17
18
21
19
20
alfer
®
4<ALBBMR=jajfdf>
024 71708 0807
4-5 hrs
very demanding
demanding
simple
easy
Important advice!
Technical data:
combitech
®
forcing bed cover dimensions:
length 100.0 cm
width 75.0 cm
height 50.0 cm
All dimensions are reference values. Subject to technical
changes.
Your dealer:
alfer
®
aluminium Gesellschaft mbH
Horheim, Industriestraße 7 · D-79793 Wutöschingen
tel.: +49 (0) 77 46 / 92 01-0 · fax: 92 01-92
email: [email protected]
You can find more ideas on the Internet!
Important advice!
Assembly instructions
All parts must be original alfer
®
parts. Damaged parts should
not be used. Basic technical knowledge is required for assem-
bly.
In case of technical difficulties, advice can in some circum-
stances be sought from staff at the hardware store or possibly
from alfer
®
itself. If difficulties arise during assembly, an enquiry
should always be put to alfer
®
before changing components. Do
not deviate from the assembly instructions. Changes to materi-
als or deviations from the assembly instructions can cause
safety defects, which in case of damage may well be attributed
to such a deviation. In case of damage arising from such devi-
ations, alfer
®
accepts no liability.
Instructions for use
The permitted loading capacity must not be exceeded.
Inappropriate use will result in the right to compensation being
excluded.
Wutöschingen June 2002
alfer
®
aluminium Gesellschaft mbH
Horheim, Industriestraße 7 · D-79793 Wutöschingen
tel.: +49 (0) 77 46 / 92 01-0 · fax: 92 01-92
email: [email protected]
You can find more ideas on the Internet!
combitech
®
forcing bed cover Shopping list Pre-cut parts list
combitech
®
profiles
Product name Dimension Item no. Total quantity Quantity Pre-cut part
angle bracket, untreated aluminium 11.5 × 1.5 mm 25564 8 m 4 982 mm
4 390 mm
2 700 mm
angle bracket, untreated aluminium 7.5 × 1.0 mm 25562 2 m 4 383 mm
flat bar, untreated aluminium 15.5 × 2.0 mm 25806 2 m 2 150 mm
tube, 1 short side piece, untreated aluminium M 5 26062 2 m 2 668 mm
4 150 mm
tube, 2 side pieces 90°, untreated aluminium M 8 26304 3 m 4 300 mm
1 1000 mm
tube, 2 side pieces 180°, untreated aluminium M 8 26224 1 m 2 495 mm
thread rod, PA natural M 5 30042 3 m 2 985 mm
2 50 mm
square tube 1 side pc., untreated aluminium 7.5 × 14.0 × 1.0 mm 25882 4 m 4 1000 mm
combitech
®
small parts
Product name Dimension Item no. Total quantity Quantity Pre-cut part
tube, 1 short side piece, finished aluminium M 5 26042 2 bags 4
hexagonal nut, PA natural M 5 30092 2 bags 8
blind rivets 5 × 10 mm 48
glass 2 365 × 1000 mm
2 980 × 295 mm
4 340 × 490 mm
Notes
English
combitech
®
construction plan
forcing bed cover
1 52
3
4
6
7
8
9 10 11
12
13
14
15
16
2x
2x
2x
2x
2x
/