Chauvet RDMX Splitter 8 Reference guide

Page is loading ...

1

EN

QUICK REFERENCE GUIDE

RDMX Splitter 8 QRG Rev. 2

About This Guide

The RDMX Splitter 8 Quick Reference Guide (QRG) has basic product information such as connection, mounting, menu

options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.

For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration

.

For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and

Germany: www.chauvetlighting.eu/warranty-registration

.

Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the

period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This

warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this

warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows

the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This

warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to

country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,

Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.

Safety Notes

These Safety Notes include important information about installation, use, and maintenance.

Contact

Outside the U.S., United Kingdom, Ireland, Mexico, France, Germany, or Benelux, contact your distributor to request

support or return a product. From inside the U.S., UK, Ireland, Mexico, France, Germany, or Benelux, use the information

in Contact Us

at the end of this QRG.

What is Included

• RDMX Splitter 8

• Neutrik® powerCON® power cord

• Quick Reference Guide

• ONLY connect this product to a grounded and protected circuit.

• DISCONNECT from power before cleaning or replacing the fuse.

• DO NOT look at the light source when the product is on.

• Make sure the power cord is not crimped or damaged.

• Never disconnect this product from power by pulling on the cord.

• When mounting this product overhead, ALWAYS use a safety cable.

• DO NOT allow flammable materials close to the product when it is operating.

• DO NOT touch the product’s housing when it is on because it will be hot.

• The voltage of the outlet to which you are connecting this product must be within the range stated on the

decal or rear panel of the product.

• This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose this product to rain

or moisture.

• Always mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent

surfaces.

• Be sure that no ventilation slots on the unit’s housing are blocked.

• Never connect this product to a dimmer or rheostat.

• Replace the fuse with the same type and rating.

• Never carry the product by the power cord. Use only the hanging bracket or handle to carry this product.

• The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher temperatures.

• In the event of a serious operating problem, stop using immediately.

• DO NOT open this product. It contains no user-serviceable parts.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect

the product from power via breaker or by unplugging it.

EN

2

RDMX Splitter 8 QRG Rev. 2

QUICK REFERENCE GUIDE

AC Power

This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.

Power Linking

The maximum output current from the RDMX Splitter 8 is 15A. See the User Manual or the specification sticker on the

product for more details.

AC Plug

DMX Linking

The RDMX Splitter 8 will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is available from

www.chauvetprofessional.com.

Mounting

Before mounting this product, read the Safety Notes. Use at least one mounting point per product. Make sure the

mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to

http://trusst.com/productcategory/truss-clamps/

Product Mounting Diagram

Front Panel Description

Connection Wire (U.S.) Wire (Europe) Screw Color

AC live Black Brown Yellow/brass

AC neutral White Blue Silver

AC ground Green/yellow Green/yellow Green

To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely

disconnect the product from power via breaker or by unplugging it.

!

Safety cable

Mounting clamp

POWER

SIGNAL

A B 1 8765432

1X8 MODE

2X4 MODE

Mode button

3

EN

QUICK REFERENCE GUIDE

RDMX Splitter 8 QRG Rev. 2

Technical Specifications

Dimensions and Weight

Note: Dimensions in inches are rounded.

Power

Thermal

DMX

Ordering

Panel Item Function

<POWER> indicator Illuminates when power has been applied to the product

Input <A> DMX Input port A. Indicator light will illuminate when input signal is being received.

Input <B> DMX Input port B. Indicator light will illuminate when input signal is being received.

Mode button

Selects 1x8 Mode or 2x4 Mode:

• 1x8 Mode sends the DMX signal received from input port A to all 8 signal

output ports.

• 2x4 Mode sends the DMX signal received from input port A into signal

output ports 1 to 4 and from port B into signal output ports 5 to 8.

Signal output <1> to <8>

DMX Output ports 1 to 8. Indicator lights on each port will illuminate when a signal

is being output through the port.

To use the RDMX Splitter 8 as a switch between 2 different input sources, plug the DMX Input lines

into Signal Output Ports 5 to 8. Use the Mode button to switch between sources.

LENGTH WIDTH HEIGHT WEIGHT

19 in (483 mm) 5.75 in (146 mm) 1.77 in (45 mm) 4.2 lb (1.9 kg)

POWER SUPPLY TYPE RANGE VOLTAGE SELECTION

Switching (internal) 100 to 240 VAC, 50/60 Hz Auto-ranging

PARAMETER 120 V, 60 HZ 208 V, 60 HZ 230 V, 50 HZ

Consumption 11 W 14 W 14 W

Operating current 0.09 A 0.06 A 0.06 A

POWER I/O U.S./WORLDWIDE UK/EUROPE

Power input connector Neutrik® powerCON® Neutrik® powerCON®

Power output connector Neutrik® powerCON® Neutrik® powerCON®

Power cord plug Edison (U.S.) Local plug

MAXIMUM EXTERNAL TEMPERATURE COOLING SYSTEM

113 °F (45 °C)

DEVICE DATA INPUTS DEVICE DATA OUTPUTS

5-pin XLR (2 total) 5-pin XLR (8 total)

PRODUCT NAME ITEM NAME ITEM CODE UPC NUMBER

RDMX Splitter 8

RDMXSPLITTER8

09081463 781462218119

Page is loading ...

Multi-Language

QUICK REFERENCE GUIDE

19

RDMX Splitter 8 QRG Rev. 2

Contact Us

Visit the applicable website above to verify our contact information and instructions to request support. Outside the

U.S., United Kingdom, Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record.

General Information Technical Support

World Headquarters

Address: 5200 NW 108th Ave. Voice: (844) 393-7575

Sunrise, FL 33351 Fax: (954) 756-8015

Voice: (954) 577-4455 Email: chauvetcs@chauvetlighting.com

Fax: (954) 929-5560

Toll Free: (800) 762-1084 Website: www.chauvetprofessional.com

UK

Address: Unit 1C Email: UKtech@chauvetlighting.eu

Brookhill Road Industrial Estate

Pinxton, Nottingham, UK Website: www.chauvetprofessional.eu

NG16 6NT

Voice: +44 (0) 1773 511115

Fax: +44 (0) 1773 511110

Benelux

Address: Stokstraat 18 Email: BNLtec[email protected]

9770 Kruishoutem

Belgium Website: www.chauvetprofessional.eu

Voice: +32 9 388 93 97

France

Address: 3, Rue Ampère

91380 Chilly-Mazarin

Email: FRtech@chauvetlighting.fr

France Website: www.chauvetprofessional.eu

Voice: +33 1 78 85 33 59

Germany

Address: Bruno-Bürgel-Str. 11

28759 Bremen

Email: DEtech@chauvetlighting.de

Germany Website: www.chauvetprofessional.eu

Voice: +49 421 62 60 20

Mexico

Address: Av. de las Partidas 34 - 3B

(Entrance by Calle 2)

Email: [email protected]

Zona Industrial Lerma Website: www.chauvetprofessional.mx

Lerma, Edo. de México, CP 52000

Voice: +52 (728) 690-2010

Chauvet RDMX Splitter 8 Reference guide

This manual is also suitable for

Chauvet RDMX Splitter 8 Reference guide

in other languages

Related papers

Other documents