Eurotech CPU-162-22 Owner's manual

Brand: Eurotech

Model: CPU-162-22

Type: Owner's manual

CPU

-162-22

COM Express Basic Typ

e 6 - Intel Core and Celeron

USER MANUAL

Rev.

1-0 – 19 June 2018 – CPU-162-22 _UserMan_EN_1-0 – ENGLISH

Trademarks

All trademarks and registered trademarks are the property of their respective owners.

Intended audience for this document

This document is intended for system integrators: skilled persons with a thorough knowledge in linking

together different computing systems and software applications physically or functionally, to operate as a

coordinated whole, in compliance with the applicable regulations.

Revision history

Revision

Description

Date

1-0

First release

19 June 2018

CPU-162-22 User Manual 1-0 Contents

3 /

CONTENTS

Contents ...................................................................................................................................................................... 3

1 Safety Instructions ............................................................................................................................................. 5

1.1 Safety messages used in this document ................................................................................................. 5

1.1.1 Safety messages for hazards with a high level of risk ............................................................ 5

1.1.2 Safety messages for hazards with a medium level of risk ...................................................... 6

1.1.3 Safety messages for hazards with a low level of risk .............................................................. 6

1.2 Other messages used in this document .................................................................................................. 6

1.2.1 Instructions on how to use the product effectively and avoid any damage ............................ 6

1.3 How to prevent electrostatic discharge.................................................................................................... 7

1.4 How to safely connect power to the product ........................................................................................... 7

1.5 Residual risks and placement of safety signals ....................................................................................... 8

2 How to receive Technical Assistance............................................................................................................. 9

2.1 How to ask for technical support ............................................................................................................. 9

2.2 How to send a product for repair ............................................................................................................. 9

3 Declaration of conformity ............................................................................................................................... 11

3.1 CE Marking ............................................................................................................................................ 11

3.2 WEEE compliance ................................................................................................................................. 11

3.3 RoHS compliance .................................................................................................................................. 11

4 Before using the product ................................................................................................................................ 12

5 Product specifications .................................................................................................................................... 13

6 Concept ............................................................................................................................................................. 15

6.1 COM Express Module Standards .......................................................................................................... 15

6.2 Specification Comparison Table ............................................................................................................ 16

7 Hardware Installation ....................................................................................................................................... 18

7.1 Board Layout ......................................................................................................................................... 18

7.2 Block Diagram ....................................................................................................................................... 19

7.2.1 CPU Module .......................................................................................................................... 20

7.3 System Memory ..................................................................................................................................... 21

7.3.1 How to install the SODIMM Modules .................................................................................... 22

7.4 Power ON LED ...................................................................................................................................... 24

7.5 Connectors ............................................................................................................................................ 25

7.5.1 CPU Fan Connector .............................................................................................................. 25

7.5.2 COM Express Connectors .................................................................................................... 26

7.5.3 COM Express Connector Signal Description ........................................................................ 30

7.6 Installing the CPU-162-22 onto a Carrier Board .................................................................................... 46

8 BIOS Setup Utility ............................................................................................................................................ 49

8.1 Overview ................................................................................................................................................ 49

8.1.1 Default Configuration ............................................................................................................ 49

8.1.2 How to enter the BIOS Setup Utility ...................................................................................... 49

8.1.3 Keys function ......................................................................................................................... 50

8.1.4 Scroll bar function.................................................................................................................. 50

8.1.5 The Submenu symbol ........................................................................................................... 50

8.1.6 Main ....................................................................................................................................... 51

8.1.7 Advanced .............................................................................................................................. 52

Contents CPU-162-22 User Manual 1-0

/ 78

8.2 Security .................................................................................................................................................. 63

8.2.1 TPM Availability ..................................................................................................................... 63

8.2.2 TPM Operation ...................................................................................................................... 63

8.2.3 Clear TPM ............................................................................................................................. 63

8.2.4 Set Supervisor Password ...................................................................................................... 64

8.2.5 Set All HDD Password .......................................................................................................... 64

8.2.6 Set All Master HDD Password .............................................................................................. 65

8.2.7 Storage Password Setup Page ............................................................................................. 65

8.2.8 Set Master Hdd Password .................................................................................................... 66

8.3 Boot........................................................................................................................................................ 67

8.3.1 Numlock ................................................................................................................................ 67

8.3.2 Boot Type .............................................................................................................................. 67

8.3.3 PXE Boot to LAN ................................................................................................................... 67

8.3.4 USB Boot ............................................................................................................................... 67

8.3.5 Legacy ................................................................................................................................... 68

8.4 Exit ......................................................................................................................................................... 71

8.4.1 Exit Saving Changes ............................................................................................................. 71

8.4.2 Load Optimal Defaults ........................................................................................................... 71

8.4.3 Discard Changes ................................................................................................................... 71

9 BIOS POST Codes ........................................................................................................................................... 72

9.1 SEC Phase 8-Bit POST Code Values ................................................................................................... 72

9.2 PEI Phase 8-Bit POST Code Values ..................................................................................................... 72

9.3 DXE Phase 8-Bit POST Code Values ................................................................................................... 72

9.4 BDS Phase 8-Bit POST Code Values ................................................................................................... 73

9.5 PostBDS Phase 8-Bit POST Code Values ............................................................................................ 73

9.6 ACPI 8-Bit POST Code Values ............................................................................................................. 73

9.7 SMM 8-Bit POST Code Values ............................................................................................................. 73

Troubleshooting ....................................................................................................................................................... 74

Troubleshooting Checklist................................................................................................................................ 74

Monitor/Display ................................................................................................................................................ 74

If the display screen remains dark after the system is turned on: ....................................................... 74

The picture seems to be constantly moving. ....................................................................................... 74

The screen seems to be constantly wavering. .................................................................................... 74

Power Supply ................................................................................................................................................... 74

When the computer is turned on, nothing happens............................................................................. 74

Hard Drive ........................................................................................................................................................ 75

Hard disk failure. .................................................................................................................................. 75

Excessively long formatting period. ..................................................................................................... 75

Serial Port ........................................................................................................................................................ 75

The serial device (modem, printer) doesn’t output anything or is outputting garbled characters. ...... 75

Keyboard .......................................................................................................................................................... 75

Nothing happens when a key on the keyboard was pressed. ............................................................. 75

System Board .................................................................................................................................................. 75

Notes ......................................................................................................................................................................... 77

CPU-162-22 User Manual 1-0 Safety Instructions

5 /

1 SAFETY INSTRUCTIONS

IMPORTANT: Read carefully and understand the instructions and warnings contained in this

document before installing / using the product. Keep this document for future reference.

To lower the risk of personal injury, electric shock, fire or damage to equipment, observe the

instructions and warnings contained in this document.

Failure to comply with the instructions and warnings contained this document, violates the standards of

safety, design, manufacture, and intended use of the product.

Eurotech assume no liability for any damage caused by failure to observe the instructions and

warnings contained this document.

Whenever you have any doubt regarding the correct understanding of this document, contact the

Eurotech Technical Support (for more information see “How to receive Technical Assistance” on page

9).

1.1 Safety messages used in this document

1.1.1 Safety messages for hazards with a high level of risk

To indicate a hazard with a high level of risk which, if not avoided, will result in death or serious

injury, the following safety message is used; the message also contains the safety instructions to

follow to avoid any hazard:

DANGER

Example:

DANGER

HIGH VOLTAGE INSIDE.

CONTACT WILL CAUSE ELECTRIC SHOCK OR BURN.

Turn OFF and disconnect power before opening the rack.

Safety Instructions CPU-162-22 User Manual 1-0

/ 78

1.1.2 Safety messages for hazards with a medium level of risk

To indicate a hazard with a medium level of risk which, if not avoided, could result in death or

serious injury, the following safety message is used; the message also contains the safety

instructions to follow to avoid any hazard:

WARNING

1.1.3 Safety messages for hazards with a low level of risk

To indicate a hazard with a low level of risk which, if not avoided, could result in minor or moderate

injury, the following safety message is used; the message also contains the safety instructions to

follow to avoid any hazard:

CAUTION

1.2 Other messages used in this document

1.2.1 Instructions on how to use the product effectively and avoid any damage

To indicate:

• Instructions on how to use the product effectively

• Instructions on how to avoid damaging the product or third-party property (not related to personal

injury),

the following message is used:

NOTICE

SIGN

(if necessary)

Text with the instructions to follow to complete the specific task

(written with bold characters).

CPU-162-22 User Manual 1-0 Safety Instructions

7 /

1.3 How to prevent electrostatic discharge

NOTICE

HOW TO PREVENT DAMAGING ELECTROSTATIC-SENSITIVE DEVICES

The symbol on the left is applied on electrostatic-sensitive devices.

To prevent damaging electrostatic-sensitive devices:

• Handle the electrostatic-sensitive devices in an ESD Protected Area (EPA)

• Observe the appropriate antistatic precautions. For example: use a wrist

strap kept in constant contact with bare skin and attached to ground.

1.4 How to safely connect power to the product

To safely connect power to the product:

• Observe all the instructions for safety, installation, and operation

• Never operate with wet hands

• Use certified power cables

• Make sure the power cables are not damaged before using them

• Make sure that the power cables meet the power requirements of the device

• Position cables with care. Do not position cables in places where they may be trampled or

compressed by objects placed on them

• Make sure that the power-points and plugs are not damaged before using them

• Do not overload the power-points and plugs

• Use a power supply that meets the requirements stated on the identification label of the

product. In case of uncertainties about the required power supply, contact the Eurotech

Technical Support Team (for more information see “How to receive Technical Assistance”

on page 9).

Safety Instructions CPU-162-22 User Manual 1-0

/ 78

1.5 Residual risks and placement of safety signals

The following safety signals are placed on the product to highlight the residual risks that still exist.

Ref #

Warning signal

Meaning

CUT INJURY - DO NOT TOUCH

The fan cooler has moving parts that can cut while the product is

turned ON.

DO NOT touch the fan cooler

Always disconnect the energy source before servicing the product

HOT SURFACE - BURN HAZARD - DO NOT TOUCH

Heatsink is hot while the product is turned ON.

DO NOT touch the heatsink.

Always allow the heatsink to cool before servicing the product

CPU-162-22 User Manual 1-0 How to receive Technical Assistance

9 /

2 HOW TO RECEIVE TECHNICAL ASSISTANCE

2.1 How to ask for technical support

To ask for technical support, complete the following steps

1. Go to the Eurotech Global Support Centre: https://support.eurotech.com/

2. Submit a support request

3. Wait for the reply from the Support Team with the information you required

2.2 How to send a product for repair

To send a product for repair, complete the following steps:

1. Go to the Eurotech Global Support Centre: https://support.eurotech.com/

2. Submit an RMA request

3. Wait for the reply from the RMA Department. It will contain:

• The RMA number

• The shipping information

4. Pack the product adequately using anti-static material and place it in a sturdy box with enough

packing material to protect it from shocks and vibrations

5. Ship the product to Eurotech following the information received from the RMA Department.

NOTICE

Any product returned to Eurotech that is found to be damaged due to inappropriate packaging

will not be covered by the warranty.

(This page has been intentionally left blank)

CPU-162-22 User Manual 1-0 Declaration of conformity

11 /

3 DECLARATION OF CONFORMITY

3.1 CE Marking

The product described in this document is CE marked.

The product meets the guidelines listed in the following sections.

Eurotech is not responsible for the use of this product together with equipment (e.g. power

supplies, personal computers, etc.) that are not CE marked and compliant with the

requirements specified in this document.

3.2 WEEE compliance

In compliance with the Directive 2012/19/EU of the European Parliament and of the Council

of 4 July 2012 on waste electrical and electronic equipment (WEEE), the symbol on the

right, shown on the product or within its literature, indicates separate collection for this

electrical and electronic equipment (EEE) that has been placed on the market after 2005.

This product, at the end of its life cycle, must be collected separately and managed in

accordance with the provisions of the current Directive on waste electrical and electronic

equipment.

Because of the substances present in the product, improper use or disposal of the refuse

can cause damage to human health and the environment.

To avoid any possible legal implications, contact your local waste collection body for full

recycling information.

3.3 RoHS compliance

The product described in this document, including all its components and its sub-assemblies, have

been manufactured in compliance with the Directive 2011/65/EU of the European Parliament and of the

Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and

electronic equipment.

Before using the product CPU-162-22 User Manual 1-0

/ 78

4 BEFORE USING THE PRODUCT

NOTICE

PREVENT ELECTROSTATIC DISCHARGE (ESD)

Always prevent electrostatic discharge: electrostatic discharge can damage

your boards, processor, disk drives, add-in boards, and other components.

To prevent electrostatic discharge:

• Handle the electrostatic-sensitive devices in an ESD-protected area

• Observe the appropriate antistatic precautions. For example: use a wrist

strap kept in constant contact with bare skin and attached to ground

Before using the product:

• Install the Heat Sink (sold separately)

• Setup the following components:

o RAM module

o Storage devices (for example a hard disk drive)

o Keyboard

o Mouse

o Display.

CPU-162-22 User Manual 1-0 Product specifications

13 /

5 PRODUCT SPECIFICATIONS

(continued on next page)

Specifications

Description

System

Processor

6th Generation Intel® Core™ Processors, BGA 1440

Intel® Core™ i7-6822EQ, Quad Core, 8M Cache, 2.0GHz (2.8GHz)

Intel® Core™ i5-6442EQ, Quad Core, 6M Cache, 1.9GHz (2.7GHz)

Factory Option: Intel® Celeron® G3902E, Dual Core, 2M Cache, 1.6GHz

Chipset

Intel® QM170

Factory Option: Intel® HM170

Memory

Two 260-pin SODIMM up to 32GB

Dual Channel DDR4 2133MHz

Graphics

Controller

Intel® HD Graphics GT Series

Feature

OpenGL up to 4.4, DirectX 12, OpenCL 2.1

• HW Decode:

o AVC/H.264, MPEG2, VC1/WMV9, JPEG/MJPEG, HEVC/H265, VP8, VP9

• HW Encode:

o AVC/H.264, MPEG2, JPEG, HEVC/H265, VP8, VP9

Display

1x VGA

1x LVDS

2x DDI (HDMI/DVI/DP++)

VGA: Resolution up to 2560x1600 @ 60Hz

LVDS: Dual channel 24-bit, resolution up to 1920x1200 @ 60Hz

HDMI: Resolution up to 4096x2160 @ 24Hz or 2560x1600 @ 60Hz

DVI: Resolution up to 1920x1200 @ 60Hz

DP++/eDP: Resolution up to 4096x2304 @ 60Hz

Triple displays

VGA+LVDS+DDI or VGA+ DDI1+DDI2

Expansion

Interface

1x PCIe x16 or 2 x PCIe x8 (Gen 3)

8x PCIe x1 or 2 x PCIe x4 or 4 x PCIe x2 (Gen 3)

1x LPC

1x I²C

1x SMBus

2x serial (TX/RX)

Audio

Interface

HD Audio

Ethernet

Controller

1x Intel® I219LM PHY with iAMT11.0 PCIe (10/100/1000Mbps)

I/O

USB

4x USB 3.0

8x USB 2.0

SATA

4x SATA 3.0 (up to 6Gb/s)

RAID 0/1/5/10

DI/O

1x 8-bit DI/O (Default: 4x input and 4x output)

Product specifications CPU-162-22 User Manual 1-0

/ 78

(continued from the previous page)

Specifications

Description

Watchdog

Timer

Output and

Interval

System Reset, Programmable via Software from 1 to 255 Seconds

Security

TPM

Factory Option

Power

Type

12V, 5VSB, VCC_RTC (ATX mode)

12V, VCC_RTC (AT mode)

Consumption

CPU TDP: 25W (Intel® Core™ i7-6822EQ, Intel® Core™ i5-6442EQ)

OS Support

• CentOS

• Windows 10 IoT Enterprise

• Support for custom carriers (Prof. Services):

o Fedora/CentOS

o Debian

o Win 10 IoT Enterprise

o RedHat

Enterprise Linux

Environment

Temperature

• Operating:

o -40°C to +85°C (Temperature Screened)

o Factory option:

 0°C to +60°C

 -20°C to +70°C

o Storage: -40°C to 85°C

Humidity

• Operating:

o 5 to 90% RH

• Storage:

o 5 to 90% RH

Mechanical

Dimensions

COM Express® Basic

95mm (3.74") x 125mm (4.9")

Compliance

PICMG COM Express® R2.1, Type 6

CPU-162-22 User Manual 1-0 Concept

15 /

6 CONCEPT

6.1 COM Express Module Standards

The figure below shows the dimensions of the different types of COM Express modules.

This product is a COM Basic module. The dimensions are 95mm x 125mm.

Concept CPU-162-22 User Manual 1-0

/ 78

6.2 Specification Comparison Table

The table below gives you a cross reference of the features supported by the CPU-162-22 respect to

the COM Express standard.

Module Pin-out - Required and Optional Features A-B Connector.

Note:

5 Indicates 12V-tolerant features on former VCC_12V signals.

6 Cells in the connected columns spanning rows provide a rough approximation of features sharing connector pins.

CPU-162-22

1 (Factory Option)

CPU-162-22 User Manual 1-0 Concept

17 /

Module Pin-out - Required and Optional Features C-D Connector.

Note:

5 Indicates 12V-tolerant features on former VCC_12V signals.

6 Cells in the connected columns spanning rows provide a rough approximation of features sharing connector pins.

CPU-162-22

Hardware Installation CPU-162-22 User Manual 1-0

/ 78

7 HARDWARE INSTALLATION

7.1 Board Layout

CPU-162-22 User Manual 1-0 Hardware Installation

19 /

7.2 Block Diagram

Hardware Installation CPU-162-22 User Manual 1-0

/ 78

7.2.1 CPU Module

Page is loading ...

Eurotech CPU-162-22 Owner's manual

Eurotech CPU-162-22 Owner's manual

Eurotech CPU-162-22 Owner's manual

Related papers

Other documents