Channel Plus DMT-24 User manual

2005 CATALOG

“Innovations in video,voice and data”

Over two decades of excellence in video, voice, and data products.

For over 20 years, the ChannelPlus product line has been acknowledged as the premier brand in multi-room

audio/video distribution systems. Innovative design and dependable performance have made ChannelPlus the

number one choice of professional installers.

ChannelPlus products are used in residential homes and commercial installations such as restaurants,

sports bars, training facilities, and schools. Homeowners can enjoy an advanced integrated home network that

provides outstanding picture quality to every TV, clear telephone connections, easy satellite access, a residential

gateway for data networking, and the ability to watch a front door camera, DVD, and VCR from every TV in the

house. Why limit home theater to one room? With the addition of a ChannelPlus stereo modulator, homeowners

can distribute home theater all throughout the house.

ChannelPlus products include a complete line of modulators, cameras, enclosures, RF amplifiers, distribution

panels, and telephone products. And ChannelPlus is one of the many household technology brands of Linear LLC.

No strings attached 2/5/15 warranty.

Don’t worry about fine print on a ChannelPlus warranty. There is none. We do not require that the installation

be done by a certified installer (although we do recommend it). We do not void our warranty if other products

are used with ours in the same systems. We offer two years on audio amplifiers and data products, and five years

on active products* (such as amplifiers, modulators, and infrared receivers). On passive products, we offer a full

15 years* (passive products include rack mount accessories, filters, and splitters).

*All products in this literature are protected by one or more US and international patents, issued or pending.

All product brands mentioned in this catalog are trademarks or registered trademarks of their respective manufacturers.

ChannelPlus products delivered direct to you.

MTExpress

®

is our full-line ChannelPlus, Linear, and OpenHouse product distributor.

Mail order sales are available from 7 am to 4:30 pm Pacific Time weekdays:

By Phone: 888-996-4949

By Fax: 888-996-4950

Internet sales are available 24 hours a day.

www.mtx-sales.com

Telephone support for dealers and installers.

Call 800-999-5225 for toll-free,

US-based technical assistance 7 am to 4:30 pm Pacific Time every business day.

CONTENTS

INTRODUCTION

ChannelPlus and Structured Wiring 2

New Product Highlights 3

PRE-WIRE AND INTEGRATED SYSTEMS

Pre-Wire Cabling 4

Pre-Wire for Audio, Video, and Television 5

Pre-Wire for Telecommunications and Cameras 6

Pre-Wire for Data 7

S-VIDEO DISTRIBUTION

True 8x8 Audio/Video Matrix Switcher 8

Audio/Video Switcher 10

Video Distribution Over CAT-5 Cable 12

Video Distribution Panel 13

S-Video Modulators 14

STRUCTURED WIRE

Data and Telephone Distribution Modules 16

Ethernet Router and Switch 17

TAP (Total Access Port) Wall Plates 18

Rack Mount Accessories 19

RF-DISTRIBUTION

RF Distribution Amplifiers 20

Distribution Amplifiers 22

RF Amplifiers 24

MODULATION

Modulators 26

Modulator Starter Kits 28

All-In-One Video Distribution 30

IR ACCESSORIES

Infrared Accessories 32

MUSIC DISTRIBUTION

Multi-Source, Multi-Zone Music Distribution 34

CAMERAS

Black and White; Color Cameras 36

COMBINERS AND SPLITTERS

Splitters, Combiners, and Taps 38

ACCESSORIES

Accessories and Filters 40

REFERENCE GUIDES

Digital Television 41

RF Troubleshooting 42

RF System Design 43

Power Supply Chart 44

International Standards 45

Frequency Spectrum 46

Glossary of RF and Data Terms 47

INDEX 49

800.999.5225 • www.channelplus.com 1

2 800.999.5225 • www.channelplus.com

STRUCTURED WIRE FOR THE CUSTOM HOME

SVS-52

Five source A/V switcher

SVC-10

Delivers S-video and audio over CAT-5

to a remote location up to 1,000’ away

SVM-22

2-channel S-video stereo modulator

SVM-24

4-channel S-video stereo modulator

MDS-6A

Music distribution for six audio sources

to six rooms

DMT-24

Telephone distribution for four lines to 24

locations

DMT-16

Telephone distribution for four lines to

16 locations

DMD-16

16-port CAT-5e termination panel for data,

telephone, or A/V

DA-550HHR/BID

RF Distribution Amplifier to eight locations

DA-506BID

RF Distribution Amplifier to six locations

DA-8200HHR/BID

RF Distribution Amplifier to eight locations

H638

Ethernet Switch networks home computers,

printers, etc.

H634

Ethernet broadband residential gateway

routes data from DSL or cable modem

2619

10-space rack mount grid system

•

800.999.5225 • www.channelplus.com 3

Audio/Video Distribution

SVS-88

True 8x8 switching of S-video,

composite video, stereo audio, and

Dolby

®

digital audio, plus IR control.

See pages 10-11 for details

Music Distribution

MDS-6A; MCS-1A; MCS-2A

Multi-room, multi-source, 6x6 music

distribution system with 40 watts/

channel and keypad control.

See pages 34-35 for details

Modulation

5415; 5425; 5435; 5445

Economically priced, one, two, three,

and four channel mono modulators

with loop-through capabilities.

See pages 26-27 for details

Accessories

TAP (Total Access Port) Wall Plates

Self-mapping, easy-to-terminate wall

plates — dual data, data/telephone,

data/telephone/coax, and telephone/

coax models available in three colors.

See page 18 for details.

CHANNELPLUS

®

NEW PRODUCTS 2005

4 800.999.5225 • www.channelplus.com

The demand for multi-room video entertainment and telecommunications

(telephone, fax, computer, and data networking) is easily satisfied with the

installation of RG-6 coax and CAT-5 UTP wire. The key is to pre-wire. When you

put the right cables in the walls, the rest is easy.

An important feature of the ChannelPlus integrated home network is that it

utilizes industry-recognized cabling. The cable types listed here are available from

a wide variety of manufacturers ensuring both competitive prices, availability,

and compatibility now and in the future.

CABLE TYPES AND USAGE

RG-6

RF sources like CATV, off-air NTSC, and off-air ATSC (HDTV) use RG-6 coax with

standard foil shield and aluminum braid. For DBS satellite installations — from dish,

to multi-switch, to receiver — use standard RG-6. It is perfect for most residential

situations. In commercial or extreme noise environments (such as near a radio or

television transmitter tower), use quad-shielded RG-6.

CAT-5

Category 5 is recommended for telecommunication, camera, and data applications.

Consumers building a new home will often want to provide a computer network in

order to protect the long-term resale value of the home. Installing and terminating

the cable is as simple as a telephone installation. CAT-5 is made up of four

unshielded twisted pairs (UTP). This type of cable is easy to find and by changing

the termination jacks, you can upgrade the wiring for future applications such as

video distribution.

PRE-WIRE WITH INDUSTRY STANDARD CABLING

CAT-5 TELEPHONE PAIRS

CAT-5 CONNECTION TO

TOTAL ACCESS PORT WALL PLATE

CAT-5 DATA TERMINATION

800.999.5225 • www.channelplus.com 5

PRE-WIRE AUDIO/VIDEO AND TELEVISION WITH RG-6 COAX

PRE-WIRE GUIDE

Using RG-6 white and black coaxial

cable, install the following cable runs

from the network enclosure:

• One black coax from each TV

or computer location.

• One white coax from everywhere

one or more video sources might

be located.

• Video sources include VCRs, satel-

lite receivers, TiVo, DVD players,

cameras, computers, and Internet

TV products.

• One white coax from the CATV

demarcation point.

• One white coax to a place where

an off-air antenna might be located.

• Four white coax to a place where a

satellite dish with a dual LNB might

be mounted.

cable: coaxial cable type RG-6 75Ω

connectors: type F

applications: CATV, antenna,

audio/video, and satellite.

COLOR CODING

white RG-6 coax: use as a “send”

or “upstream” cable from modulators

to distribution panel

black RG-6 coax: use as “receive”

or “downstream” cable from

distribution panel to TVs

6 800.999.5225 • www.channelplus.com

PRE-WIRE TELEPHONE, MULTI-ROOM AUDIO,

AND SECURITY CAMERAS with CAT-5 or CAT-5e

PRE-WIRE GUIDE

Using gray or white Category 5 or

Category 5e cable, install the

following cable runs from the net-

work enclosure:

• One from each telephone location.

• One from the location(s) where

a satellite receiver might be located.

• One from each video camera

location (front door, back door,

baby’s room, backyard).

• One from the telephone company’s

demarcation point.

• One from the front door for

installing an intercom.

• Two from the media center for video

and audio distribution and control.

cable: Category 5 or Category 5e

connectors: jacks and plugs type

RJ-11 (1 pair), type RJ-14 (2 pair),

and type RJ-25 (3 pair)

applications: telephone, fax, com-

puter modem, and video cameras

COLOR CODING

gray or white: telephone

yellow: demarc and gateway

800.999.5225 • www.channelplus.com 7

PRE-WIRE DATA NETWORKING AND INTERNET

with CAT-5e

PRE-WIRE GUIDE

Using Category 5e cable, install the

following cable runs from the net-

work enclosure:

• One from each computer location.

• One from any location(s) where a

computer peripheral (such as a

printer) might be located separately

from the computer.

• One at any location where access

to the network is desired (kitchen,

bedroom, or den).

cable: Category 5e

connectors: jacks and plugs are

Category 5e, type RJ-45 (4 pair)

applications: printer sharing, 10

BASE-T (Ethernet) or 100 BASE-T

(Fast Ethernet)

COLOR CODING

blue: data

8 800.999.5225 • www.channelplus.com

VIDEO DISTRIBUTION

TRUE 8x8 AUDIO/VIDEO MATRIX SWITCHER

Our SVS-88 is an industry leader in solid 8x8 switching with volume control,

S-video, stereo, or digital audio options, plus IR control. Up to 8 S-video

(or composite video with an external adapter) sources can be switched using the

SVS-88. Composite is up converted to S-video. DVRs, VCRs, DVD players, cable

boxes, and satellite receivers, including digital audio, can be converted to CAT-5

and transmitted up to 1,000 feet by adding our SVC-10 to the system. Inputs can

be switched at the remote locations using an IR remote. IR is passed back down

the same CAT-5 cabling from the remote location.

When multiple locations are needed, our

SVD-8 can expand the output to eight different

locations up to 1,000 feet away. For more

locations, additional SVD-8s can be added.

SVS-88 FEATURES

• Audio/video matrix switcher

• Any eight A/V inputs switched to any eight

A/V outputs

• All video connections are S-video type (composite video can be used with an

external adapter)

• Stereo audio analog and digital inputs and outputs

• Linear or logarithmic volume control for each output

• Simple text based commands for PC control

• Compatible with Crestron

®

, Elan

™

, AMX

®

and other home control systems

• RS-232 and RS-485 interface

• Switches PAL, SECAM, NTSC

• Front panel controls with pushbuttons and 7-segment displays

• IR control with built-in command set

• Set-top or rack mount

• International power supply

SUGGESTED USES

• Home theaters, whole-house video systems, sports bars, stadiums, casinos,

schools

• Any place that needs quality video to multiple locations up to 2,000 feet using

SVC-10, SVD-8, and SVC-10R components

model SVS-88

NEW!

800.999.5225 • www.channelplus.com 9

SPECIFICATIONS SVS-88

ELECTRICAL Input Voltage Range 100-240 VAC 50/60 Hz

Power Consumption 65 Watts maximum

Nominal Audio/Video Input/Output Levels 1 volt peak-to-peak

Audio/Video Shutdown Levels 3 volts peak-to-peak

CONNECTOR TYPES Video S-video (16)

Stereo Audio RCA (32)

Digital Audio RCA (16)

RS-232 9-pin sub-D (1)

RS-485 Expansion Ports RJ-12 (2)

Direct IR Input 3.5 mm jack (1)

Power Cord Connector EIC-320 (1)

MECHANICAL Dimensions 16-3/4” W x 3-1/2” H x 13-3/4”

Weight 16 lbs. (18 lbs. boxed)

Connection Diagram for SVS-88, SVC-10, SVD-8

10 800.999.5225 • www.channelplus.com

VIDEO DISTRIBUTION

5-SOURCE VIDEO/AUDIO SWITCHER

The SVS-52 video/audio switcher allows users to choose between five video/audio

sources. This versatile product operates as a stand-alone or expansion video/audio

switcher for home theater and music systems. Combine the SVS-52 with the SVC-10

and have multi-source selection capabilities up to 1,000 feet away. The SVS-52 can be

used in RS-232 based multi-unit installation systems like Crestron

®

, Elan

™

, and AMX

®

.

FEATURES:

• Five S-video/composite video and analog/digital audio inputs

• Five S-video/composite video and analog/digital audio outputs

• Composite to S-video conversion on all video inputs

• Cross conversion of optical and coax digital inputs

• IR and RS-232 control interfaces

• Front panel convenience inputs

• Remote control included

• Direct source selection

• IR learning capabilities

• Broadcast quality switching

• Auto/manual seek modes

ELIMINATES:

• Limited inputs on A/V receivers or televisions

• Poor video switching quality from A/V receivers

• Low quality composite to S-video conversion from passive products

• The need for costly digital audio signal conversion products

SUGGESTED USES:

• Add five additional video/audio inputs to an A/V receiver

• Add five additional video/audio inputs to a TV or monitor

• Add source selection capabilities to a single channel modulator

• Create a security system with five video cameras on a single channel or combine

three SVC-52s and maintain IR control with a single remote control

• Combine with SVC-10 to distribute S-video and digital audio up to 1000’ away

over one CAT-5 cable.

model SVS-52

800.999.5225 • www.channelplus.com 11

SPECIFICATIONS: SVS-52

typical @ 25

o

C +_ 5

o

INPUTS & OUTPUTS S-video/composite video 5 inputs x 2 outputs

optical digital audio 3 inputs x 1 output

audio digital/analog 5 inputs x 2 outputs

gain 1.0 nominal (2 ports)

video level 1 V p-p @ 75Ω

audio level 1 V rms @ 47kΩ

VIDEO PERFORMANCE video bandwidth <0.1 dB (0-4 MHz)

crosstalk (0-4 MHz) >70 dB

RS-232 pin out 2 TX, 3 RX, 5 GND

protocol 9600 baud, 8 bit, 1 stop, no parity

POWER SUPPLY model number 350-103

output current 600mA

output voltage 15 Vdc

input power 105-125 Vac

power consumption 8 watts typical

PHYSICAL height 1.75” (4.4 cm)

width 17” (43.2 cm)

depth 6.5” (16.5 cm)

weight 2 lbs, 10 oz (1.19 kg)

Distributed Multi-Source Home Theater Installation

EXPORT MODELS AVAILABLE

(SEE PAGE 49)

12 800.999.5225 • www.channelplus.com

VIDEO DISTRIBUTION

POINT-TO-POINT S-VIDEO DISTRIBUTION SYSTEM

The SVC-10 delivers true, unconverted S-video or composite video, digital audio or

analog audio over CAT-5 up to 1,000 feet away. Simply place the SVC-10 transmitter

at the source and the SVC-10R receiver at a remote location. The integrated IR

makes it possible to control the source with a click of the remote*. Use the SVC-10

to distribute both audio and video or distribute audio alone.

*Target and emitter required

FEATURES:

Transmitter

• Composite and S-video inputs

• Digital, optical digital 5.1, and analog stereo audio inputs

• Auto termination loop-through

• IR emitter and RJ-45 CAT-5 outputs

• 19-inch rack mountable (one space)

• Automatic optical to coax digital audio conversion

• Adjustable picture compensation for length of wire run

Receiver

• Composite and S-video outputs

• Coax digital and analog audio outputs

• 12 volt IR target input

• RJ-45 CAT-5 input

• Compact size

ELIMINATES:

• Ground loop problems

• Stacks of components in remote rooms

• Lack of signal integrity from sending S-video over long runs

• Need for coax or multiple video and audio cables to remote locations

SUGGESTED USES:

• Distribute unconverted audio and video from music management system over single

CAT-5 cable

• Provide video and audio access to distant location such as pool house with no

ground looping problems or coax required

• Create cost effective single-zone audio distribution system with unlimited power

and simplified wiring

• Loop several units together for whole house distribution

• Deliver high quality audio and video to box seats in sports arena

• Access home theater from bedroom with full IR remote control

• Combine SVS-52 or SVS-88 (previous pages) to switch between multiple sources

model SVC-10R

(included with SVC-10)

model SVC-10

800.999.5225 • www.channelplus.com 13

SPECIFICATIONS

SVC-10 SVD-8

typical @ 25

o

C +_ 5

o

VIDEO nominal level 1.0 V P-P 1.0 V P-P

impedence 75 Ω 75 Ω

3 dB bandwidth 15 MHz 15 MHz

(worst case 1,000’)

DIGITAL AUDIO nominal level 0.5 V P-P 0.5 V P-P

impedence 75 Ω 75 Ω

3 dB bandwidth 15 MHz 15 MHz

(worst case 1,000’)

ANALOG AUDIO nominal level 1 Vrms 1 Vrms

impedence 10 Ω nominal 10 Ω nominal

3 dB bandwidth 20 Hz – 20 KHz 20 Hz – 20 KHz

(worst case 1,000’)

POWER SUPPLY included with domestic product 15 Vdc 600 mA 12 Vdc 2 amps

power consumption (transmitter) 5 watts typical

power consumption (receiver) 5 watts typical 18 watts typical

PHYSICAL transmitter size (H x W x D) 1.75” x 17.0” x 6.5” 12” x 2.4” x 1”

(4.4 cm x 43.2 cm (30 cm x 6 cm x 2.54 cm)

x 16.5 cm)

receiver size (H x W x D) 1.0” x 4.6” x 3.2” N/A

(2.54 cm x 12 cm x 8 cm)

ENVIRONMENTAL shipping weight 3.5 lbs 5 lbs

operating temperature 0°C to 50°C 0°C to 50°C

storage temperature -30°C to 70°C -30°C to 70°C

humidity 5% to 90% non-condensing 5% to 90% non-condensing

SVD-8 DISTRIBUTION PANEL WITH DIFFERENTIAL DRIVE

ENGINE

The SVD-8 distribution panel is a companion product to the SVC-10 point-to-point distribution system. Adding an SVD-8

to the system expands distribution capabilities from one to eight locations with IR capabilities at each. It also doubles the

distance that signals can be distributed to 2,000 feet using CAT-5 wire. Both the SVC-10 and the SVD-8 distribute true,

unconverted S-video, composite video, digital audio, and analog audio. The system is also compatible with SVS-52 five-

source audio video switcher and the SVS-88 eight-way matrix switcher. The system is expandable to 64 outputs.

SUGGESTED USES:

• Ideal to send single source to multiple locations over long distance (up to 2,000’)

• Combine the SVS-88, SVS-52, the SVC-10, and the SVD-8 to distribute multiple sources over long distance such as schools,

training facilities, sports bars, video stores, or light commercial applications

• Choose SVD-8 and SVC-10 when high signal integrity is important

model SVD-8

EXPORT MODELS AVAILABLE

(SEE PAGE 49)

14 800.999.5225 • www.channelplus.com

VIDEO DISTRIBUTION

S-VIDEO MODULATORS WITH

THE ULTIMATE IN MTS STEREO

SVM modulators offer complete MTS stereo encoding and S-video inputs in a

full component size rack mountable case.The SVM-22 and SVM-24 are two and

four-channel stereo modulators with 25 dBmV of output and easy push button

digital programming. The SVM series incorporates S-video inputs that support both

S-video and composite video feeds with included adapters. Offering full MTS

stereo with dbx noise reduction and compatibility with Dolby Pro Logic

®

, the

SVMs are ideal for integration into any home theater system.

INTEGRATED IR CONTROL

Each SVM modulator has IR emitter output jacks and is compatible with both

12-volt or 5-volt IR systems. With new desktop power supplies, SVM modulators

can remotely power a DA-550 or DA-8200 series distribution panel from up to

75 feet away.

AUTO-TERMINATION

The SVM series offers full loop-through outputs with 75-ohm auto-termination.

By connecting video/audio cables to the output jacks, you can have all video and

audio signals pass through for use with a local monitor, VCR, or DVR.

RACK SIZE

SVM modulators will fit any 19-inch EIA rack (mounting ears included). The SVM-22

and SVM-24 are one rack space high.

SUGGESTED USES

• When quality video and the ability to distribute S-video are important

• For remotely powering DA series amplifiers

• For installation with other home theater components in a 19-inch EIA rack

model SVM-24

model SVM-22

800.999.5225 • www.channelplus.com 15

SPECIFICATIONS SVM-22 SVM-24

typical @ 25

o

C +_ 5

o

C

INPUTS video: baseband 1.0 V P-P @ 75 Ω 1.0 V P-P @ 75 Ω

video standard NTSC NTSC

video connector type mini DIN (2) mini DIN (4)

audio: left and right 1.0 Vrms @ 10 k Ω 1.0 Vrms @ 10 k Ω

audio connector type RCA (4) RCA (8)

RF OUTPUTS number of modulators 2 4

tuning range: UHF 14-64 14-64

CATV 65-125 excluding 95-99 65-125 excluding 95-99

maximum output 25 dBmV 25 dBmV

frequency stability +_ 5 KHz +_ 5 KHz

OUTPUTS S-video mini DIN (2) mini DIN (4)

audio connector type RCA (4) RCA (8)

mts stereo yes yes

dbx noise reduction yes yes

5.1 surround sound support yes yes

signal to noise ratio >65 dB >65 dB

separation @ 1000 Hz >25 dB >25 dB

audio frequency range 20Hz to 12 KHz 20Hz to 12 KHz

IR emitter connectors mini jack (2) mini jack (4)

POWER SUPPLY included with product 15 Vdc 900 mA 15 Vdc 900 mA

GENERAL width x height x depth 1.75” x 17” x 6.5” 1.75” x 17” x 6.5”

(4.4 cm x 43.2 cm x 16.5 cm) (4.4 cm x 43.2 cm x 16.5 cm)

shipping weight 2 lbs (1 kg) 2 lbs (1 kg)

operating temperature 32

o

F to 122

o

F (0

o

C to 50

o

C) 32

o

F to 122

o

F (0

o

C to 50

o

C)

Model SVM-22 and SVM-24

16 800.999.5225 • www.channelplus.com

DATA AND TELEPHONE DISTRIBUTION MODULES

ChannelPlus DMD-16 Data Termination Hub provides a superior way to terminate

data connections. Each unit has 16 unbridged 110 punch-down termination

points that are aligned with a corresponding RJ-45 connector. Rated for CAT-5e

performance in data networks, the DMD-16 is an excellent data termination hub

for use with an Ethernet hub for LANs. The DMD-16 can also be used as a

termination point for control signals over CAT-5, video and audio signals, home

control signals, security camera video, and KSU and PBX phone systems.

STRUCTURED WIRE

Telephone Distribution Module

MODEL DMT-16

• Four lines to 16 locations

• Four line surge protection

• Labeling system

• RJ-31X

• Disconnect/test service

Telephone Distribution Module

MODEL DMT-24

• Four lines to 24 locations

• Four line surge protection

• Labeling system

• RJ-31X

• Disconnect/test service

Data Distribution Module

MODEL DMD-16

• CAT-5 certified

• Unbridged termination hub

• 16 data locations

• Labeling system

800.999.5225 • www.channelplus.com 17

ETHERNET ROUTER AND SWITCH

Connection Diagram for H634

Connection Diagram for H638

Ethernet Broadband Residential

Gateway

MODEL H634

• Certified 10/100 Base-T

performance

• Four-port router

• DSL and cable modem input

• Built-in firewall

• RJ-45 connections

• Mounting bracket included

• Replaces 8157

Ethernet Switch

MODEL H638

• Certified 10/100 Base-T

performance

• Eight-port switch

• RJ-45 connections

• Uplink port

• Expandable

• Mounting bracket attached

• Any port may be either input or uplink

• Can be combined with Model H634

18 800.999.5225 • www.channelplus.com

TAP (TOTAL ACCESS PORT) WALL PLATES

TAP (Total Access Port) wall plates come pre-configured and pre-assembled for

fast, sure installations. Pre-assembly eliminates fabrication time. Pre-configuration

eliminates messy plate wiring and wiring mistakes. Merely install coax cable on the

supplied connectors and punch down CAT-5 wire on the 110 punch-down blocks.

Each TAP is self-mapping for clear terminal assignments. No external boxes or

devices are necessary. TAP plates blend in just about anywhere, thanks to a choice

of white, almond and ivory. They are available in four configurations and are

supplied either as single units or in convenient ten-packs.

• Quicker to install

• Eliminates connection errors — TIA 570 color coded

• Offers a totally terminated connection in contrast with other systems on the market,

which are incomplete

STRUCTURED WIRE

Telephone/Coax WPx-PC

• Four RJ-25 telephone jacks

• Breaks out each telephone line to an

individual jack

• Provisions for two coax barrel connectors

(connectors included)

• Includes one pre-configured 110 punch-

down block plus two coax barrel connectors

Home Theater

Wallplate

WPW-D7.1

• Terminate

speakers for

Dolby

®

5.1,

6.1 or 7.1

• Double-gang

width

• Available in

white only

Data/Telephone WPx-DP

• Single CAT-5e RJ-45 jack and four

RJ-25 telephone jacks

• Breaks out each telephone line to an

individual jack

• Includes two pre-configured 110

punch-down blocks for termination

Data/Telephone/Coax WPx-PDC

• Our most versatile wall plate design

• One CAT-5e RJ-45 jack, two breakout RJ-25

telephone jacks, and two knock outs for

use with coax barrel

connectors (connectors included)

• Includes two pre-configured 110 punch-

down blocks for termination and two coax

barrel connectors

Dual Data WPx-DD

• Two CAT-5e RJ-45 connectors

• Decora

®

compatible design

• Includes two 110 punch-down blocks for

termination

FRONT

BACK

FRONT

BACK

FRONT

BACK

FRONT

BACK

All four TAP wall plates come in

the following colors:

White Almond Ivory

Specify A (almond), I (ivory) or W (white) in the

“x” place of the model number. For instance,

to order a WPx-PC in almond, specify WPA-PC.

To order a ten pack of any model, just add a

“-10” suffix to the model number. For instance,

WPA-PC designates a single unit; WPA-PC-10

designates a 10-pack.

NEW!

Page is loading ...

Channel Plus DMT-24 User manual

Channel Plus DMT-24 User manual

Related papers

Other documents