VESPA GTS 250 User manual

Vespa would like to thank you

for choosing one of its products. We have prepared this booklet to help you to get the very best from your scooter. Please read it carefully before riding

the scooter for the first time. It contains information, tips and precautions for using your scooter. It also describes features, details and devices to assure

you that you have made the right choice. We believe that if you follow our suggestions, you will soon get to know your new vehicle and it will serve you

well for a long time to come. This booklet forms an integral part of the scooter; should the scooter be sold, it must be transferred to the new owner.

Vespa GTS 250

Ed. 2

The instructions given in this booklet are intended to provide a clear, simple guide to using your scooter; details are also given of routine maintenance

procedures and regular checks that should be carried out on the vehicle at an Authorised PIAGGIO Dealer or Service Centre. The booklet also

contains instructions for simple repairs. Any operations not specifically described in this booklet require the use of special tools and/or particular technical

knowledge: to carry out these operations refer to any authorised PIAGGIO Dealer of Service Centre.

2

Personal safety

Failure to completely observe these instructions will result in serious risk of personal

injury.

Safeguarding the environment

Sections marked with this symbol indicate the correct use of the vehicle to prevent dam-

aging the environment.

Vehicle intactness

The incomplete or non-observance of these regulations leads to the risk of serious

damage to the vehicle and sometimes even the invalidity of the guarantee.

The signs that you see on this page are very important. They are used to highlight those

parts of the booklet that should be read with particular care. As you can see, each sign

consists of a different graphic symbol, making it quick and easy to locate the various

topics.

3

4

INDEX

VEHICLE...................................................................................... 7

Dashboard................................................................................ 8

Analogue instrument panel....................................................... 8

Clock......................................................................................... 10

Digital lcd display...................................................................... 10

Setting the total and trip odometers...................................... 11

Key switch................................................................................. 11

Locking the steering wheel.................................................... 11

Releasing the steering wheel................................................ 12

Switch direction indicators........................................................ 12

Horn button............................................................................... 13

Light switch............................................................................... 13

Start-up button.......................................................................... 14

Engine stop button.................................................................... 14

The immobilizer system............................................................ 14

Keys...................................................................................... 15

Immobilizerdevice enabled indicator led............................... 16

Operation............................................................................... 17

Programming the immobilizer system................................... 18

Accessing the fuel tank............................................................. 20

Opening the saddle............................................................... 21

Identification.............................................................................. 21

Rear top box opening................................................................ 22

USE.............................................................................................. 25

Checks...................................................................................... 26

Refuelling.................................................................................. 26

Tyre pressure............................................................................ 29

Shock absorbers adjustment.................................................... 30

Running in................................................................................. 31

Starting up the engine............................................................... 31

Precautions........................................................................... 32

Difficult start up......................................................................... 33

Stopping the engine.................................................................. 33

Stand......................................................................................... 34

Automatic transmission............................................................. 34

Safe driving............................................................................... 35

Rear rack.................................................................................. 37

MAINTENANCE........................................................................... 39

Engine oil level.......................................................................... 40

Engine oil level check............................................................ 40

Engine oil top-up................................................................... 40

Warning light (insufficient oil pressure)................................. 41

Engine oil change.................................................................. 41

Hub oil level.............................................................................. 43

Tyres......................................................................................... 45

Spark plug dismantlement........................................................ 46

Removing the air filter............................................................... 47

Cooling fluid level...................................................................... 48

Checking the brake oil level...................................................... 50

Battery....................................................................................... 51

Use of a new battery............................................................. 52

Long periods of inactivity.......................................................... 53

Fuses........................................................................................ 54

Front light group........................................................................ 59

Headlight adjustment............................................................. 61

Front direction indicators........................................................... 61

Rear optical unit........................................................................ 62

Rear turn indicators................................................................... 62

Rear-view mirrors...................................................................... 63

Front and rear disc brake.......................................................... 63

Puncture.................................................................................... 64

Periods of inactivity................................................................... 65

Cleaning the vehicle.................................................................. 65

TECHNICAL DATA...................................................................... 71

Kit equipment............................................................................ 76

SPARE PARTS AND ACCESSORIES........................................ 77

5

Warnings................................................................................... 78

PROGRAMMED MAINTENANCE............................................... 81

Scheduled maintenance table................................................... 82

6

Vespa GTS

250

Chap. 01

Vehicle

7

01_01

Dashboard (01_01)

A = Starter button

B = Engine block Run-Off switch

C = Throttle control

D = Front brake lever

E = Instrument panel

F = Rear brake control lever

G = Horn button

H = Turn indicator switch

I = Light switch

Analogue instrument panel (01_02)

A = Digital dashboard

B = Rhs turn signal indicator light

C = Headlights indicator light

D = Low-oil pressure warning light

E = High-beam indicator lighti

F = Low-fuel warning light

G = Speedometer

H = Lhs turn signal indicator light

I = Antitheft LED (immobilizer)

L = Engine management and injection diagnostics light

8

1 Vehicle

01_02

9

1 Vehicle

01_03

Clock (01_03)

Located on the instrument panel, it displays hours and minutes with 1 to 24 hour time.

Besides hours and minutes, month and day can also be displayed with the «T» button.

In order to adjust the above mentioned functions, operate button «U».

01_04

Digital lcd display (01_04)

A = Odometer

B = Coolant temperature gauge

C = Fuel level gauge

D = Tachometer

E = Digital clock

F = External temperature indicator

10

1 Vehicle

01_05

Setting the total and trip odometers (01_05)

The «TRIP» button displays the total and partial kilometres covered when pressed

repeatedly for less than 1 second. It resets the trip odometer when pushed more than

3 seconds. Push the «TRIP» button again to return to total odometer value.

01_06

Key switch (01_06)

LOCK = ignition disabled, extractable key, mechanical antitheft device enabled.

OFF = ignition disabled, extractable key, mechanical antitheft device disabled.

ON = Ready to ignition position, non-extractable key, mechanical antitheft device dis-

abled, lights on.

Locking the steering wheel

Turn the handlebar to the left (as far as it will go), turn the key to «LOCK» and remove

the key.

CAUTION

DO NOT TURN THE KEY TO «LOCK» OR «OFF» WHILE RIDING.

11

1 Vehicle

Releasing the steering wheel

Reinsert the key and turn it to «OFF».

CAUTION

DO NOT TURN THE KEY TO «LOCK» OR «OFF» WHILE RIDING.

01_07

Switch direction indicators (01_07)

Lever towards "S" = Left turn indicator is switched on;

Lever towards "D" = Right turn indicator is switched on;

The lever returns automatically to position "0" and the turn indicator "B" remains on;

press the lever to turn them off.

12

1 Vehicle

01_08

Horn button (01_08)

Push the «C» button to sound the horn.

01_09

Light switch (01_09)

0 = Low beam and side light

1 = High beam and side light

13

1 Vehicle

01_10

Start-up button (01_10)

Starter button "G"

01_11

Engine stop button (01_11)

0 = OFF

1 = RUN

The immobilizer system

In order to enhance theft protection, the scooter is equipped with a «PIAGGIO IM-

MOBILIZER » electronic engine locking device that is activated automatically when

the starter key is removed. Upon start-up, the «PIAGGIO IMMOBILIZER» system

checks the starter key, and only if this key is recognised will the immobilizer system

allow the scooter to be started.

14

1 Vehicle

01_12

01_13

01_14

Keys (01_12, 01_13, 01_14)

Two types of keys come with the vehicle.

The red-handgrip key "A" is the "MASTER" key.

Only a single copy of this key is supplied, which is necessary to program all your other

keys and for your dealer to perform some maintenance operations. For this reason it

is advised that it be used only in exceptional circumstances.

The blue key «B» (single copy supplied) is used for normal operations such as:

- engine start up

- glove-box opening

Together with the two keys, you will be given a CODE CARD bearing the same code

imprinted onto the two keys.

WARNING

LOSING THE RED KEY PREVENTS ANY REPAIRS OF THE 'PIAGGIO IMMOBIL-

IZER' SYSTEM AND THE ENGINE CONTROL UNIT.

WARNING

KEEP THE 'CODE CARD' AND THE RED HANDGRIP KEY IN A SAFE PLACE (NOT

ON YOUR VEHICLE).

15

1 Vehicle

Immobilizerdevice enabled indicator led (01_15)

The operation of the «PIAGGIO IMMOBILIZER» system is signalled by a blinking

indicator light, «I» (see the «Analogue dashboard» section).

To prevent the battery from discharging, the indicator led automatically shuts down

after 48 hours of uninterrupted operation.

In the event of a malfunction to the system, the indicator led provides diagnostic in-

formation to your Authorised Piaggio Service Centre through its blinking patterns.

16

1 Vehicle

01_15

Operation

Every time the starter key is removed in the "OFF" or "LOCK" position, the safety

system activates the immobilizer system. Turning the key to "ON" disables the engine

lock, provided that the safety system recognises the code transmitted by the key. If

the code is not recognised, turn the key first to "OFF" and then to "ON"; if the lock

cannot be disabled, try with the other key supplied (red-coloured). If the engine cannot

17

1 Vehicle

be started, contact an Authorised Piaggio Service Centre, which is provided with

the electronic equipment required to detect and repair the system.

When additional keys are required, please note that data storage (up to 7 keys max.)

must be done on all keys, both new ones and existing ones.

Take your scooter to an Authorised Piaggio Service Centre carrying with you the

red-handgrip key and all the blue keys in your possession.

The codes of keys not submitted for the new storage procedure are deleted from the

memory. Any lost keys will therefore not be enabled to start the engine.

WARNING

EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED BY

THE SYSTEM CONTROL UNIT.

VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE

KEY.

IF OWNERSHIP OF THE VEHICLE IS TRANSFERRED, THE RED-HANDGRIP KEY

(AS WELL AS THE OTHER KEYS) AND THE "CODE CARD" MUST ALSO BE

TRANSFERRED TO THE NEW OWNER.

Programming the immobilizer system

Below is described the procedure to follow for programming the PIAGGIO IMMOBIL-

IZER system and/or for storing other key codes. The programming procedure should

be carried out with the engine stop switch set to «RUN».

Procedure start - red key

Insert the red-handgrip key in the switch key (in "OFF" position) and turn it to "ON".

After 1 - 3 seconds, turn the key to "OFF" again and pull it out.

18

1 Vehicle

Intermediate step - blu key

Within ten seconds after pulling out the red key, insert the black key and promptly turn

it to «ON». After 1-3 seconds, turn the key to "OFF" again and pull it out.

In this way, a maximum of 3 blue keys can be programmed by repeating the above

procedure and keeping the indicated times.

Final step - red key

After pulling out the last blue key, insert the red key again and turn it to "ON" (this

operation should be performed within 10 seconds of pulling out the previous key).

Leave it in this position for 1 to 3 seconds and return it to the «OFF» position.

Proper programming check

Insert the red key disabling the transponder (i.e., tilt the key cap by 90°) and turn the

key to "ON". Perform the engine start-up operation. Ensure that the engine does not

start. Insert the blue key and repeat the start-up operation. Check that engine starts.

WARNING

SHOULD THE ENGINE START WITH THE RED KEY (WITH TRANSPONDER OFF),

OR IN THE EVENT OF WRONG OPERATION DURING PROGRAMMING, REPEAT

THE PROCEDURE FROM THE BEGINNING.

19

1 Vehicle

01_16

01_17

01_18

Accessing the fuel tank (01_16, 01_17, 01_18)

With the key set to «OFF» or «ON», or with engine on, it is possible to electrically open

the saddle by pressing the button «C». If the saddle opening system does not work,

operate the emergency lever «A». Then, unscrew cap «B» and the fuel tank can be

reached.

20

1 Vehicle

Page is loading ...

VESPA GTS 250 User manual

This manual is also suitable for

VESPA GTS 250 User manual

Related papers

Other documents