Page is loading ...
EL
50
LIGHT:EL
MODE:
START: ,
CHRONO: , 0
EL 3 C
M S S
S S C 0 0 00 00
S C C
M 2 S C S
M C S
M 3 C S
12/24 12
PM 12 24
L
M
C
Skmei watch direct sales
www.skmei-watch.com
SKMEI Model #1090 User Manual
1. Features
Display Time,date and alarm
12/24H formats
Chronograph with split function
EL backlight
50M Water Resistant
2. Modes of Watch
In normal display modes: press M chronogr
aph mode alarm setting mode time setting mode
In normal time display mode, press L, the EL backlight will last for 3 seconds and the screen
will display the date;
In normal time display mode, press C to view the alarm setting time.
Chronograph Function
The display range of the chronograph is 23 hours, 59 minutes, 59.99 seconds.
In normal time display mode, press M once to enter into the chronograph mode, press L key to
start the running, press L again to pause or stop, press L to continue the running, press L to
stop the chronograph, press C to set the data to zero.
*Split time function:
a) While chronograph is running, press C to activate split time
b) Press L to exit or stop split count
c) When split time is stopped, press C to display last count; Press C to reset counts to zero
d) Press M to return to Normal Time Mode
Alarm Setting
In normal time display mode, press the M twice times enter into Alarm mode and hours is
flashing , press L to set the hour you desire; Press C and the minutes is
flashing, press the L to set the minutes you desire.
Press the M key to exit.
ALARM ON/OFF
Hold the C key and S key together to ON/OFF alarm function. When the alarm function is on,
you can see the small icon of AL above the number of the middle eye. When the alarm
function is off, the AL icon will disappear.
Time & Date Settings:
In Normal display mode, Press the M three times to enter time setting mode and the
seconds is flashing.
Minutes:Press C, the minutes will flash, press L key to reach the correct minutes;
Hours: Press C again, the hours will flash, press L to reach the correct hours;
Dates: Press C again, the dates will flash, press L to reach the correct dates;
Months: Press again, the months will flash, press L to reach the correct months.
Press C again, the seconds is flashing, press L to set the seconds to zero.
Press M to exit.
/
