Lenoxx BCR663 Instructions Manual

Brand: Lenoxx

Model: BCR663

Category: Alarm clocks

Type: Instructions Manual

This manual is also suitable for

MODEL: BCR664

BATCH NO: PR3659

PLEASE READ & RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

SAFETY INFORMATION AND WARNINGS:

* Do not press two or more keys at the same time.

* To avoid failure, the interval of every touch must be more than 1 second.

* If there is any malfunction, please unplug the unit for 3 seconds.

* If the batteries are not used for a long time, please remove.

* When the batteries voltage becomes low, the product will get restart and all settings will be lost.

Please replace with new batteries.

* The adaptor is designed to be used with this product only, please do not use the adaptor to charge

other devices such as a Mobile Phones.

* If the USB lead or power adaptor have become damage, please do not use the USB lead or power

adaptor.

* The unit does not have an ON/OFF switch. To disconnect the unit from its power source, remove

the plug from the wall outlet and/or remove the batteries if added.

1. This unit is for indoor use only.

2. Do not expose the unit to dripping or splashing.

3. Do not place any object filled with liquids, such as vases, on the unit.

4. The mains plug of the unit should not be obstructed OR should be easily accessed during

intended use.

5. Do not expose batteries to excessive heat such as sunshine, fire or the like.

6. Ensure there is 10cm distance around the unit for sufficient ventilations.

7. The ventilation should not be impeded by covering the ventilation openings with items such as

newspaper, table-cloths, curtains etc.

8. No naked flame sources such as lighted candles should be placed on the unit.

9. Store in a cool, dry place with the batteries removed if the unit will not be used for a long time.

FUNCTIONS:

• LED time display in 12-hour or 24-hour format

• White light and colour light

• Sunrise simulation wake-up light

• Sunset simulation sleep light

• 10 levels of light brightness

• Automatic mood light colour changing

• Choose a coloured mood light from 6 different colours

• Dimmable time display: high, low or off

• 6 x pre-set wake up sounds

• Wake by FM radio

• FM radio with antenna lead

• Bluetooth

• AUX function

• Power supply: DC 5V or 3 x AAA batteries (not included)

Use batteries as a backup power source. ln case of electricity failure this will be used to save the

settings.

When the product is running on batteries, the Function are abilities limited:

-Time display will be switched off after 10 seconds. Press any key to switch on time display.

-Alarm function is available; the display will be switched off after 10 seconds.

- Radio is available.

- Bluetooth and aux in playback are not available.

-All light functions are unavailable in battery mode

Battery installation:

Require 3 AAA Batteries (not included)

- Open the battery compartment

- Insert 3 AAA batteries.

- Observe the polarity.

- Close the battery compartment.

To power on, connect the

USB cable to the adapter

and product. Plug the adapter

to a power socket.

OVERVIEW:

OPERATION:

1. Place the Wake-up Light 40-50 cm from your head, for example on a bedside table.

2. Connect with DC 5V power, after 1 second the unit will enter the clock setting mode.

SETTING THE CLOCK TIME:

1. You must set the clock time when you plug in the appliance for the first time and when there

has been a power failure.

2. The hour on the time display will blink. You can adjust hour by touching the

buttons.

3. Touch the button to confirm the hour. Setting will be cancelled if no action in 5

seconds.

4. The minutes on the time display will blink. You can adjust hour by touching the

buttons.

5. Touch the button to confirm the minutes. Setting will be cancelled if no action in 5

seconds.

6. Choose between a 12-hour and a 24-hour time display by pressing the button which

is on the rear of the unit.

When the 12-hour time format is selected, AM or PM will be displayed.

7. Press the button on the rear of the unit to adjust the intensity of time display: Low -

High - Off.

8. When powered by 3xAAA batteries, time display will automatically disappear in 5 seconds,

you can press any of the buttons to show the time display.

LIGHT:

1. First touch the button to switch on white light and use it as a bedside lamp. You can

adjust the white light intensity by touching the buttons , there are 10 different

levels of brightness.

2. Touch the button a second time to enter into automatically colour changing mode

and use it as a mood light. You can touch the buttons repeatedly to choose to

display a single colour light. The light colour options are green, red, blue, pink, orange and

aqua.

3. Third touch button to switch off the light.

SETTING THE ALARM/WAKE UP TIME:

1. Touch the button if you want to switch the alarm on or off. The alarm symbol

appears on the time display when you switch on the alarm. It disappears when you switch

off the alarm.

2. Long touch the button for 3 seconds to set the alarm, the hour indication will start to

blink and you can adjust the hour of alarm time by pressing the buttons. Setting

will be cancelled if nothing is pressed within 5 seconds.

3. Touch the button. The minute indication will start to blink, and you can adjust the

minutes of alarm time by pressing the buttons.

Setting will be cancelled if no action in 5 seconds.

4. Touch the button to save the alarm time.

5. Press the button on the rear of the unit, then touch the buttons on the

front of the unit to choose between 1 and 7 as a wake-up sound. 1-6 are pre-set natural

sounds and 7 is FM radio). If switching between 1 and 6 as a new alarm sound, a preview of

that sound will be played for 10 seconds. Switching to number 7, no sound will be played

and your last listened to FM station will be the wake-up sound.

Press the button again to confirm the wake-up sound. The setting will be cancelled if

there is no action in 5 seconds.

6. You can choose a volume level (for the wake-up sound) between 00 and 15 (default is 10) by

pressing the button on the rear of the unit repeatedly to increase the volume level to

your chosen level. There is no volume decrease button.

SUNRISE SIMULATION WAKE UP LIGHT/ ALARM/ SNOOZE:

30 minutes before alarm time, the sunrise simulation white light will come on and the light will

gradually increase in intensity to the alarm time.

At alarm time, the wake-up sound will play for 2 minutes.

While the wake-up sound playing, touch the button to enter snooze mode. The wake-

up sound will play again after 5 minutes and last for 2 minutes.

Touch/Press any button except for the button to stop the wake-up sound.

During wake-up light period, you can switch off the wake-up light by long touching the

button for 3 seconds.

SETTING THE SUNSET/SLEEP TIME:

1. Touch the button to switch sunset on or off. The sunset symbol

appears on the display when you switch on, it disappears when you switch off.

2. Long touch the button to set the alarm, the hour indication starts to blink.

You can adjust the hour by touching the buttons.

Press the button again and the minute indication will start to blink.

You can adjust the minutes by touching the buttons.

3. Touch the button again to confirm the sunset time.

Setting will be cancelled if nothing is pressed within 5 seconds.

SUNSET SIMULATION SLEEP LIGHT:

1. 30 minutes before sunset time, the sunset simulation white light will be on at 100% intensity

whatever at any mode, and then it will become lower and lower intensity until turn off at

sunset time.

2. During sunset light period, you can switch off sunset light by long touching the

button for 3 seconds.

FM RADIO/BLUETOOTH/AUX IN:

1. Touch "FM button" repeatedly to change the modes between FM radio, Bluetooth Speaker,

AUX, or OFF.

2. On FM radio mode, long touch the "FM" button for 3 seconds to scan radio frequencies

automatically. The scanned frequencies will be saved automatically. The saved radio stations

can not manually be pre-set into different positions.

3. Touch the buttons choose between the saved radio stations.

4. Tip: To get a good radio signal, fully unwind antenna and move it around until you receive

the best reception.

5. On Bluetooth Speaker mode, the unit will say “enter the Bluetooth”.

Then, pair this unit with a Bluetooth device to play music.

In the Bluetooth settings on the device, search for the unit’s name BCR664 and then pair

them.

When connection has been made successfully, the unit will say “connection successful”.

Music can then be played from your Bluetooth device into the unit.

6. On AUX mode, to connect this unit with a device via AUX cable (not included) for music

playback.

7. Press the button on the rear of the unit repeatedly to increase the volume level to

your chosen level. There is no volume decrease button.

Lenoxx BCR663 Instructions Manual

Brand: Lenoxx

Model: BCR663

Category: Alarm clocks

Type: Instructions Manual

This manual is also suitable for

Download PDF

report

Lenoxx BCR663 Instructions Manual

This manual is also suitable for

Lenoxx BCR663 Instructions Manual

Other documents