TCL 43P20FS User guide

TCL
Brand
TCL
Model
43P20FS
Category
LED TVs
Type
User guide

This manual is also suitable for

2
Table of Contents
Chapter 1: Introduction
Precautions ...............................................................3
Warning ...................................................................3
Product ....................................................................3
Power and Plug .......................................................3
Power Cord and Signal Cable .................................3
Use Environment .....................................................3
Cleaning ..................................................................3
Hanging the TV Set on the Wall ...............................3
Sockets ......................................................................4
Remote Control Functions ...................................... 5
Installing Batteries ....................................................5
Chapter 2: Getting Started
Switching On .............................................................6
Switching Off .............................................................6
Network Connection .................................................7
Network Settings ......................................................8
TV Buttons ............................................................9
Initial Setup ..............................................................9
Chapter 3: Basic TV Operations
Accessing Channels ..............................................10
Watching Connected Devices ...............................10
Adjusting Volume ...................................................10
Accessing Smart TV Homepage ...........................10
Using TV Settings Menu .........................................10
Chapter 4: Using More of Your TV
Installing Channels .................................................11
Using Subtitles ........................................................11
Turning On/Off Subtitles .........................................11
Enabling Subtitle Languages on Digital TV
Channels ................................................................11
Selecting a Subtitle Type on Digital TV Channels ...11
Using Teletext .........................................................11
Selecting Decoding Page Language ......................11
Digital Teletext Language .......................................11
Network Wake up.....................................................12
T-Link .......................................................................12
Enabling or Disabling T-Link ...................................12
Using Auto Power On .............................................12
Using Auto Standby ................................................12
Time Shift ................................................................12
Quick Access of Time Shift .....................................12
PVR
(Personal Video Recorder)
...............................12
Using EPG
(Electronic Program Guide)
...................13
Share&See ...............................................................13
WiFi Display..............................................................14
Using Instant Power On ..........................................14
Password in Parental Control ................................14
Chapter 5: Other Information
Problems & Solutions .............................................15
Troubleshooting .....................................................16
Legal Statement ......................................................17
3
IntroductionChapter 1
Precautions
Read all of the instructions before operating the set.
Keep these instructions well for future use.
Warning
Never place a television set in an unstable location. A
television set may fall, causing serious personal injury
or death. Many injuries, particularly to children, can be
avoided by taking simple precautions such as:
-
Using cabinets or stands recommended by the
manufacturer of the television set.
-
Only using furniture that can safely support the
television set.
-
Ensuring the television set is not overhanging the
edge of the supporting furniture.
-
Not placing the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television set to
a suitable support.
-
Not placing the television set on cloth or other
materials that may be located between the television
set and supporting furniture.
-
Educating children about the dangers of climbing on
furniture to reach the television set or its controls.
If your existing television set is being retained and
relocated, the same considerations as above should be
applied.
Product
• Do not block or cover the ventilation openings on the
back cover.
• Do not push objects of any kind into this unit through
the cabinet slots as they could touch the current
carryingpartsorshort-circuitparts,resultinginre,
electric shock, or damage to the unit.
• Do not attempt to open the cabinet as this may cause
damage. There are no parts inside you can service by
yourself.Referallservicingtoqualiedpersonnel.
• Donottouchthescreensurfacewithngersasthis
may scratch or mar the TV screen.
• Do not impact the TV screen with hard pressure as
this may damage the TV screen severely.
Power and Plug
• Unplug the set under the following conditions:
-
If the set will not be used for a long period of time.
-
If the power cord or the power outlet/plug is
damaged.
-
Follow the instructions to install and adjust the
product. Adjust those controls that are covered in
these operating instructions as improper adjustment
of other controls may result in damage. If this
happens, unplug the set and refer to the service
personnel.
-
If the set is subject to impact or has been dropped
and the cabinet has been damaged.
• Where the mains plug or an appliance coupler is used
as disconnect device, the disconnect device shall
remain readily operable.
(*Where an all-pole mains switch is used as the
disconnect device, the switch shall remain readily
operable.)
Power Cord and Signal Cable
• Do not allow anything to rest on or roll over the power
cord and the signal cable.
• Protect the power cord and the signal cable from
being trampled.
• Do not overload the power cord or the power outlet.
• Do not expose the power cord and the signal cable to
moisture.
Use Environment
• Do not place the set on an unstable cart, stand, or
table.
• Place the set on a place that allows good ventilation.
• Do not use the set near damp, and cold areas.
• Do not expose the set to excessive heat such as direct
sunlight,re,orthelikeandnonakedamesources,
such as lighted candles, should be placed on the
apparatus.
• Do not expose the set to dripping or splashing and
noobjectslledwithliquids,suchasvases,shallbe
placed on the apparatus.
• Do not use the set in dusty environments.
• Operating Temperature: 5°C to 35°C (41°F to 95°F)
Operating Humidity: 20% to 80%, non-condensing
Storage Temperature: -15°C to 45°C (5°F to 113°F)
Storage Humidity: 10% to 90%, non-condensing
Cleaning
• Dust the set by wiping the screen and the cabinet with
a soft, clean cloth or some special liquid cleaner.
• Do not apply excessive force to the screen when
cleaning.
• Do not use water or other chemical cleaner to clean
the screen as this may damage the surface of the TV
screen.
Hanging the TV Set on the Wall
Warning
:
This operation requires two people.
To ensure a safe installation, observe the following
safety notes:
• Check that the wall can support the weight of the TV
set and wall mount assembly.
• Follow the mounting instructions provided with the
wall mount.
• The TV set must be installed on a vertical wall.
• Make sure to use only screws suitable for the material
of the wall.
• Make sure that the TV set cables are placed so that
there is no danger of tripping over them.
All other safety instructions about our TV sets are
also applicable here. (
Note
:
Certain TV model is not
designed to be mounted to the wall.
)
4
Introduction
Sockets
Note
:
The location and names of the sockets on the TV may vary according to TV model, and not all sockets
available on all models.
LAN
This socket can be used to connect to external modem or network
access equipment.
SPDIF socket (output)
This socket can be used to connect a compatible digital audio
receiver.
HDMI or HDMI(ARC) socket (input)
TheHDMI(High-DenitionMultimediaInterface)socketcanbe
used to connect a Blu-ray player, PC with a compatible video card
installed,certainDVDplayersorahigh-denitioncompatible
digital satellite decoder. This socket provides an uncompressed
digital connection that carries both video and audio data by way
of an integrated mini-plug cable.
USB2.0 or USB 2.0/SERVICE socket (input)
These sockets can be used to connect a USB device.
Note: The number of USB sockets on the TV may vary according
to TV model.
ANTENNA/CABLE IN socket (input)
This socket can be used to connect the outside aerial or cable
network.
COMPONENT IN(YPBPR) sockets (input)
These YPbPr sockets can be used to connect a device that
has component video sockets, such as a DVD player. The
component sockets can recognize if the device you're connecting
to is Y Pb Pr compatible. The component sockets provide
excellent picture quality because the video is separated into three
independent parts.
AV IN sockets (input)
The AV IN sockets can be used to connect a range of equipment,
including video recorders, camcorders, decoders, satellite
receivers, DVD players, or games consoles. The VIDEO IN
socket provides composite video connection.
Headphone socket (output)
This socket can be used to connect headphones or stereo
earphones.
Warning:
Excessive sound pressure from earphones and
headphones can cause hearing loss.
SPDIF
ANTENNA
/CABLE IN
LAN
Router / Modem
USB 2.0 or
USB 2.0
/SERVICE
HDD
L
R
L
R
L R
PR PB
Y
P
B
PR
Y
P
R PB Y
COMPONENT IN
(Y )
HDMI
HDMI
(ARC)
or
AV IN
V L
R
VIDEO
R
V
L
R
L
5
Remote Control Functions
Most of your television's functions are available via the menus that appear on the screen. The remote control(s)
suppliedwithyoursetcanbeusedtonavigatethroughthemenusandtocongureallthegeneralsettings.
Note
:
Figures and illustrations in this operation manual are provided for reference only and may differ from actual
product appearance. Certain function may not be available for some models, e.g. GUIDE/SUBTITLE/REC functions
are only available under DTV source. And DTV is not available for certain model.
Introduction
Installing Batteries
1.
Push to open the back cover as illustrated.
2.
Insert two AAA batteries according to the
polarities marked on the battery case.
3.
Replace the back cover as illustrated.
To switch the sound off and back on.
Standby / quit standby.
Numeric buttons
To enter channel numbers or a digit.
PRE-CH
To return to the previous channel.
LIST
To display the channel list.
/
To control the volume.
To display program information, if available.
To display the Settings menu.
P /
To change channels.
To access or exit the Smart TV homepage.
To display the Option menu.
▲/▼/
◄
/
► Navigation direction buttons.
OK
Toconrmanentryorselection.
To return to the previous menu or quit an App.
To select input source.
EXIT
To exit the Settings menu.
LANG
To select a sound type available for selected analogue TV
program; to select an audio language available for selected
digital TV program.
GUIDE
To toggle the Electronic Program Guide on or off (only
available for digital channels).
TEXT
To toggle Teletext on or off.
SUBT.
To select a subtitle language available for selected digital TV
program.
Color
buttons
To perform the corresponding function indicated at the bottom of
the screen.
To start fast reverse.
To pause playback.
To start fast forward.
REC
To record programs under DTV source.
To start playback.
To stop playback.
ToaccessNetix.(Notavailableforsomemodels.)
6
Chapter 2 Getting Started
Switching On
Follow the instructions on this page on how to switch on your TV set
and the remote control before going on to following pages describing
how to use the channel set-up procedure.
1.
Insert two AAA batteries in the remote control.
Precautions on using batteries:
-Onlyusethebatterytypesspecied.
- Make sure you use the correct polarity.
- Do not mix new and used batteries.
- Do not use rechargeable batteries.
- Do not expose batteries to excessive heat such as sunshine,
reorthelike,throwtheminare,rechargethemortrytoopen
them, as this could cause them to leak or explode.
- Remove the batteries from the remote control if you are not using
it for a long period of time.
- Attention should be drawn to the environmental aspects of battery
disposal.
2.
Connect the power cable FIRST to the television, THEN to a mains
socket. (
Note
:
If the power cable is connected to the television,
please only connect the power cable to the mains socket.
)
Your TV set should only be connected to an AC supply. It must
not be connected to a DC supply. If the plug is detached from the
cable, do not, under any circumstances, connect it to a mains
socket, as there is a risk of electric shock.
Note
:
The gures are for representation only, the location of power
socket of the television may differ depending on the model.
3.
Connect an outside aerial to the ANTENNA IN socket at the back
of the TV set.
The aerial socket (75 OHM - VHF / UHF / cable) can be used for
connectinganexternalaerialorotherequipmenttted.
Note
:
If you want to receive the signal from your cable or cable
box, please connect a coaxial cable to the CABLE IN socket at the
back of the TV set.
4.
When powered on, the TV will be turned on directly or be in
standby mode.
If the power indicator lights up, the TV set is in standby mode.
Press the button on the remote control or on the TV set to turn
on the TV.
Switching Off
• To put the TV set into standby mode, press the button on the
remote control. The TV set remains powered up, but with low
energy consumption.
• To switch off the TV set, unplug the mains socket from the mains
outlet.
7
Getting Started
Network Connection
Your TV will require an internet connection to operate all functions. Data usage charges may apply.
Please refer to your Internet Service Provider (ISP) for additional information.
To access the Internet, you must subscribe to high speed broadband Internet service with your Internet service
provider (ISP).
Your TV can be connected to your home network in two ways:
• Wired, using the RJ45 (LAN) connector on the back panel.
• Wireless, using the internal wireless and your home wireless network.
Note
:
Instructions below are just the usual ways to connect your TV to the wired or wireless network. The connection
method may be different depending on your actual network conguration. If you have any questions about your home
network, please refer to your ISP.
Connecting to a Wired Network
To connect to a wired network:
1.
Ensure you have:
• An Ethernet cable long enough to reach your TV
• A router or modem with an available Ethernet
port
• A high-speed Internet connection
• An Ethernet (LAN) port on the back of the TV
2.
Connect your Ethernet cable to the router and to
the Ethernet port on the back of the TV.
3.
Use the
Network
menu to configure the TV.
Connecting to a Wireless Network
To connect to a wireless network:
1.
Ensure you have:
• A router broadcasting a high-speed wireless
signal
• A high-speed Internet connection
2.
Use the
Network
menu to configure the TV.
Modem Internet
TV Set
Router
Ethernet
Port on the
back panel
Wireless Router
Modem
TV Set
Built-in wireless
connection
8
Getting Started
Network Settings
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or
wireless connection.
Connecting to a Wired Network
1.
Press
on the remote control, select
Network > Internet connection
and press
OK/►
to enter.
2.
Press
▲/▼
to select
On
and press
OK
toconrm.
3.
Press
▲/▼
to select
Interface
, then select
Ethernet
and press
OK
toconrm.
4.
Press
▲/▼
to select
IP settings
and press
OK/►
to enter. You can set
Address type
to
Auto
or
Manual
.
- Select
Auto
if you want the TV to acquire and enter the needed IP address automatically.
- Select
Manual
if you want to enter your IP address manually, then:
• Press
▼
togototherstentryeld.
• Enter the
IP Address
,
Subnet Mask
,
Default Gateway
,
Primary DNS
and
Secondary DNS
values. Use the
numeric buttons to enter numbers and the
▲/▼/◄/►
buttonstomovefromoneentryeldtoanother.
- Once
IP setting
is completed, press
▲/▼/◄/►
to select
OK
and press
OK
toconrm.Thesetwilltryto
connect to the network and inform you about the result. Press
to return to the
Network
menu.
Connecting to a Wireless Network
Your TV is equipped to be connected to your home network wirelessly. To do that you need a wireless router or
modem.
1.
Press
on the remote control, select
Network > Internet connection
and press
OK/►
to enter.
2.
Press
▲/▼
to select
On
and press
OK
toconrm.
3.
Press
▲/▼
to select
Interface
, then select
Wireless
and press
OK
toconrm.
4.
Press
▲/▼
to select
Wireless settings
and press
OK/►
to enter. You can set the wireless network connection in
3 ways:
-
a) Scan
• Press
▲/▼
to select
Scan
and press
OK/►
to enter. The TV will search all access points within range. Access
points found by the TV will be displayed.
• Press
▲/▼
to select an available access point, then press
OK/►
to connect.
• Press
to return to the
Wireless settings
menu.
Note: If you select a protected access point, you will have to enter the corresponding password. Press OK on the
remote control to display the virtual keyboard to enable you to enter the password.
-
b) Manual
Press
▲/▼
to select
Manual
and press
OK/►
to enter. You will be prompted to enter the correct SSID of an
available wireless router to set up the connection. Press
to return to the
Wireless settings
menu.
-
c) Auto
If your AP (Access Point) supports WPS (Wi-Fi Protected Setup), you can connect to the network via PIN
(PersonalIdenticationNumber)orPBC(PushButtonConguration).WPSwillautomaticallycongurethe
SSID and WPA key in either mode.
Press
▲/▼
to select
Auto
and press
OK/►
to enter.
•
PIN
: Select
PIN
and press
OK/►
to enter. Choose a random PIN code. Make sure this code is installed on the
AP. (For the procedures, refer to your router manual.) Select
OK
and press
OK
to set up the connection.
•
PBC
: If your router has a PBC push button, select
PBC
and press
OK/►
to enter. Press the PBC push button
on your router within 2 minutes before you select
OK
and press
OK
again. Your TV will automatically acquire
all the network setting values it needs and connect to your network.
• Press
to return to the
Wireless settings
menu.
- Press
to return to the
Network
menu.
5.
Press
EXIT
or to close the menu.
9
Getting Started
Initial Setup
Thersttimeyouswitchtheseton,the
Initial Setup
wizard opens, which guides you through the initial setup
process.Followtheon-screeninstructionstonishtheinitialsetupprocesssuchasselectingthelanguage,
connecting to the network, scanning channels, and more. During each step, either make a choice or skip the step.
If you skip a step, you can perform the setup later from the settings menu.
Note: If the channel search retrieved only the analogue channels it could be caused by poor broadcasting and
therefore is not covered by manufacturer warranty. Manufacturers cannot be held responsible for lack of or
poor broadcasting in some areas.
TV Buttons
If the batteries in your remote control are run down, you can use the buttons on your TV set. They have the
following functions:
For models with below buttons on the set: For models with below buttons on the set:
or
/◄
TV mode In menus
P ▲
or
/►
P ▼
►
or
Features (Short press)
(Long press)
◄
Features (Long press)
OK
(Short press)
Features (Long press)
OK
(Short press)
For models with only one button on the set:
Power on/Standby
Note
:
Figures and illustrations are provided for reference only and may vary depending on the model.
10
Chapter 3 Basic TV Operations
Accessing Channels
Using the numeric buttons
: press the corresponding
numeric buttons on the remote control to access the
channels.
Using the P / buttons
: press the
P /
buttons
on the remote control or the corresponding buttons on
the TV set to scroll through the channels.
Using the LIST button
: press the
LIST
button on the
remote control to display the channel list and press
▲/▼/◄/► and OK to select channels.
Watching Connected Devices
Press on the remote control to display the source
list. Press
▲/▼
to select TV or other input sources and
press
OK
toconrm.
You can also press on the remote control to display
the homepage, press
◄/►
to select
TV
and press
▲
to move to the source area, then press
▲/▼/◄/►
to
select your desired source and press
OK
toconrm.
Adjusting Volume
Volume control
: press the
/
buttons on the
remote control or the corresponding buttons on the TV
set to increase or decrease the volume.
Sound mute
: press the button to temporarily mute
the sound. Press this button again or the button to
restore the sound.
Accessing Smart TV Homepage
Allows you to enjoy Internet Applications (Apps) and
specially adapted Internet websites, and perform system
settings for your TV. You can make controlling with the
TV remote control.
WARNING:
• CongurethenetworksettingsbeforeusingSmart TV
applications.
• Slow responses and/or interruptions may occur,
depending on your network conditions.
• If you experience a problem using an application,
please contact the content provider.
• According to circumstances of the content provider, an
application’s updates or the application itself may be
discontinued.
• Depending on your country's regulations, some
applications may have limited service or not be
supported.
• Changes in application content may be made without
prior notice by the service provider.
1.
Press on the remote control to display the Smart
TV homepage.
2.
Press
▲/▼/◄/►
and
OK
to enter the desired Apps,
functions or settings.
3.
Press to return to the homepage.
4.
Press again to exit the homepage.
Note: Since the connection with Internet takes time,
it’s recommended that you wait a few minutes
to use the Smart TV feature after activation of
TV from standby.
Using TV Settings Menu
Allows you to adjust TV settings, such as picture and
sound.
1.
Press
on the remote control to display the Settings
menu.
2.
Press
▲/▼
to select the desired item, then press
OK/►
to enter the corresponding submenu.
3.
In submenus, press
▲/▼
to select menu options,
then press
OK/►
to enter the option list, the
adjustment interface, or the corresponding submenu.
4.
Press to return to the previous menu.
5.
Press
EXIT or
to close the menu.
Note: You can also press on the remote control,
select Settings (if available) and press OK to
enter the Settings menu. Some options may
not be available for certain signal sources.
11
Enabling Subtitle Languages on Digital TV
Channels
1.
Press
on the remote control, select
Channel >
Subtitle > Digital subtitle language
and press
OK/►
to enter.
2.
Press
▲/▼
to select a subtitle language as your
preferred language and press
OK
toconrm.
3.
Press
▲/▼
to select
Digital subtitle language 2nd
and press
OK/►
to enter.
4.
Press
▲/▼
to select a secondary subtitle language
and press
OK
toconrm.
5.
Press
EXIT
or to close the menu.
Shortcut operation:
Press
SUBT.
on the remote
control to directly select a subtitle language available for
the selected digital TV program.
Selecting a Subtitle Type on Digital TV
Channels
1.
Press
on the remote control, select
Channel >
Subtitle > Subtitle type
and press
OK/► to enter.
2.
Press▲/▼toselectasubtitletypeandpressOKto
conrm.Youcanselect
Hearing Impaired
to display
the hearing impaired subtitles with your selected
language.
3.
Press
EXIT
or to close the menu.
Using Teletext
Selecting Decoding Page Language
1.
Press
on the remote control, select
Channel >
Teletext > Decoding page language
and press
OK/►
to enter.
2.
Press
▲/▼
to select a proper type of language in
which Teletext will display and press
OK
toconrm.
3.
Press
EXIT
or to close the menu.
Digital Teletext Language
On digital TV channels, depending on the broadcaster,
you may be able to enjoy a service with multiple initial
Teletext pages in different languages. This function
allows you to select an available language as primary
language, which relates to different initial Teletext
pages.
1.
Press
on the remote control, select
Channel >
Teletext > Digital teletext language
and press
OK/►
to enter.
2.
Press
▲/▼
to select a language and press
OK
to
conrm.
3.
Press
EXIT
or to close the menu.
Installing Channels
This section describes how to search and store
channels automatically. This may be done in any of the
cases below:
-
you have skipped the channel installation step in the
initial setup;
-
you are prompted that there are no channels in TV
mode;
-
you want to update your channels.
1.
In TV mode, press
on the remote control and
select
Channel
>
Channel scan
. Press
OK
/►to
enter.
2.
The TV installs and arranges channels according
toyourcountry.Press▲/▼toselect
Country
, and
press
OK
/►toenter.Enterthedefaultpassword
1234 or your own password in case you have
changed the password in the
System
>
Lock
menu.
Press▲/▼toselectyourcountryandpress
OK
to
confirm.
3.
Press▲/▼toselect
Tuner mode
,
then press
▲/▼toselect
Cable
,
Antenna
or
Satellite
.
(Note: Satellite option is available only in selected
models.)
4.
Press▲/▼toselect
Automatic search
and press
OK
/►toenter.
5.
Press▲/▼toselectotheroptionstoconfigure.
6.
After configuration is completed, press
OK
to select
Search
and press
OK
to start scanning channels.
7.
The channel search may take a few minutes. After
the automatic search, channels are arranged in a
preset order. If you wish to hide or swap channels,
press
on the remote control, select
Channel
>
Channel organizer
and press
OK
/►toenter.
Using Subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via Teletext or DVB-T/DVB-C
digital broadcasts. With digital broadcasts, you have
the additional option of selecting a preferred subtitle
language.
Turning On/Off Subtitles
1.
Press
on the remote control, select
Channel >
Subtitle
and press
OK/►
to enter.
2.
Select the
Subtitle
option, press
▲/▼
to select
On
or
Off
and press
OK
toconrm.
3.
Press
EXIT
or to close the menu.
Chapter 4 Using More of Your TV
12
Using More of Your TV
Allows you to pause, fast forward and rewind live TV,
so you don’t have to miss any part of your favourite
programs. Before you use the function, connect a
USBdrivetotheTVrst.Forthersttime,youshould
complete the disk setup for the USB drive.
1.
Press on the remote control and select
Time
Shift
, then press
OK/►
to confirm.
2.
Follow the directions on the screen to do the disk
setup if you use time shift for the first time.
3.
After the disk setup is done, time shift will start, and
the time shift menu displays on the screen.
4.
For later use, press and select
Time Shift
. press
OK/►
to display the time shift menu and operate
according to the on-screen prompt.
5.
Pressing button stops the time shift and exits.
-
When the time shift menu disappears and only the
timing of the time shift remains on the screen, you
can press
/
/
/
to call out the time shift
menu.
Notes
:
- This feature is available only for digital channels.
- Before you plug the USB drive to TV, make sure
you have backed up the data on the drive to avoid
unforeseen malfunction and data loss.
- We recommend that you use a USB drive with at
least 1GB free space and a disk speed faster than
5.0MB/sec.
- The bigger the USB drive free space for time shift,
the bigger the recording length.
Quick Access of Time Shift
: Insert a USB disk, press
PAUSE( ) on the remote control, it will access Time
Shift automatically.
PVR
(Personal Video Recorder)
Allows you to record your favourite TV programs. Before
you use the function, connect a USB drive to the TV
rst.
Note
: The feature is available only in selected products
and, due to specic TV network limitations and country
technical requirements, might not be available in
product or place of installation. Feature might also be
blocked by TV network due to copyright protection (HD
content, recording protection). Please use on the
remote control to check if the feature is available in your
product.
1.
Press on the remote control and select
PVR
.
2.
Press
OK
/►toenterandselect
Record
. It starts to
record automatically.
3.
Press
BLUE
button on the remote control and use
▲/▼/◄/►toadjusttherecordingduration.
Network Wake Up
This function allows you to turn on your TV from standby
mode via a network. To use this function, please make
sure:
1.
Your TV is connected to an effective home network;
2.
The desired controller, such as a smartphone, is
connected to the same network as your TV;
3.
An App which supports network waking up function
has been installed into the controller;
4. Network standby
is set to
On
in the
Smart TV
menu.When the TV is in network standby mode, you
can use the App to wake up the TV remotely.
T-Link
Use this function to search for CEC devices connected
to the HDMI sockets in your TV and enable auto power
on and auto standby between the TV and CEC devices.
Enabling or Disabling T-Link
1.
Press
on the remote control, select
T-Link
and
press
OK/►
to enter.
2.
Press
▲/▼
to select
T-Link
and press
OK/►
to
enter.
3.
Press ◄/► to select
On
or
Off
and press
OK
to
conrm.
4.
Press
EXIT
to close the menu.
Using Auto Power On
Enables the TV to automatically power on when you
power on a CEC device (e.g. DVD) with the device’s
remote. Select
On
to enable this function.
Using Auto Standby
Enables all CEC devices to automatically go to the
standby mode when you turn off the TV with the TV
remote. Select On to enable this function.
Note: The CEC functions depend on the devices
connected and it is possible that some
devices may not interoperate correctly when
connected to this TV. The user manual or
the manufacturer of the problematic devices
should be consulted for further information.
Time Shift
Note: This Option is only available when Time Shift
is set to On: Select
Settings
>
Channel
>
Time Shift
,
press
OK
/► to enter and use ▲/▼ to set Time Shift to
On
or
Off
.
13
Using More of Your TV
▲/▼buttonsontheremotecontrol.
• Select one or more types, which you want to
highlight from the type list, press
OK
to select or
deselect. A checkmark will appear to the left of
the type when selected.
• Press►toselect
SubType
and press
OK
to
conrm.
-
Schedule list
: Press the yellow button to bring up
the
Schedule list
menu.
• Press the red button to add a schedule.
• Press the green button to delete a selected
schedule.
• Press
OK
to edit a selected schedule.
- Add schedule
: Press the
RED
button to set
theschedule.Usethe▲/▼buttonstochoose
Channel Number
,
Start
Date
,
Start Time
,
End
Time
,
Schedule type
, or
Repeat type
. then press
OK
to enter each item and set according to your
requirement.Thenuse▼buttontohighlight[
Add
schedule
], Press
OK
to add the selected program
into your schedule list.
3.
Press
GUIDE
or
EXIT
to exit EPG.
Share&See
Note: Share&See
is DLNA-compatible.
Connecting to Your PC
Make sure to set up a wired or wireless connection from
yourTVtoarouterrst.ThenconnectyourPCtoyour
router either through a network cable or wirelessly. Also
make sure to select
Network > Internet connection
and select
On
,andthatyourcomputerrewallwon’t
block the connection.
Enabling Share&See Function
Press
on the remote control, select
Smart TV >
Share&See
and press
OK/►
to enter. Press
▲/▼
to
select
On
and press
OK
toconrm. Follow the steps in
turnspeciedhereafter,thenyoucanenjoyrecorded
videos, images and music saved on your PC.
Adding Media from Your PC for Sharing
Install a DLNA media server on your PC. The simple
and familiar server you may install is Microsoft Windows
Media Player 11 and above. Set your media server to
allowyourTVtoaccessthedesignatedlesonyour
PC.
Share&See Application
Select
Media
from the homepage and press
OK
to
enter. Then you can view pictures, listen to music or
watch videos, which are stored on your PC.
Supportedleformats:
Picture JPEG, PNG, BMP
Music MP3, WMA, LPCM
4.
Press
to stop recording manually, the recorded
file will be saved. In normal operation, the recording
will stop automatically when the recording duration
expires.
5.
In recording, the PVR mini pane will also show on
the screen to indicate the recording progress.
6.
To watch the recorded program, exit PVR mode first,
Press
and select
PVR > PVR list
, or
press
and go to
TV > Media > PVR
, then select the related
record file. Press
OK
to play. (It is the same if you
record a digital radio program).
Notes
:
- This feature is available only for digital non-
encrypted channels. Even when CICAM (CI or CI+)
is inserted, this feature is not available on encrypted
channels.
- Before you connect the USB drive to the TV, make
sure you have backed up the data in the drive
to avoid the loss of your important data due to
unforeseen malfunction.
- The bigger the USB drive free memory for the PVR
function, the bigger the recording length.
- If you want to change channel or signal source
during recording, store the recording data before
changing the channel or source.
- The TV cannot play files normally if the parameters
of the file exceed the limitations of the system, the
file format is not supported, the file is damaged, or
the file cannot be decoded.
- Do not disconnect the USB drive when the system
is reading a file or transmitting data, otherwise the
system or the drive may be damaged.
Using EPG
(Electronic Program Guide)
EPG is an on-screen guide that displays scheduled
digital TV programs. You can navigate, select and view
programs.
1.
Press
GUIDE
on the remote control, the
Program
Guide
menu will appear, which allows you to get
information about the current or next program
playing on each channel. Navigate through the
differentprogramsusingthe▲/▼/◄/►buttonson
the remote control.
2.
Use the related buttons shown at the bottom of the
screen to view EPG.
-
Prev day
: Press
to display EPG of the previous
day.
-
Next day
: Press
to display EPG of the next
day.
- Filter
:ProgramguidelterfordigitalTVprograms.
• Press to display the type list of the program.
• Navigate through the different types using the
14
Using More of Your TV
3.
Press
EXIT
or to close the menu.
Note: This function increases standby power
consumption.
Password in Parental Control
-
The default password is 1234. You can change it to a
new one.
-
The super password is 0423. If you forget your code,
enter the super password to override any existing
codes.
Video FLV, TS, MP4
Notes:
-
If Share&See is switched on, the TV will display
the list of available DLNA servers which are
available in local network.
-
Content from third-party DLNA servers may not
play correctly on your TV due to compatibility
problems.
-
When sharing media les from a PC, certain
features may be unavailable and, due to the le
and encoding formats used, playback issues may
occur.
-
Because of network related conditions, playback
of media les may not be error-free. When this
happens, play them from a USB drive.
WiFi Display
(*not available for some models)
WiFi display allows you to share screen and sound
of your device such as a smartphone or a tablet to
your TV, wirelessly (i.e. without cables). This makes
it possible to view on your TV, at the same time, what
your smartphone or tablet is showing. For example, you
can launch a video on your smartphone and display it
simultaneously on your TV, or use your tablet as game
controller with content displayed on the big screen of
your TV.
WheneveryouwanttouseWiFidisplay,youmustrst
activate this function in your TV. To do it follow the steps
below:
1.
Press
on the remote control, select
Smart TV >
WiFi display
and press
OK
to enter. You will see
details for this function.
2.
Find the WiFi display function in your device.
Different devices may have different names for this
function.
3.
Then click the “connection” function on the device.
If connected successfully, you will see on your TV
screen what the device is showing.
Note: Does not guarantee that the use of the WiFi
display function will be smooth or error-free
since not all devices are compatible with the
WiFi display function.
Using Instant Power On
It enables you to turn on your TV within 5 seconds from
standby mode.
1.
Press
on the remote control, select
System >
Instant power on
and press
OK/►
to enter.
2.
Press
▲/▼
to select
On
and press
OK/►
toconrm.
15
Chapter 5 Other Information
Problems & Solutions
Note
:
Problems & solutions 1 to 2 are for the TV models which have network functions, so users of non-connected
TV models can disregard them.
6. Video stops playing midway.
-
Mistakes may occur when videos are copied or
compressed, so they may automatically stop playing
during playback.
7. What should I pay attention to, when I do SW
updating?
-
No power cuts when SW updating;
-
Avoid any operations with your remote control when
SW updating;
-
Depending on your internet connection speed, the
software updating process may take some time.
8. There
are no distinct changes of TV interface
after SW updating.
-
Under certain conditions, SW updating may not only
update or add new functions but also improve the
performance of the TV set, without distinct changes
to the user interface. Also, there may be no changes
to the user interface at all.
9. External device cannot be recognized.
-
Some external devices (e.g. webcam, smart phone,
tablet, game handle, and external wireless adapter)
may not be compatible with the TV and cannot be
supported for certain functions (nScreen, wireless
display, gesture control, face recognition, if any).
Please try a similar device. If it does not work,
contact your local dealer.
1. Fail to link to the network.
-
Check if your TV is connected with the network;
-
Reboot your TV;
-
Consultyourinternetserviceprovider,toconrm
if access of your router is supported. Refer to the
operation manual of your router.
-
Make sure your TV is connected to a router, and
make sure your router is powered on. Check that
your router/modem has an internet connection, and
that your Ethernet cables/wireless connection is OK.
Test your connection with a computer to make sure it
is OK. Should the problem persist, contact customer
service.
2. The video could not be played smoothly.
-
VideosfromyourUSBashdrive---Itmayresult
fromdatatransmission,oritscodeowisfarbeyond
the supported formats of this TV set.
-
Videos downloaded from internet, or online videos.
a. It may be caused by the lower bandwidth of your
network. A high network speed is required to
handle online videos.
b. Peak internet usage times may affect the
bandwidth.
c. Check if any other computers on the same
network are also operating, as they may be using
up bandwidth. Especially if they are downloading
or playing on-line videos.
d. The video may not be smooth itself, it is not the
problem of your TV or network.
3. When two mobile hard disks are connected
with the TV at the same time, they will not be
recognized some times.
-
All mobile hard disks consume a lot of power,
which may result in power supply problems. We
recommend inserting only one hard disk, or a low
power consumption mobile hard disk.
4. The video from a mobile hard disk (USB) is
playing with no sound.
-
The audio format of the video in your mobile hard
disk is not supported by the TV player.
5. Some videos fail to play.
-
The formats of the videos may not be supported
by the TV, especially videos shot by certain kinds
of cameras, generally with their private protocol of
formats, which are not compatible with your TV.
16
Other Information
Troubleshooting
Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list.
Snowy dots and interference
If the antenna is located in the fringe area of a television
signal where the signal is weak, the picture may be
marred by dots. When the signal is extremely weak,
it may be necessary to install a special antenna to
improve the reception.
1.
Adjust the position and orientation of the indoor/
outdoor antenna.
2.
Check the connection of antenna.
3.
Fine tune the channel.
4.
Try another channel. Broadcasting failure may
happen.
Ignition
Black spots or horizontal streaks appear, or the picture
uttersordrifts.Thisisusuallycausedbyinterference
from car ignition system, neon lamps, electric drills, or
other electrical appliance.
Ghost
Ghosts are caused by the television signal following
twopaths.Oneisthedirectpath,theotherisreected
from tall buildings, hills, or other objects. Changing the
direction or position of the antenna may improve the
reception.
Radio frequency interference
This interference produces moving ripples or diagonal
streaks, and in some case, loss of contrast in the
picture. Find out and remove the radio interference
source.
* To bring you better visual experience, please remove
all labels from TV front panel and screen before use.
No picture, no sound
1.
Check if the fuse or circuit breaker is working.
2.
Plug another electrical device into the outlet to make
sure it is working or turned on.
3.
Power plug is in a bad contact with the outlet.
4.
Check the signal source.
No color
1.
Change the color system.
2.
Adjust the saturation.
3.
Try another channel. Black-white program may be
received.
Remote control does not work
1.
Change the batteries.
2.
Batteries are not installed correctly.
No picture, normal sound
1.
Adjust the brightness and contrast.
2.
Broadcasting failure may happen.
Normal picture, no sound
1.
Press the
VOLUME UP
button to increase volume.
2.
Volume is set to mute, press the
MUTE
button to
restore sound.
3.
Change the sound system.
4.
Broadcasting failure may happen.
Unorderly ripples on the picture
It is usually caused by local interference, such as cars,
daylight lamps and hair driers. Adjust the antenna to
minimize the interference.
17
Other Information
Legal Statement
[LegalStatement]ofmanufacturerofthisTVset
Due to the various capabilities of products featuring
the SmartTV - Services, as well as limitations in the
available content, certain features, applications, and
services may not be available on all devices or in all
territories. Some features on SmartTV may also require
additional peripheral devices or membership fees that
are sold separately. Please visit our website for more
informationonspecicdeviceinformationandcontent
availability. The services and availability of content
through SmartTV are subject to change from time to
time without prior notice.
All content and services accessible through this device
belong to third parties and are protected by copyright,
patent, trademark and/or other intellectual property
laws. Such content and services are provided solely
for your personal noncommercial use. You may not
use any content or services in a manner that has
not been authorized by the content owner or service
provider. Without limiting the foregoing, unless expressly
authorized by the applicable content owner or service
provider, you may not modify, copy, republish, upload,
post, transmit, translate, sell, create derivative works,
exploit, or distribute in any manner or medium any
content or services displayed through this device.
You expressly acknowledge and agree that use of the
device is at your sole risk and that the entire risk as to
satisfactory quality, performance and accuracy is with
you. The device and all third party content and services
are provided “as is” without warranty of any kind, either
express or implied. Manufacturer expressly disclaims all
warranties and conditions with respect to the device and
any content and services, either express or, implied,
including but not limited to, warranties of merchantability,
ofsatisfactoryquality,tnessforaparticularpurpose,of
accuracy, of quiet enjoyment, and non-infringement of
third party rights. Manufacturer does not guarantee the
accuracy, validity, timeliness, legality, or completeness
of any content or service made available through this
device and does not warrant that the device, content or
services will meet your requirements, or that operation
of the device or services will be uninterrupted or error-
free. Under no circumstances, including negligence,
shall manufacturer be liable, whether in contract
or tort, for any direct, indirect, incidental, special or
consequential damages, attorney fees, expenses, or
any other damages arising out of, or in connection with,
any information contained in, or as a result of the use of
the device, or any content or service accessed by you or
any third party, even if advised of the possibility of such
damages.
Third party services may be changed, suspended,
removed, terminated or interrupted, or access may be
disabled at any time, without notice, and manufacturer
makes no representation or warranty that any content
or service will remain available for any period of time.
Content and services are transmitted by third parties
by means of networks and transmission facilities over
which manufacturer has no control. Without limiting the
generality of this disclaimer, manufacturer expressly
disclaims any responsibility or liability for any change,
interruption, disabling, removal of or suspension of any
content or service made available through this device.
Manufacturer may impose limits on the use of or access
to certain services or content, in any case and without
notice or liability. Manufacturer is neither responsible nor
liable for customer service related to the content and
services. Any question or request for service relating to
the content or services should be made directly to the
respective content and service providers.
18
* Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. Product design and specications may be changed without notice.
ThetermsHDMIandHDMIHigh-DenitionMultimedia
Interface, and the HDMI logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. in the
United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby,
Dolby Audio, and the double-D symbol are trademarks of
Dolby Laboratories.
This symbol indicates that the product and its electronic accessories should not be disposed of as
general household waste at their end-of-life. Instead, the products should be handed over to the
applicable collection points for the recycling of electrical and electronic equipment. By disposing
of these products correctly, you will help to conserve natural resources and will help to prevent
potential negative effects on the environment and human health which could otherwise be caused by
inappropriate waste handling of these products.
For more information about collection points and recycling of these products, please contact your
local municipal ofce, your household waste disposal service or the shop where you purchased the
product.
72-NT63DT-EAP1C
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

TCL 43P20FS User guide

TCL
Brand
TCL
Model
43P20FS
Category
LED TVs
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents