1
ADC-68M/50M
Shielded Cable for CardBus
Analog I/O Card
ADC-68M/50M User’s Guide
CONTEC CO.,LTD.
ADC-68M/50M is a cable which converts 68-pin 0.8mm-pitch connector of the interface made of
CONTEC card into 50-pin mini-ribbon connector.
External Dimensions
500mm
68
35
1
34
1
5025
26
39.7mm11.7mm
43.3mm
50mm
7mm
53.8mm
17mm
Specifications
Item Specification
68-pin
0.8mm-pitch
connector: HDRA-E68MA1 [HONDA]
or equivalent
Thumb screw: M2
Connector used
50-pin mini-ribbon connector: 0150-6000EL[3M]
or equivalent
Cable
46 core shield cable (23pair). Conductor size : AWG#30
Conductor composition : 7pcs/0.1mm
UL20276
Weight 120g
Notes!
- Do not strike or bend the product. Otherwise, the product may malfunction, overheat, cause a
failure or breakage.
- Do not insert or remove the connector while the power is turned on to the PC. Failure to observe
this precaution may cause malfunction, overheating.
- The specifications of this product are subject to change without notice for quality improvement.
Even when using the product continuously, be sure to read the manual and understand the contents.
- Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for any results of using the product.
- All relevant issues have been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.
ADC-68M/50M User’s Guide
Copyright 2004 CONTEC CO., LTD. ALL RIGHTS RESERVED.
CONTEC CO., LTD. July 2004 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
Japanese http://www.contec.co.jp/
English http://www.contec.com/ A-46-923 (LYEC021)
Chinese http://www.contec.com.cn/ [07232004]
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
Connection Diagram
63
29
34
68
67
33
66
32
31
65
64
30
23
61
58
60
26
27
24
57
11
6
7
3
33
8
35
36
34
9
10
30
31
32
4
5
29
2
26
27
1
28
68-pin
0.8mm-pitch
Connector
Pin No.
50-pin mini-ribbon
Connector
Pin No.
68-pin 0.8mm-pitch
Connector
Pin No.
50-pin mini-ribbon
Connector
Pin No.
Shell
Shield
Shell
25
23
24
47
49
22
1
35
2
36
3
37
19
5
15
6
13
7
17
16
8
42
46
9
44
10
40
11
38
12
42
41
13
47
21
4
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Contec CNT-68M/50M Owner's manual
-
-
-
Contec CNT-3204MT-LPE Owner's manual
-
-
-
-
-
-