AccuBANKER Silver Installation guide

Category
Tablet cases
Type
Installation guide
1. Place the base pads on the bottom of the stand.
2. Remove the four screws.
Bottom
Base Pad
iPad Stand installation instructions
I. For video instructions.
Please scan the QR code using your phone.
II. For written instructions follow these steps.
3M
3M
3M
3M
3M
3M
3M
3M
3M
3M
3M
1X
4X
4X
2X
2X
Allen assembly tool
Single side adhesive
iPad protector bar
Right-angle Ligthtening cable
Cable holder
Double side adhesive
1X
(Use Single side adhesive or
Double side adhesive)
5. Place the Lightning cable holder to route the cord.
3. Place the iPad protector pads on the holder bars interior.
4. Route Lightning cable and place the metal holder bars back.
iPad
Protector Pad
iPad
Have any questions?
Please contact our customer support at:
Email: support@accubanker.com
Phone: 1-888-993-2228
Hours of Operation
Office Hours:
Monday through Friday
9:00AM to 5:00PM EST
  • Page 1 1
  • Page 2 2

AccuBANKER Silver Installation guide

Category
Tablet cases
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI