Draper Variable Speed Mini Milling/Drilling Machine Operating instructions

Draper
Brand
Draper
Model
Variable Speed Mini Milling/Drilling Machine
Category
Power tools
Type
Operating instructions

This manual is also suitable for

Draper Variable Speed Mini Milling/Drilling Machine

The DRAPER 230V MILLING MACHINE allows you to perform face milling and boring operations intended to shape cold metal using a rotating cutting tool. It has a drilling capacity of 13mm, an end milling capacity of 16mm and a spindle taper of MT3. The headstock travel is 180mm, and the table dimensions are 390 x 92mm.

It has a number of features that make it a versatile and easy-to-use machine:

  • Variable speed control allows you to match the speed of the machine to the material you are working with.
  • The headstock can be tilted up to 45 degrees, giving you the flexibility to make angled cuts.

Draper Variable Speed Mini Milling/Drilling Machine

The DRAPER 230V MILLING MACHINE allows you to perform face milling and boring operations intended to shape cold metal using a rotating cutting tool. It has a drilling capacity of 13mm, an end milling capacity of 16mm and a spindle taper of MT3. The headstock travel is 180mm, and the table dimensions are 390 x 92mm.

It has a number of features that make it a versatile and easy-to-use machine:

  • Variable speed control allows you to match the speed of the machine to the material you are working with.
  • The headstock can be tilted up to 45 degrees, giving you the flexibility to make angled cuts.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Draper Variable Speed Mini Milling/Drilling Machine Operating instructions

Draper
Brand
Draper
Model
Variable Speed Mini Milling/Drilling Machine
Category
Power tools
Type
Operating instructions
This manual is also suitable for

Draper Variable Speed Mini Milling/Drilling Machine

The DRAPER 230V MILLING MACHINE allows you to perform face milling and boring operations intended to shape cold metal using a rotating cutting tool. It has a drilling capacity of 13mm, an end milling capacity of 16mm and a spindle taper of MT3. The headstock travel is 180mm, and the table dimensions are 390 x 92mm.

It has a number of features that make it a versatile and easy-to-use machine:

  • Variable speed control allows you to match the speed of the machine to the material you are working with.
  • The headstock can be tilted up to 45 degrees, giving you the flexibility to make angled cuts.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents