TEAC CRX-230 is a multi-functional device that combines a CD player, radio, and alarm clock, providing versatile entertainment and timekeeping options. It offers:
-
CD Playback: Enjoy your favorite music CDs with clear and immersive audio quality.
-
Radio Reception: Tune into AM and FM radio stations to listen to news, music, or talk shows.
-
Alarm Function: Wake up to your preferred CD track, radio station, or buzzer sound. It also features a snooze function for those who need a few extra minutes of sleep.
-
Auxiliary Input: Connect external audio devices, such as smartphones or MP3 players, through the auxiliary input jack to expand your music choices.
TEAC CRX-230 is a multi-functional device that combines a CD player, radio, and alarm clock, providing versatile entertainment and timekeeping options. It offers:
-
CD Playback: Enjoy your favorite music CDs with clear and immersive audio quality.
-
Radio Reception: Tune into AM and FM radio stations to listen to news, music, or talk shows.
-
Alarm Function: Wake up to your preferred CD track, radio station, or buzzer sound. It also features a snooze function for those who need a few extra minutes of sleep.
-
Auxiliary Input: Connect external audio devices, such as smartphones or MP3 players, through the auxiliary input jack to expand your music choices.
GB-1
WARNINGS
To reduce the risk of fire or electric shock, do not expose
This appliance to rain or moisture.
EXPLANATION OF GRAPHIC SYMBOLS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
vaintenance ( servicing) instruction in the
lliterature accompanying the appliance.
The lightning flash with arrowhead symbol, with in
an equilateral triangle, is intended to alert user to
the presence of uninsulated “ dangerous voltage”
within the product enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
HAZARD WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CLASS 1 LASER PRODUCT
CAUTION
INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCK FAILED OR
DEFEATED. AVOID DIRECT EXPOSURE TO
LASER BEAM
This product contains a low-power laser emitter.
PRECAUTIONS FOR USE
To ensure safe, appropriate use of your personal CD player,
please follow the advice below:
Location
Condensation
• Water droplets or condensation may form inside the
CD player if it is left in a warm, damp atmosphere.
• The product may not operate correctly if
condensation forms inside it.
• Do not use the product in extremely hot, cold, dusty or
damp conditions.
• Leave the product in a warm, dry room for 1 to 2
hours to allow the condensation to evaporate.
• Place the product on a smooth, flat surface.
• Ensure that air is free to circulate through the
product. Do not use it in a poorly ventilated place,
cover it with a cloth or place it on carpet.
In the event of a problem, unplug the power cord and
contact a qualified repair technician.
Power supply voltage
• Before using the product, check that its rated
voltage is suitable for your mains supply.
Warning: Ventilation
Your personal CD player has ventilation holes, which
should never be obstructed.
Safety precautions
• When you plug in or unplug the power cord, always
hold the plug rather than the cable. Pulling the cord
could damage it and create a hazard.
Liquid warning :
Never allow liquids to splash or drip onto the product.
Never place a liquid-filled container (e.g. vase, jar, etc.)
above it.
• Always unplug the product from the mains if you do
not intend to use it for an extended period.
• The On/Off button does not disconnect the product
from the mains power supply. To disconnect the
product from the power supply, you must unplug the
power cord.
• This product should only be used in a horizontal
position.
• “The apparatus shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed
on apparatus”
• “ The mains plug is used as the disconnect device and it shall
remain readily operable. To be completely disconnect the power
input, the mains plug of apparatus shall be disconnected from
the mains.”
• The apparatus will be use in open area
• the ventilation should not be impedde by covering the ventilation
openings with items such as newspaper, table-cloths, curtains etc
• no naked flame sources such as lighted candles should be placed
on the apparatus;
• attention should be drawn to the environmental aspects of battory
disposal;
• the use of apparatus in moderate climates.
CD RADIO ALARM CLOCK
Power connection
1. Plug the AC 240V Power Cord into an AC
household outlet.
2. If you want battery back up, insert one
alkaline 9V battery (not included) into the
battery compartment on the underside of the unit.
3. The batteries will remember the time during a power cut, but not display it.
4. Normal display and function will resume
when power is restored, replace the batteries annually.
5.
NOTE: No battery is needed for normal operation.
The mains plug is used as the disconnect device and it shall remain readily operable.
Switching the unit off does not disconnect it from the mains.To be completely disconnected,
To be completely disconnected, the mains plug of apparatus shall be removed from the mains.
As the disconnect device is the mains plug.
When the display gives no color, the apparatus is completely disconnected from
mains. NOTE:No battery is needed for normal operation.
6.
POWER SOURCES
PLAYER MAINTENANCE
Cleaning the Cabinet
IMPORTANT: Disconnect from Main Supply Before
cleaning.wipe with a soft cloth. If the cabinet is very
dirty, dampen the cloth with a weak solution of neutral
detergent and water, and then wipe clean.
Cleaning the Lens
A dirty lens may cause the sound to skip and, If the
lens is very dirty, the CD may not work. Open the
disc cover and clean the lens as follow:
Dry Dust Particles
Using a camera lens brush/blower, blow on the
lens couple times, then wipe it lightly with
the brush to remove dust. Then, blow on the lens
once more.
Finger prints
If the lens cannot be cleaned by using a brush/
blower use a dry cotton swab.
GB-2
DISC CLEANING, POWER FAILURE
Cleaning the Disc
1.To handle a disc use only one of the two
manners.
Note: Do not touch the rainbow colored side.
2.To wipe a disc, use only a soft cloth. Do not
use benzene or thinner which will damage the
disc, the disc should always be wiped in a
straight line from the centre to the edge. It
should never be wiped in a circular motion.
3. Never place the disc on other equipment or
near any heat source. Avoid positions where
the disc would be subjected to direct sunlight
for long periods.
Power failure
When AC power is interrupted, both time
and alarm settings will be lost (unless 1 x
6F22 battery (not supplied) is installed)
after power is restored. The digital display
will blink to show power was interrupted.
You must reset time and alarm times.
Battery back up
To keep alarm and time of day settings in
memory during a brief power failure or
accidental removal of AC cord from mains
socket, install 1 x 6F22 battery (not
supplied) into the battery compartment
on the underside of the unit.
Maintenance and care
Electronic products should never be
subjected to extreme temperatures nor
high humidity to ensure good performance
and a long life-time.the clock radio should
not be placed in bathing areas, or around
stoves and radiators, etc.always leave
sufficient space around the unit for
ventilation.
2. If necessary, only clean the cabinet of
the unit with a soft dampened piece of
cloth, (be sure the AC power cord is
unplugged from the outlet).never use a
polish or a strong detergent for cleaning
since this can damage the finish of the
cabinet.
3. If the electric cable is damaged, it must
be replaced by the manufacturer, or by
the qualification persons, in order to
avoid a danger
GB-3
LOCATION OF CONTROLS
Function of controls
1. MINUTE button
2. HOUR button
3. ALARM button
4. VOLUME control
5. Stereo Headphone Jack
6. SNOOZE button
7. CD door
8. OPEN button
9. TIME button
10. FUNCTION (CD/AM/FM/BUZZER) switch
11. Dial Scale
12. TUNING control
14. PROGRAM button
15. REPEAT button
16. SLEEP button
17. CD display
A. PLAY indicator
18. CLOCK display
B. REPEAT indicator
C. SLEEP indicator
D. PROGRAM indicator
E. ALARM indicator
13. ON/OFF button
GB-4
SETTING THE CLOCK/TIME
LISTENING TO THE RADIO
Aerials
CD PLAYING
. Connect the AC power cord to a wall outlet.
. 0:00 will show on the display and begin to flash.
1. Hold down TIME button and press HOUR button to set the hour.
2. Hold down TIME button and press MINUTE button to set the minute.
1. Slide the function (CD/AM/FM/BUZZER) switch to AM or FM position ,Press the
ON/OFF button, Tune into a station using the TUNING CONTROL.
2. Adjust the VOLUME control to the desired level.
FM: Extend the FM aerial wire to improve FM reception.
AM: Turn the unit for better AM reception.
1. Open the disc compartment.
2. Place a disc in the centre with the label side facing up and close the
disc compartment.
3. Slide the function (CD/AM/FM/BUZZER) switch to CD, press the ON/OFF button.
4. The play indicator will light and play will automatically begin at track 1.
Notes:
1. In the STOP mode, To open the CD door ("OP"will be displayed) and insert
another disc with the printed side facing up gently close the door.
2. The display will indicate the total number of tracks on the disc.
3. Press PLAY/PAUSE button
• Playback starts from the first track.
For CD-R/ CD-RW users: Depending on the type of CD burner, the disc brand and
the burning speed, some reading problems may occur.
BASIC OPERATION
TO stop Playback Press STOP button
To pause Playback Press PLAY/PAUSE button, To resume
playback, press it again
To search for the beginning of a track Press I<< or >>I button briefly
To locate a desired passage Keep I<< or >>I pressed.
Release the button at the start of the
desired passage.
GB-5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
F.ON/OFF indicator
19. PLAY/PAUSE button
20. SKIP I<< button
21. SKIP >>I button
22. STOP button
23. Speaker
24. Battery Compartment
25. AC mains
26. ALARM ON/OFF switch
25
A
B
C
D
E
24
26
GB-6 GB
-7
REPEAT mode
SNOOZE
PRODUCT SPECIFICATIONS
Press the REPEAT button before or during play. A single track or all tracks can repeat.
Each press changes the repeat mode as follows:
1 REPEAT 2 REPEAT ALL 3 REPEAT OFF
(Repeat indicator will flash) (Repeat indicator will remain on) (Repeat indicator will turn off)
PROGRAMMED DISC PLAY
TO SET THE ALARM AND SET WAKE TO CD/RADIO BUZZER
Up to 32 tracks can be programmed to play in a specific order by following these steps.
1. Set the CD/AM/FM/BUZZER switch to CD.
2. Press the PROGRAM button.
3. Press the I<< or >>I button to select the track number.
4. Press the PROGRAM button when the desired track number is displayed.
5. Repeat step 3 and 4 to program more tracks.
6. Press the PLAY/PAUSE button to start programmed playback.
To check the program
• Press the PROGRAM button during stop mode. The track numbers are displayed in
programmed order.
To erase the program
• Press the PROGRAM button and then the STOP button when the CD is stopped
Opening the disc compartment will also erase the contents of program memory.
The radio, buzzer or CD automatically sounds at the designated time every day.
1. Ensure alarrm switch on under side of unit is set to on. Press and hold ALARM button.
2. While holding down ALARM, use MINUTE and HOUR button to set the time to
come on.
3. The alarm indicator will always light up when alarm switch is set to on.
4. Slide the function select switch to CD, AM, FM, or Buzzer position, and adjust the
volume
5. To cancel the ALARM wake up, press the ALARM button.
• The alarm can be temporarily turned off by pressing the SNOOZE button; the alarm will
turn back on automatically 9 minutes later.
• Tune the desired radio station or insert a CD as previously instructed.
1. While in standby press the SLEEP button, the unit will turn on and the SLEEP
indicator will appear in the clock display.
2. Press and hold down the SLEEP button, use the MINUTE button to set the desired
sleep time.
3. TO cancel sleep time, press the SNOOZE or ON/OFF button again.
RADIO
GENERAL
Receiving bands
Frequency range
AM/FM
AM 531 - 1602kHz
FM 87.5 - 108 MHz
Power requirements
Power consumption
Power Output
Dimension
Weight
240V ~ 50Hz
DC 9 V (1 X 6F22)battery for clock backup only
12W
0.8W X 2 RMS
230(W)mm X 84(H)mm x 158(D)mm
1.17kg(not including battery)
TO ACTIVATE THE SLEEP FUNCTION(OMY UMT IS IN OFF MODE)
TO ACTIVATE THE SLEEP FUNCTION(ONLY UNIT IS IN STANDBY MODE)
4. The unit will turn off after the selected time has expired.
-
1
-
2
-
3
-
4
-
5
TEAC CRX-230 is a multi-functional device that combines a CD player, radio, and alarm clock, providing versatile entertainment and timekeeping options. It offers:
-
CD Playback: Enjoy your favorite music CDs with clear and immersive audio quality.
-
Radio Reception: Tune into AM and FM radio stations to listen to news, music, or talk shows.
-
Alarm Function: Wake up to your preferred CD track, radio station, or buzzer sound. It also features a snooze function for those who need a few extra minutes of sleep.
-
Auxiliary Input: Connect external audio devices, such as smartphones or MP3 players, through the auxiliary input jack to expand your music choices.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
jWIN JL-104 Operating instructions
-
Audiovox CE200 User manual
-
Sanyo RM-D500 User manual
-
Roberts CD Cube (CR9986)( Rev.5) User guide
-
-
-
Roberts CD Cube (CR9986) User guide
-
-
-