal size

Wide

ForPCinput signal

edges otthe screen.

Movie expand d spats a 16:9 Dc_ure ,naT s

erscal sTretched to fi the ! :tee" ] h s only crops

Movie expand out the'top of the r c_u 2

Zoom dJSDIR S 8 I 6:C_ D CLUr'e al_ TS max mum szc

w,r )u_ chang ng rs nonzonTa_ anq vel]lCa r-a_lo

Wide disolavs a nonzon,a v s,retched D cture, lh

cross out the left and right sdes of the p c,ure

Zoom

Movie exoand • .

the screen, n s C_ODS OU, The TeD OTthe D cture

Zoom

Normal o SPAYSa 4:3 D cture at ts org na_sze

5 debars aooear cq ooin eoges of the street

16;9 dlsp ays a 4:3 p c_ure a_ a 16:9 sLzc [ne OLC_k_e

s stretched her zonta v to fih the sc -eer

Movie expand d soars a 4:3 _c_ure at a I6:9 szc

Tne Dc_ure s s,r-e,cneq lore vet',ca v a, me TeD Of

Zoom dlso avs a 4:3 Dcture at _ I6:9 sze; a, I,s

maximum sz( _na__smore ver_ :a , stre_cnea _o

fi th : screen.] his crees out the too and bottom of

The D CZUFe

Wide disolavs zne 3c_urt m TScenter a_The

orl_ ha/s ze anti Tne e(ugess,re,cneo nor zonTa / ,c

n ,he screer

Normal d/sDavs a DrODOFTonaTev sTre_cneo

Dcture. Sdebar_ appear on oom cages of the screen

Normal Full

Unscaled dlsD[avs a D CLUre _ [s Org hal sze

Unscaled

Ch annel Selection

Seec_ cnanne s Dy USng CH •I _1' or the Number buttons

• lo seec_,ne _emorzea cnannes, use CH •IT orthe Number but:tons.

• /o seec_,ne non-memor zec manneD, L_e the Number buttons

To use the Number buttons

dVhen seEecrusgal£ltal channel •

Be sure _c Dress• b@ure enterir _£ne SUDcnanne_number:

Press PREV CH to return to the Drev ousv eweo cnanne

- VVhen selecting cam_eor analog .nanne

• ]No Signal ] v appear on the screen d_er _ne SuDcnapno DrOaCltdS__Soven

• [Audio only program] message w appodl on the]V screen, when you rece ve ony sound ssna,

TV Screen Information

You can d splaythe currently selected channel or other

nformation such as the audio mode on the TV screen.

in the digital mode, the detailed broadcast ng nformat on

for the current offthe air channel such as program ttle and

program guides are displayed.

1 PressINFO

1 2

ECO

You can turn on ECO Node to conserve powen

ECO mode: ON s ENERGY STTXR_'_qualified sett rig.

PressECOJ once to turn on ECO Node and reduce

power consumption.

PressECOJ again to turn offECO Node.

[ [,_ote

• You must set [Home] in [Location]. ,,,B p.23

Otherwise, the settings you djusted will not be sdved when the

unit goes into standby mode,

1 programttle

2 program guide

(Ihe program guide added to broadcasting

information is d splayed to a max mum of 4 lines.)

3 broadcast staton

4 channel number

5 audio language (/_JSC)/audo mode (N]SC)

[SwitchingAudio Node] u,ni, p.12

6 effective scanning lines and scan mode

7 TV format

8 program's image aspect ratio

9 CC (not avalabie if closed capt on is set to [Off])

10 chid Iockratng

2 PressINFO or BACK to hde the nformafion,

Note

When the program gude consists of more than 4 Ines, use •/•

to solo to the next/previous Ines,

[No description provided.] is displayed when the program gude

is not provided.

While the program gude is d splayed, the closed caption function

is interrupted,

In externa input mode, the follow ng semen is disp _yed;

e.g,)When an external devce s connected to Video Input jack,

The informat on d splay will automatica y disappear n I m nute.

USING FUNCTIONS

This section describes the overview of the man menu

displayed when you press MENU,

The main menu consists of the function setting items below.

1 PressMENU to d splay

the main menu,

Use A/T to select a desired menu and an _tem, then

press OK to determine the setting.

Page 16

Adjusting the p cture mode, or customize the

picture quality as your preference,

Page 16

Adjusting the sound mode, equalizer and some

other sound functions.

Page 17

Scann ng the channds available n your area and

see what the antenna levels are.

Page 18

Adjusting the Closed Caption, parental gude and

some other useful funct ons,

Page 23

You can choose English, Spanish, or [rench

as your on screen language.

Page 24

You can view p cture (jPEG) and video (Motion

jPE{}) files stored on a USB storage devce.

:2i

3 When the setting s completed, press MENU to exit.

Before you begin:

You must set [Home] n [Location]. ,,B p.23

Otherwise, the settings you adjusted will not be memorized

after the unit goes nto standby mode,

1 Use A/V to select the _tem you want to adjust, then press

OK.

Before you begin:

You must set [Home] n [Location]. ,,,*- p.23

Otherwise, the sett ngs you adjusted will not be memorized

after the unit goes nto standby mode.

1 Use A/V to select the item you want to adjust, then press

OK.

2 Adjustthe following items,

Smart Picture

Use A/• to select the des red sett ng, then press OK.

([Personal], [Standard], [Sports], [Movie], and [Game])

Brightness, Contrast, Color, Tint, Sharpness,

Color Temperature

You can only adjust the following opt ons when you set to

[Personal] in [Smart Picture].

Use A/• to select the des red sett ng, then press OK.Then

use _1/1_ to adjust the sett ng.

Cursor _1 Cursor •

Brightness to decredse brightness to ncredse brightness

Contrast to decredse contrast to ncredse contrast

Color to decrease coot to nclease coot

intensity ntensty

Tint to add red to add green

Sharpness to soften to shal-pen

Color

to ddd wdrm colors to add coo colors

Temperature

Noise Reduction

Reduces the nose of the picture.

Use A/• to select the desired option, then press OK,

t°n

Off

Note 1

• [hs function s d sabled when PC ir,put is seected, (Sett ng will be

in grdy.)

2 Adjust the f01iowing terns.

Smart Sound

Use A/• to select the desired setting, then press OK,

([Personal], [Standard], [Movie], [blusic], and [News])

Equalizer

Adjust tonal quality for each frequency.

Use _1/1_ to select the specific frequency and use &/• to

adjust the level, then press OK.

Virtual Surround Sound

V rtual surround sound gives you the stereophonic w_tual

space through your existing 2_channel stereo system.

Use A/• to select the desired opt on, then press OK.

Auto Votume Leveling

Ths function keeps a constant loudness d fferential between

theIV commerc als and the programs.

Use A/• to select the desired opt on, then press OK,

TV Speakers

Select the audio output from the unit's speakers, or not, 1[your

amplifier s HDbql link function compat ble and connected by

an HDbq cable to this unit, some sound operations such as

volume up can be changed by usng ths unit's remote control.

Make sure [fun-Link Control] is set to [On]. n,mi, p.22

Use A/• to select the desired option, then press OK.

On The sound wil be output fl_m the unt's speakers.

Off The sound wil not be output fi_om the unit's

speakers,

You can contro audio output flx_m your

Ext. Amp connected HDMI nk devices by usng this unt's

remote control.

Autoprogram

If you switch wires (e.g. between antenna and C/_l V) or f you

move the unit to a d fferent area after the nitial setting, or f

}/OU restore the D]V channeB you deleted, t s recommended

to use Autoprogram to perform a new channel search ....

1 Use A/V to select [Autoprogram],then press OK.

2 Use A/• to select an appropriate option, then press OK.

Primary MTS

You can set the output mode as a default for the sound mode

(NISC only).

This sett ng is not nterlocked when you change the output

mode by press ng SAR [Sound Functions] n,mi,p.12

Use A/• to select the desired option, then press OK.

Stereo Outputs stereo aud o.

Mono Outputs mono aud o,

SAP Outputs second audio progl_m.

Before you begin:

Make sure the unt is connected to antenna or cable.

1 Use A/v to select the _temyou want to adjust,then press

OK.

• When connected toVHF/UHF antenna, select [Antenna].

• When connected to C/X[V, select [Cable].

• [Autoprogram] will begin.

• When the scanning and memorzing are completed.the

lowest memorized channel will be d splayed.

Noe

After setting [Autoprogram], using CH A/T on the remote

contro sk}ps unsva}abe progl ms automatically.

If you are, not leceiv ng a sgnal fl_m your cable serv ce, contact

the Cabe prov de_:

If you pless _ or MENU durng autopl_gram, the sr,tup of TV

channels w be car,teed,

Even f [Autoprogram] s completed, the chsnne sr,lSin£ w be

ost free AC power co_d s unplu%ed br'_ure the unit goes nto

star'dby mode by press n£ 6,

The PIN code wll be mqumd once you set a PIN code n the

[Child Loci,:]. ,,_- p.20

If you want to change your PIN code, foow the nstruction of

[Change PIN]. ,,f, p.21

2 Adjustthe following items.

Channel List

The channels selected here can be skipped when selecting the

channels using CH A/Y,

[hose channels can s_LIIbe selected with the Number buttons.

1 Use A/V to select [Channel List],then press OK,

_- Use •/• to select the channel you want to remove, then

press OK.

Antenna Confirmation

[hs funct on lets you check the digital sgnal strength of each

channel.

1 Use •/• to selec± [Antenna], then press OK.

_- Use the Number buttons or CH •/• to select the

channel for which you want to check the digital signal

strength.

• 7he channel d splay for the removed channel darkens.

You will not be able to select the channel again usng

CH •/•.

• [b reactivate a removed channel, use •/• and press

OK[he reg stered channels are highl ghted.

• When you remove a main channel, its subchannels are

removed as wek

No_e

• The channe} with the [DTV] ind cated on the d splay is/_T%C.

Othewse the channe s NTSC.

• If the charlne is set to analog channel or external it,put, you

cannot confirm the antenna condt on.

Add Channels

[his function lets you add the offthe air along NISC or analog

Cable channels that were not added by the autoprogram due

to reception conditions at the intal setting.

1 Use •/• to select [Add Channels],then press OK.

_- Use the Number buttons to enter the number of the

channel you want to add, then press OK.

1 Use •/• to select the item you want to adjus_L,then press

OK.

_- Adius_Lthe following terns.

Closed Caption

You can view dosed captioning (CC) forTV programs,

movies and news. Closed caption refers to text of dialog or

descript ons displayed on screen.

Use A/• to select [Closed Caption], then press OK,

See the following descript on for sett ng each item.

1 Use A/• to select [Caption Service], then press OK.

2 Use A/• to select the desred dosed capt on, then press

OK.

Off Seect fyou do not want caption service.

The pr ma-y capt on and t_,xt services, _he

capt oning ort_,xt s displayed in the sine anguage

CC-1 and T-I asthe program's dialog (up to 4 Ines of script on the

[V screen, where _tdoes not obstruct reloval¢ parts

tithe picture).

Serve as the pref_,rred data channels.

CC-3 and T-3 The c@tion ng or text is often a secondary

language.

CC-2, CC-4, Raely _va lab e and brosdcasters use them orliy in

T-2 and T-4 specia condtions, such aswhen [CC-1] and [CC-3]

or [T-1] dnd [T-3] dre not _vdilab e.

• [here are 3 displa 7 modes accord ng to programs:

Paint-on Disp ays input chal_cters on the TV screen

mode immed ately.

Once ch ratters are stored n memory, they are

Pop-on mode dsplayed al at once.

Disp ays the cl,aracters cont nuous y by scro ng

Roll-up mode (max, 4 nes),

In addition to the basic closed caption, D]V has its own closed

caption called d gital capt on servce. Use ths menu to change

the sett ngs for d gital capt on servce.

1 Use A/• to select [Digital Caption Service], then press

OK.

2 Use A/• to selectthe desred dgtaJ caption service, then

press OK,

Select if you do not want digtaJ caption

Off

service.

Select one of these before changing any

CS-I to CS-6 other item n [Closed Caption] menu.

Choose [CS-1] under normaJ circumstances.

Note

• [Digital Caption Service] that you can swtch d ff_,rs depending on

the broadcast descr pt on.

You can change the caption style such as font, color or sze,

etc.

1 Use A/T to select [Caption Style], then press OK.

2 Use A/• to select [User Setting], then press OK.

3 Use A/• to select [On], then press OK.

Use A/• to select an item, then press OK. Then use

A/• to select the des red setting and press OK.

Picture display

::iiiil

{iq

(•}

Edge

(Edge Color and EdgeType)

Fo_t

_ack_round !_

(Background Color and Background Opacity or

Transparency)

• Revew your setting choce made below by looking in

Font

Background

Edge

the upper rght corner of the d splayed setting box (not

all selections show the differences selected).

Font Style

Font Size

-- Cosed capt on ng font stye, sze,

Font Color color and opacty can be changed.

Font

Opacity

Background

Color B ckground coor and opacity of the

Background dispayed caption can be switched.

Opacity

Edge Color Edge color and type of the dispayed

Edge Type caption can be switched.

No_e

Closed capt on will not be displayed when you are using an HDNI

connect on.

To show the closed caption on your 1V screen, broadcast signal

must contain the closed caption data,

Not allTV pro%ares and commercials hdve the closed caption or

alltypes of the closed caption,

Captions nd texts may not exactly match theTV voice,

Changing channels may delay the closed caption for a f_,w seconds.

Adiusting or muting the volume may delay the closed caption for

a f_,w seconds,

Abbreviations, symbols and other grammatical shortcuts md7 be

used in order to keep pace with the on screen action,This is not

a malfunction,

The caption or text characters will not be displayed while the

main menu ol-functions d splay is shown,

If a black box appears on theTV scleen, this means that the closed

caption is set to the text mode,]b teal-the box, seect [CC-1],

[CC-2], [CC-3], [CC-4] or [Off],

If the unt rece yes poor quilt 7 telev sion signa s,the capt ons may

contain en_rs, ol-there misht be no captions at all.Some possible

causes of poor quality signals am:

Automobile ignition noise

Electric motor noise

W_,ak signa reception

lult plex signa leception (ghosts or screen flutter)

Data dropout and Pix_,}ation (for DTV ony)

The unt itrains the cosed capt on setLng if the power MIs.

When the unit receives special effects psyb ck signal (e,g, Seal_h,

Sow nd St) fi_om aVCR's video output channe (oh3 or oh4),

the unit may not display the correct caption or text,

No_e

When you select a i_t% and set it to [Block], the hgher/_tngs

will be blocked automatca _The owor i_t ngs w be _vaiabe for

VlOW Ng,

When you set the highest rating to [View], all ratings turn to

[View] automat cal y,

1o block any in@proprate programs, set your mrs n [US Movie

Ratings Loci<I, [US TV Ratings Lock] and [Region Ratings Loci<I,

The chd lock sett ng will be _,tained after a power Mlule or after

the power s remow, d for }o%er thn 10 seconds (except the PIN

code reverts to 0000), [Child Lock] ,,,,Bp.20

If the ratng is b ocb, d, @ w appea£

[Region Ratings Lock] w be avaiable when the unit receives a

digital broadcast using the new isting system.

Fol- the Unted States, the unt may download the Region Ratings

Lock l_be, f requ rod,

The Canadian rating systems on this unit am based on CEA 766 A

and CR[C pocy,

Child Lock

Child lock reads the ratings for programs, then denies access

to the programs whch exceed the rating level you set.Wth

ths function, you can block certain programs nappropriate

for children and any channels or external input modes can be

nvisible.

1 Use &/T to select [Child Lock], then press OK,

Particular channels or external input modes can be invisible in

ths funct on.

1 Use &/¥ to select [Channel Loci<I, then press OK.

_- Use &/• to select the desired rating, then press OK

_epeatedly to switch between [View] and [Block],

2 Use the Number buttons to enter the 4dgt number's for

your PIN code.

$ [Component] wi} be dispbyed f you connected component

video cables to this unt,

• When you have not set up your PIN code,

enter 0, 0, 0, 0.

• When the PiN code is correct, [Child Lock] menu is

displayed.

See the following descr ption for setting each tern.

US Movie rat ngs lock is the ratng system created by MPAA.

Use &/• to select [US Movie Ratings Loci<I, then press

OK.

Use &/V to select the desired rating, then press OK

lepeatediy to swtch between [View] and [Block].

Page is loading ...

Emerson LC320EM2F Owner's manual

Emerson LC320EM2F Owner's manual

Emerson LC320EM2F Owner's manual

Related papers

Other documents