Minute Molding 83061 Installation guide

Brand
Minute Molding
Model
83061
Type
Installation guide

Minute Molding 83061 is an easy-to-install door header that can be used to upgrade the look of your door in minutes. It is a universal fit that can be adjusted to fit 28” to 36” doors, and it can be easily cut down to fit smaller doors. The header is made of a recyclable material and comes with a patent-pending design. It is easy to install, requiring no tools or skills. Simply apply a bead of caulk to the groove on the back side of the header and press it firmly over the existing door casing. Once secure, center and place the keystone.

Minute Molding 83061 is an easy-to-install door header that can be used to upgrade the look of your door in minutes. It is a universal fit that can be adjusted to fit 28” to 36” doors, and it can be easily cut down to fit smaller doors. The header is made of a recyclable material and comes with a patent-pending design. It is easy to install, requiring no tools or skills. Simply apply a bead of caulk to the groove on the back side of the header and press it firmly over the existing door casing. Once secure, center and place the keystone.

Universal Fit / Adjusts to fit 28” to 36” doors / *header can be easily cut down to fit smaller doors
Ajuste universal / Se adapta para ajustarse a puertas de 28” a 36” (pulgadas) /
*la parte superior puede cortarse fácilmente para ajustarla a puertas más pequeñas.
Minute
Molding
Easy, Quick-Stick Door Header!
Installs in minutes No tools or skills needed Fits most doors
INSTANT DOOR
UPGRADE!
ACTUALIZACIÓN
DE PUERTA DE
INMEDIATO
Installation Instructions / Instrucciones de Instalacion
Apply 1/4” (.25
inches) bead of
caulk along the groove
on the back side of the
Left & Right parts of
the header. Take care
to apply caulk where
it will come in contact
with the existing
casing.
Aplique 1/4’’ (,25 pulgadas)
de sellador en la ranura de
la parte trasera, izquierda y
derecha del cabezal. Tenga
cuidado de aplicar el sellador
en las partes donde entrará
en contacto con la cubierta
existente.
1
Apply and
smooth a thin
bead of caulk to
edges of the header
where it meets the
wall and casing
along with where the
keystone attaches.
Prime & paint to
match existing trim.
Aplique y suavice una
tira na de sellador en
los bordes del cabezal
que entrarán en contacto
con la pared y la cubierta
junto con el agarre para
la piedra. Prepare y pinte
para que el color coincida
con el resto.
3
Press the
Left & Right
header parts rmly
over the existing
door casing. Once
secure, center and
place the keystone.
Presione la parte
izquierda y derecha del
cabezal rmemente sobre
la cubierta existente. Una
vez asegurado, centre y
coloque la piedra clave.
2
Minute
Molding
BEFORE
AFTER
¡
Cabezal para puerta fácil y rápido de pegar!
Se instala en
minutos
No necesita herramientas
o habilidades
Apto para la mayoría
de las puertas
AS EASY AS 1-2-3! /
¡
TAN FÁCIL COMO CONTAR HASTA TRES!
P
A
I
N
T
T
O
M
A
T
C
H
YOUR TRIM WORK
Model # 83061
Patent Pending
Made in China
Recyclable Material
Patente Pendiente.
Hecho en China
Material reciclable.
www.MinuteMolding.com
877-425-1640
Antes
Después
  • Page 1 1

Minute Molding 83061 Installation guide

Brand
Minute Molding
Model
83061
Type
Installation guide

Minute Molding 83061 is an easy-to-install door header that can be used to upgrade the look of your door in minutes. It is a universal fit that can be adjusted to fit 28” to 36” doors, and it can be easily cut down to fit smaller doors. The header is made of a recyclable material and comes with a patent-pending design. It is easy to install, requiring no tools or skills. Simply apply a bead of caulk to the groove on the back side of the header and press it firmly over the existing door casing. Once secure, center and place the keystone.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Other documents