Kawai CA97 Owner's manual

CA97
Kawai
Brand
Kawai
Model
CA97
Category
MIDI keyboards
Type
Owner's manual
1
MIDI Settings
MIDI Overview
The term MIDI is an acronym for Musical Instrument Digital Interface, an international standard for connecting
musical instruments, computers, and other devices to allow the exchange of performance data.
MIDI Terminals
MIDI terminal Function
MIDI IN Receiving note, program change, and other data.
MIDI OUT Sending note, program change, and other data.
MIDI channels
MIDI uses channels to exchange data back and forth between MIDI devices. There are receive (MIDI IN) and transmit (MIDI OUT)
channels. Most musical instruments or devices with MIDI functions are equipped with both MIDI IN and OUT jacks and are capable of
transmitting and receiving data via MIDI. The receive channels are used to receive data from another MIDI device, and the transmit
channels are used to transmit data to another MIDI device.
The illustration below shows three musical instruments, connected together using MIDI.
Transmitting instrument a Receiving instrument b Receiving instrument c
Transmitting instrument a sends transmit channel and keyboard information to receiving instruments b/c.
The information arrives at the receiving instruments b/c.
Receiving instruments b/c will respond to MIDI data that is sent if their receive channel is the same as the transmit channel of the
transmitting instrument a. If the channels do not match, the receiving instruments b/c will not respond to any data that is sent.
For both receiving and transmitting, channels 1-16 can be used.
Recording/playing with a sequencer
When connected to a sequencer (or a computer running MIDI
sequencing software), the DG30 digital piano can be used to
record and playback multi-track songs, with separate sounds
playing simultaneously on each channel.
Sequencer
DG30 MIDI Settings Manual
2
MIDI Settings
MIDI Functions
The DG30 digital piano supports the following MIDI functions:
Transmit/receive note information
Transmit/receive note information to/from a MIDI-connected
musical instrument or device.
Transmit/receive program change information
Transmit/receive program change data to/from a MIDI-
connected musical instrument or device.
Transmit/receive channel settings
Specify transmit/receive channels within the range of 1 to 16.
Transmit/receive pedal data
Transmit/receive sustain, sostenuto, and soft pedal data to/
from a MIDI-connected musical instrument or device.
Transmit/receive exclusive data
Transmit/receive front panel or menu function settings as
exclusive data.
Receive volume data
Receive MIDI volume data sent from a MIDI-connected
musical instrument or device.
Multi-timbral mode setting
Receive multiple channel MIDI data from a MIDI-connected
musical instrument or device.
* Please refer to the ‘MIDI Implementation Chart’ on page 19 for further
inform
ation regarding the MIDI capabilities of the DG30 digital piano.
MIDI Settings
No. Setting Description Default setting
1 MIDI Channel Specify the channel that is used to transmit/receive MIDI information. 1
2 Send PGM Change # Send a MIDI program change number from 1 to 128. 1
3 Local Control Specify whether internal sounds will be heard when the keyboard is pressed. On
4 Trans. PGM Change Specify whether program change data is sent when sounds are changed. On
5 Multi-timbral Mode Specify whether the instrument can receive Multi-timbral MIDI information. O
6 Channel Mute Specify which channels (1-16) are activated to receive MIDI information. Play All
* Default settings will be shown in the rst LCD display illustration (i.e. Step 1) for each setting explanation below.
Entering the MIDI Settings menu
While the normal playing mode screen is shown in the LCD display:
Press the
FUNCTION button (MENU).
The Function menus will be shown in the LCD display.
Press the
or
buttons to select the MIDI Settings menu.
Press the FUNCTION button (ENTER) again to enter the MIDI
Settings menu.
Selecting and adjusting the desired setting
After entering the MIDI Settings menu:
Press the
or
buttons to move the selection cursor over the
desired setting.
Press the
or
buttons to adjust the selected setting.
* To reset the current setting to the default value, press the
and
buttons simultaneously.
DG30 MIDI Settings Manual
3
MIDI Settings
1
MIDI Channel
The MIDI Channel setting allows the transmit/receive channel to be specied. The selected channel will function as
both the transmit and receive channel (separate transmit/receive channels cannot be specied).
1. Selecting the MIDI Channel setting
After entering the MIDI Settings menu (page 2):
Press the
or
buttons to select the MIDI Channel setting.
2. Changing the MIDI Channel value
Press the
or
buttons to increase or decrease the value of
the MIDI Channel setting.
* The MIDI Channel value can be adjusted within the range of 1~16.
* To
reset the MIDI Channel setting to the default value, press the
and
buttons simultaneously.
* Any changes made to the MIDI Channel setting will remain until the
power is turned off.
* Preferred MIDI Channel settings can be stored to a Registration
Memory for convenient recall, or to the Startup Setting memory for
automatic selection when the instrument is turned on. Please refer to
DG30 Owner’s Manual pages 35 and 79 for more information.
3. Exiting the MIDI Channel setting
Press the FUNCTION button (BACK) to exit the MIDI Channel
setting and return to the Function Menus screen.
Omni mode
When the DG30 digital piano is turned on, the instrument is automatically set to ‘omni mode on’, allowing MIDI information to be
received on all MIDI channels (1~16). When the MIDI Channel setting is used to specify a transmit/receive channel, the instrument
will be set to ‘omni mode off’.
Multi-timbral mode and Split/Dual modes
Using Split mode with Multi-timbral mode enabled
Notes played in the lower section of the keyboard will be
transmitted on the channel that is 1 channel higher than the
specied channel. For example, if the MIDI channel is set to
3, notes played in the lower section of the keyboard will be
transmitted on channel 4.
Using Dual mode with Multi-timbral mode enabled
Notes played will be transmitted on two channels: the
specied channel and the channel that is 1 channel higher.
For example, if the MIDI channel is set to 3, notes played on
the keyboard will be transmitted on channels 3 and 4.
* If the specied MIDI channel is 16, the lower section / layered part will be transmitted on channel 1.
DG30 MIDI Settings Manual
4
MIDI Settings
2
Send Program Change Number
The Send Program Change Number function is used to send a Program Change Number (1-128) to the connected
MIDI device.
1. Selecting the Send Program Change Number function
After entering the MIDI Settings menu (page 2):
Press the
or
buttons to select the Send Program Change
Number function.
2. Specifying and transmitting a Program Change Number
Press the
or
buttons to decrease or increase the Program
Change Number.
* The program change number can be set within the range of 1~128.
Press the FUNCTION button (SEND) to send the specied
Program Change Number.
3. Exiting the Send Program Change Number function
Press the FUNCTION button (BACK) to exit the Send Program
Change Number function and return to the Function Menus
screen.
DG30 MIDI Settings Manual
5
MIDI Settings
3
Local Control
The Local Control setting determines whether the instrument will play an internal sound when the keys are pressed.
This setting may be useful when using the DG30 digital piano to control an external MIDI device that is
connected to the instrument’s amplifier/speakers.
Local C
ontrol setting
Local Control Description
O The instrument will transmit information to an external MIDI device only.
On
(default) The instrument will play an internal sound and transmit information to an external MIDI device.
1. Selecting the Local Control setting
After entering the MIDI Settings menu (page 2):
Press the
or
buttons to select the Local Control setting.
2. Changing the Local Control setting
Press the
or
buttons to turn the Local Control setting on
or o.
* To reset the Local Control setting to the default setting, press the
and
buttons simultaneously.
* Any changes made to the Local Control setting will remain until the
power is turned off.
* Preferred Local Control settings can be stored to a Registration
Memory for convenient recall, or to the Startup Setting memory for
automatic selection when the instrument is turned on. Please refer to
DG30 Owner’s Manual pages 35 and 79 for more information.
3. Exiting the Local Control setting
Press the FUNCTION button (BACK) to exit the Local Control
setting and return to the Function Menus screen.
DG30 MIDI Settings Manual
6
MIDI Settings
4
Transmit Program Change Numbers
The Transmit Program Change Numbers setting determines whether the DG30 digital
piano will transmit
program change information via MIDI when the instrument’s panel buttons are pressed.
Transmit Program Change Numbers setting
Transmit PGM# Multi-timbral setting Eect of pressing panel buttons
On (default) O, On1 SOUND buttons will send PGM# shown in the left column*.
On On2 SOUND buttons will send PGM# shown in the right column*.
O O Program Change information will not be transmitted via MIDI.
* Please refer to the ‘Program Change Number List’ on page 9.
1. Selecting the Transmit Program Change Numbers setting
After entering the MIDI Settings menu (page 2):
Press the
or
buttons to select the Transmit Program Change
Numbers setting.
2. Changing the Transmit Program Change Numbers setting
Press the
or
buttons to turn the Transmit Program Change
Numbers setting on or o.
* To
reset the Transmit Program Change Numbers setting to the default
setting, press the
and
buttons simultaneously.
* Any changes made to the Transmit Program Change Numbers setting
will remain until the power is turned off.
* Preferred Transmit Program Change Numbers settings can be stored
to a Registration Memory for convenient recall, or to the Startup
Setting memory for automatic selection when the instrument is
turned on. Please refer to DG30 Owner’s Manual pages 35 and
79 for more information.
3. Exiting the Transmit Program Change Numbers setting
Press the FUNCTION button (BACK) to exit the Transmit
Program Change Numbers setting and return to the Function
Menus screen.
Omni mode
Program change numbers will also be transmitted when
Multi-timbral mode is set to On1 or On2.
When using Dual or Split mode, On/O information and
sound type settings for are transmitted as exclusive data,
however program change numbers will not be transmitted.
DG30 MIDI Settings Manual
7
MIDI Settings
5
Multi-timbral Mode
The Multi-timbral Mode setting determines whether or not the DG30
digital piano is able to receive MIDI
information on more than one MIDI channel simultaneously. This allows the instrument to play back multi-track,
multi-timbral performance data sent from an external MIDI device.
Multi-timbral Mode setting
Multi-timbral Mode Selected sound
O (default) The sound shown in the left column is selected*.
On1 The sound shown in the left column is selected*.
On2 The sound shown in the right column is selected*.
* Please refer to the ‘Program Change Number List’ on page 9.
1. Selecting the Multi-timbral Mode setting
After entering the MIDI Settings menu (page 2):
Press the
or
buttons to select the Multi-timbral Mode
setting.
2. Changing the Multi-timbral Mode setting
Press the
or
buttons to change turn the Multi-timbral
Mode setting.
* To
reset the Multi-timbral Mode setting to the default setting, press
the
and
buttons simultaneously.
* Any changes made to the Multi-timbral Mode setting will remain until
the power is turned off.
* Preferred Multi-timbral Mode settings can be stored to a Registration
Memory for convenient recall, or to the Startup Setting memory for
automatic selection when the instrument is turned on. Please refer to
DG30 Owner’s Manual pages 35 and 79 for more information.
3. Exiting the Multi-timbral Mode setting
Press the FUNCTION button (BACK) to exit the Multi-timbral
Mode setting and return to the Function Menus screen.
DG30 MIDI Settings Manual
8
MIDI Settings
6
Channel Mute
The Channel Mute setting determines which MIDI channels (1-16) are activated to receive MIDI information when
Multi-timbral mode is enabled.
* This setting is only available when the Multi-timbral Mode setting is set to ‘On1’ or ‘On2’.
1. Selecting the Channel Mute setting
After entering the MIDI Settings menu (page 2):
Press the
or
buttons to select the Channel Mute setting.
Press the
FUNCTION button (EDIT).
The Channel Mute selection screen will be shown in the LCD
display.
2. Selecting and playing/muting channels
Press the
or
buttons to select the desired MIDI channel.
Press the
or
buttons to alternate between ‘Play’ and ‘Mute’
states.
* To
reset the Channel Mute setting to the default value, press the
and
buttons simultaneously.
* Any changes made to the Channel Mute setting will remain until the
power is turned off.
* Preferred Channel Mute settings can be stored to a Registration
Memory for convenient recall, or to the Startup Setting memory for
automatic selection when the instrument is turned on. Please refer to
DG30 Owner’s Manual pages 35 and 79 for more information.
3. Exiting the Channel Mute function
Press the FUNCTION button (BACK) to exit the Channel Mute
adjustment screen and return to the MIDI Settings menu.
DG30 MIDI Settings Manual
9
Program Change Number List
Sound Name
Multi-timbral mode = o/on1 Multi-timbral mode = on2
Bank LSB Program Number Bank MSB Bank LSB Program Number
PIANO1
SK ConcertGrand 0 1 121 0 1
EX ConcertGrand 0 2 95 27 1
SK-5 GrandPiano 0 3 95 30 1
Studio Grand 0 4 121 1 1
Studio Grand 2 0 5 95 28 1
Mellow Grand 0 6 121 2 1
Mellow Grand 2 0 7 95 29 1
PIANO2
Upright Piano 0 8 95 25 1
Standard Grand 0 9 95 16 1
Pop Grand 0 10 95 31 1
Upright Piano 2 0 11 95 26 1
Modern Piano 0 12 121 0 2
Upright Piano 3 0 13 95 34 1
Honky Tonk 0 14 121 0 4
E.PIANO
Classic E.Piano 0 15 121 0 5
60 ’s E. P. 0 16 121 3 5
Mo de r n E .P. 0 17 121 0 6
Electric Grand 0 18 121 0 3
Classic E.P. 2 0 19 95 3 5
Classic E.P. 3 0 20 95 5 5
Modern E.P. 2 0 21 95 6 6
ORGAN
Jazz Organ 0 22 121 0 18
Blues Organ 0 23 121 0 17
Ballad Organ 0 24 95 5 17
Gospel Organ 0 25 95 3 17
Church Organ 0 26 121 0 20
Mellow Flutes 0 27 95 48 20
Medium Ensemble 0 28 95 42 20
Loud Ensemble 0 29 95 43 20
HARPSI & MALLETS
Harpsichord 0 30 95 6 7
Vibraphone 0 31 121 0 12
Clavi 0 32 121 0 8
Marimba 0 33 121 0 13
Celesta 0 34 121 0 9
Music Box OctUP 0 35 95 3 11
STRINGS & CHOIR
Slow Strings 0 36 95 1 45
String Pad 0 37 95 8 49
Warm Strings 0 38 95 1 49
DG30 MIDI Settings Manual
10
Program Change Number List
Sound Name
Multi-timbral mode = o/on1 Multi-timbral mode = on2
Bank LSB Program Number Bank MSB Bank LSB Program Number
String Ensemble 0 39 121 0 49
Choir 0 40 121 0 53
Choir 2 0 41 95 53 54
New Age 0 42 121 0 89
Atmosphere 0 43 121 0 100
BASS
Wood Bass 0 44 121 0 33
Electric Bass 0 45 121 0 34
Fretless Bass 0 46 121 0 36
W. Bass & Ride 0 47 95 1 33
OTHERS : PIANO
Jazz Grand 0 48 95 8 1
Studio Grand 3 0 49 95 17 1
Mellow Grand 3 0 50 95 18 1
Rock Piano 0 51 121 1 2
New Age Piano 0 52 95 9 1
New Age Piano 2 0 53 95 10 1
New Age Piano 3 0 54 95 11 1
Piano Octaves 0 55 95 1 1
Wide Honky Tonk 0 56 121 1 4
OTHERS : E.PIANO
Electric Grand2 0 57 121 1 3
Do lce E . P. 0 58 95 2 5
Cr ys ta l E. P. 0 59 95 1 6
Tremolo E.P. 0 60 95 1 5
Classic E.P. 4 0 61 121 1 5
Classic E.P. 5 0 62 121 2 5
New Age E.P. 0 63 95 2 6
Modern E.P. 3 0 64 121 1 6
Modern E.P. 4 0 65 121 2 6
Legend E.P. 0 66 121 3 6
Phas e E. P. 0 67 121 4 6
OTHERS : HARPSI & MALLETS
Harpsichord wTC 0 68 121 0 7
Harpsichord 2 0 69 121 3 7
Harpsichord Oct 0 70 121 1 7
WideHarpsichord 0 71 121 2 7
Synth Clavi 0 72 121 1 8
Glockenspiel 0 73 121 0 10
Music Box 0 74 121 0 11
Toy Piano 0 75 95 1 11
Wide Vibraphone 0 76 121 1 12
Wide Marimba 0 77 121 1 13
Xylophone 0 78 121 0 14
DG30 MIDI Settings Manual
11
Program Change Number List
Sound Name
Multi-timbral mode = o/on1 Multi-timbral mode = on2
Bank LSB Program Number Bank MSB Bank LSB Program Number
Handbells 0 79 95 1 15
Tubular Bells 0 80 121 0 15
Church Bells 0 81 121 1 15
Carillon 0 82 121 2 15
Dulcimer 0 83 121 0 16
OTHERS : DRAWBAR
Drawbar Organ 0 84 95 1 17
Drawbar Organ 2 0 85 95 2 17
Drawbar Organ 3 0 86 121 2 18
Drawbar Organ 4 0 87 121 3 17
Drawbar Organ 5 0 88 121 1 17
Jazzer 0 89 95 1 18
Soft Solo 0 90 95 8 17
ElectronicOrgan 0 91 95 9 17
60’s Organ 0 92 121 2 17
Perc. Organ 0 93 121 1 18
Tibia Bass 0 94 95 14 18
Rock Organ 0 95 121 0 19
OTHERS : CHURCHORGAN
Principal Oct. 0 96 95 24 20
Soft Diapason 0 97 95 45 20
Soft Strings 0 98 95 41 20
Bright Ensemble 0 99 95 47 20
Full Organ 0 100 95 44 20
Reed Ensemble 0 101 95 46 20
Diapason 0 102 95 7 20
Full Ensemble 0 103 95 1 21
Diapason Oct. 0 104 95 6 20
Theater Organ 0 105 95 1 20
8’ Celeste 0 106 95 5 20
Small Ensemble 0 107 95 8 20
Reeds 0 108 95 10 20
Chiy Tibia 0 109 95 17 20
Principal Pipe 0 110 95 22 20
Church Organ 2 0 111 121 1 20
Church Organ 3 0 112 121 2 20
Reed Organ 0 113 121 0 21
Pu Organ 0 114 121 1 21
OTHERS : ACCORDION
FrenchAccordion 0 115 121 0 22
Fr. Accordion 2 0 116 95 1 22
Accordion 0 117 121 1 22
Accordion 2 0 118 95 2 22
Blues Harmonica 0 119 95 2 23
DG30 MIDI Settings Manual
12
Program Change Number List
Sound Name
Multi-timbral mode = o/on1 Multi-timbral mode = on2
Bank LSB Program Number Bank MSB Bank LSB Program Number
Harmonica 0 120 121 0 23
Tango Accordion 0 121 121 0 24
OTHERS : GUITAR
FingerNylon Gtr 0 122 95 4 25
Nylon Acoustic 0 123 121 0 25
Nylon Acoustic2 0 124 121 2 25
Nylon Acoustic3 0 125 121 3 25
Ukulele 0 126 121 1 25
Ballad Guitar 0 127 95 6 26
Steel Guitar 0 128 121 0 26
Steel Guitar 2 1 1 121 3 26
12 String 1 2 121 1 26
Mandolin 1 3 121 2 26
Jazz Guitar 1 4 121 0 27
Pedal Steel 1 5 121 1 27
Rhythm Guitar 1 6 121 2 28
Electric Guitar 1 7 121 0 28
E. Guitar 2 1 8 121 1 28
E. Guitar 3 1 9 121 2 29
Muted Electric 1 10 121 0 29
Cutting Guitar 1 11 121 1 29
Country Lead 1 12 121 3 29
OverdriveGuitar 1 13 121 0 30
Dynmic Ov.drive 1 14 121 1 30
Distortion 1 15 121 0 31
Dist Feedback 1 16 121 1 31
Dist Rhythm 1 17 121 2 31
E.Gtr Harmonics 1 18 121 0 32
Guitar Feedback 1 19 121 1 32
OTHERS : BASS
Wood Bass 2 1 20 95 2 33
Wood Bass 3 1 21 95 4 33
Wood Bass 4 1 22 95 5 33
Electric Bass 2 1 23 95 5 34
Electric Bass 3 1 24 95 6 34
FingerSlap Bass 1 25 121 1 34
Pick Bass 1 26 121 0 35
Slap Bass 1 27 121 0 37
Slap Bass 2 1 28 121 0 38
Synth Bass 1 29 121 0 39
Synth Bass 2 1 30 121 0 40
Synth Bass 3 1 31 121 2 39
Synth Bass 4 1 32 121 1 40
Warm Synth Bass 1 33 121 1 39
DG30 MIDI Settings Manual
13
Program Change Number List
Sound Name
Multi-timbral mode = o/on1 Multi-timbral mode = on2
Bank LSB Program Number Bank MSB Bank LSB Program Number
Clavi Bass 1 34 121 3 39
Hammer Bass 1 35 121 4 39
Rubber Bass 1 36 121 2 40
Attack Bass 1 37 121 3 40
OTHERS : STR INGS& ORCHINST
Violin 1 38 121 0 41
Slow Violin 1 39 121 1 41
Viola 1 40 121 0 42
Cello 1 41 121 0 43
Contrabass 1 42 121 0 44
Tremolo Strings 1 43 121 0 45
Strings & Brass 1 44 121 1 49
60’s Strings 1 45 121 2 49
Strings sf. 1 46 95 9 49
StringEnsemble2 1 47 121 0 50
Synth Strings 1 48 121 0 51
Synth Strings 2 1 49 121 0 52
Synth Strings 3 1 50 121 1 51
Pizzicato 1 51 121 0 46
Harp 1 52 121 0 47
Celtic Harp 1 53 121 1 47
Timpani 1 54 121 0 48
OTHERS : CHOIR & HIT
Choir 3 1 55 121 1 53
Voice Oohs 1 56 121 0 54
Humming 1 57 121 1 54
DoReMi # 1 58 95 51 54
DoReMi b 1 59 95 52 54
Synth Vocal 1 60 121 0 55
Analog Voice 1 61 121 1 55
Orchestra Hit 1 62 121 0 56
Bass Hit Plus 1 63 121 1 56
6th Hit 1 64 121 2 56
Euro Hit 1 65 121 3 56
OTHERS : BRASS
Trumpet 1 66 121 0 57
Solo Trumpet 1 67 121 1 57
Flugel Horn 1 68 95 1 57
SentimentalBone 1 69 95 7 58
Trombone 1 70 121 0 58
Trombone 2 1 71 121 1 58
Bright Trombone 1 72 121 2 58
Tuba 1 73 121 0 59
CupMute Trumpet 1 74 95 1 60
DG30 MIDI Settings Manual
14
Program Change Number List
Sound Name
Multi-timbral mode = o/on1 Multi-timbral mode = on2
Bank LSB Program Number Bank MSB Bank LSB Program Number
CupMuteTrombone 1 75 95 2 60
Muted Trumpet 1 76 121 0 60
Muted Trumpet 2 1 77 121 1 60
French Horns 1 78 121 0 61
Warm FrenchHorn 1 79 121 1 61
Brass Section 1 80 121 0 62
Brass Section 2 1 81 121 1 62
Synth Brass 1 82 121 0 63
Synth Brass 2 1 83 121 0 64
Synth Brass 3 1 84 121 1 63
Synth Brass 4 1 85 121 1 64
Jump Brass 1 86 121 3 63
Analog Brass 1 87 121 2 63
Analog Brass 2 1 88 121 2 64
OTHERS : REED
Oboe & Strings 1 89 95 5 69
Soprano Sax 1 90 121 0 65
Alto Sax 1 91 121 0 66
Soft Tenor Sax 1 92 95 2 67
Tenor Sax 1 93 121 0 67
Baritone Sax 1 94 121 0 68
Oboe 1 95 121 0 69
English Horn 1 96 121 0 70
Bassoon 1 97 121 0 71
Clarinet 1 98 121 0 72
OTHERS : PIPE
Flute & Strings 1 99 95 8 74
Piccolo 1 100 121 0 73
Jazz Flute 1 101 95 1 74
Big Band Winds 1 102 95 2 74
OrchestralWinds 1 103 95 3 74
Flute 1 104 121 0 74
Ballad Flute 1 105 95 13 74
Recorder 1 106 121 0 75
Pan Flute 1 107 121 0 76
Blown Bottle 1 108 121 0 77
Shakuhachi 1 109 121 0 78
Whistle 1 110 121 0 79
Ocarina 1 111 121 0 80
OTHERS : SYNTH LEAD
Square 1 112 121 0 81
Square 2 1 113 121 1 81
Sine 1 114 121 2 81
Classic Synth 1 115 121 0 82
DG30 MIDI Settings Manual
15
Program Change Number List
Sound Name
Multi-timbral mode = o/on1 Multi-timbral mode = on2
Bank LSB Program Number Bank MSB Bank LSB Program Number
Classic Synth 2 1 116 121 1 82
Lead 1 117 121 2 82
Classic Synth 3 1 118 121 3 82
SequencedAnalog 1 119 121 4 82
Caliope 1 120 121 0 83
Chi 1 121 121 0 84
Charang 1 122 121 0 85
Wire Lead 1 123 121 1 85
Voice 1 124 121 0 86
Fifth 1 125 121 0 87
Bass & Lead 1 126 121 0 88
Soft Wire Lead 1 127 121 1 88
OTHERS : SYNTH PAD
Itopia 1 128 121 1 92
New Age 2 2 1 95 1 89
New Age 3 2 2 95 2 89
New Age 4 2 3 95 3 89
Warm Pad 2 4 121 0 90
Sine Pad 2 5 121 1 90
Bright Warm Pad 2 6 95 1 90
Polysynth 2 7 121 0 91
Choir Pad 2 8 121 0 92
Bowed Pad 2 9 121 0 93
Metallic Pad 2 10 121 0 94
Halo Pad 2 11 121 0 95
Sweep Pad 2 12 121 0 96
Multi Sweep 2 13 95 1 96
OTHERS : SYNTH SFX
Rain Pad 2 14 121 0 97
Soundtrack 2 15 121 0 98
Crystal 2 16 121 0 99
Synth Mallet 2 17 121 1 99
Brightness 2 18 121 0 101
Brightness 2 2 19 95 1 101
Goblin 2 20 121 0 102
Echoes 2 21 121 0 103
Echo Bell 2 22 121 1 103
Echo Pan 2 23 121 2 103
Sci-Fi 2 24 121 0 104
OTHERS : ETHNIC
Sitar 2 25 121 0 105
Sitar 2 2 26 121 1 105
Banjo 2 27 121 0 106
Shamisen 2 28 121 0 107
DG30 MIDI Settings Manual
16
Program Change Number List
Sound Name
Multi-timbral mode = o/on1 Multi-timbral mode = on2
Bank LSB Program Number Bank MSB Bank LSB Program Number
Koto 2 29 121 0 108
Taisho Koto 2 30 121 1 108
Kalimba 2 31 121 0 109
Bag Pipe 2 32 121 0 110
Fiddle 2 33 121 0 111
Shanai 2 34 121 0 112
OTHERS : PERCUSSION
Tinkle Bell 2 35 121 0 113
Agogo 2 36 121 0 114
Steel Drums 2 37 121 0 115
Woodblock 2 38 121 0 116
Castanet 2 39 121 1 116
Taiko Drums 2 40 121 0 117
Concert BD 2 41 121 1 117
Melodic Toms 2 42 121 0 118
Melodic Toms 2 2 43 121 1 118
Synth Drum 2 44 121 0 119
Rhythm Box Tom 2 45 121 1 119
Electric Drum 2 46 121 2 119
Reverse Cymbal 2 47 121 0 120
Gtr Fret Noise 2 48 121 0 121
GtrCuttingNoise 2 49 121 1 121
CuttingNoise 2 2 50 95 1 121
Ac Bass Slap 2 51 121 2 121
OTHERS : SFX
Breath Noise 2 52 121 0 122
Flute Key Click 2 53 121 1 122
Seashore 2 54 121 0 123
Rain 2 55 121 1 123
Thunder 2 56 121 2 123
Wind 2 57 121 3 123
Stream 2 58 121 4 123
Bubble 2 59 121 5 123
Bird Tweet 2 60 121 0 124
Dog Barking 2 61 121 1 124
Horse Gallop 2 62 121 2 124
Bird Tweet 2 2 63 121 3 124
Cat&Dog&Harp 2 64 95 12 124
Telephone 2 65 121 0 125
Telephone 2 2 66 121 1 125
Door Creak 2 67 121 2 125
Door Slam 2 68 121 3 125
Scratch 2 69 121 4 125
Wind Chime 2 70 121 5 125
DG30 MIDI Settings Manual
17
Program Change Number List
Sound Name
Multi-timbral mode = o/on1 Multi-timbral mode = on2
Bank LSB Program Number Bank MSB Bank LSB Program Number
Helicopter 2 71 121 0 126
Car Engine 2 72 121 1 126
Car Stopping 2 73 121 2 126
Car Passing 2 74 121 3 126
Car Crash 2 75 121 4 126
Siren 2 76 121 5 126
Train 2 77 121 6 126
Jet Plane 2 78 121 7 126
Starship 2 79 121 8 126
Burst Noise 2 80 121 9 126
Applause 2 81 121 0 127
Laughing 2 82 121 1 127
Screaming 2 83 121 2 127
Punch 2 84 121 3 127
Heartbeat 2 85 121 4 127
Foot Step 2 86 121 5 127
Gunshot 2 87 121 0 128
Machine Gun 2 88 121 1 128
Laser Gun 2 89 121 2 128
Explosion 2 90 121 3 128
OTHERS : DRUMKIT
Standard Set 2 91 120 0 1
Room Set 2 92 120 0 9
Power Set 2 93 120 0 17
Electronic Set 2 94 120 0 25
Analog Set 2 95 120 0 26
Jazz Set 2 96 120 0 33
Brush Set 2 97 120 0 41
Orchestra Set 2 98 120 0 49
SFX Set 2 99 120 0 57
DG30 MIDI Settings Manual
18
MIDI Exclusive Data Format
1st byte 2nd byte 3rd byte 4th byte 5th byte 6th byte 7th byte 8th byte 9th byte 10th byte
1 2 3 4 5 6 7 8 9 10
Byte ID Description
1 F0 Start code
2 40 Kawai ID number
3 00 - 0F MIDI channel
4 10, 30 Function code (30 when setting Multi-timbre On/O)
5 04 Indicates that the instrument is an electric piano
6 13
Indicates that the piano is a DG30 model
7 data 1
See table below8 data 2
9 data 3
10 F7 End code
data 1 data 2 data 3 Function
00 00 - Multi-timbre O
02 00 - Multi-timbre On 1
01 00 - Multi-timbre On 2
0F 15 - 6C - Split Point A0-C8
14 00 - 7F - Dual/Split balance
16 1F - 60 - Tune, 40 : 440 Hz
17 00, 7F - 00 : Program Change O, 7F : Program Change On
18 00 - 07 - 00 : Light, 01 : Normal, 02 : Heavy, 03 : O, 04 : Light +, 05 : Heavy +, 06 : User1, 07 : User2
19 00 - 03 - Lower Octave Shift
20 00 - 7F 00 - 7F Dual, data 2 : Main sound, data 3 : Layer sound
21 00 - 7F 00 - 7F Split, data 2 : Upper sound, data 3 : Lower sound
22 00 - 7F 00 -7F Four Hands, data2 : Right sound, data3 : Left sound
25 00 - 09 00 - 0B
data2 : Temperament
00 : Equal, 01 : Pure Major, 02 : Pythagorean, 03 : Meantone,
04 : Werkmeister, 05 : Kirnberger, 07 : Pure Minor, 09 : User
data3 : Key
26 00, 7F 00 - 0F Multi-timbre, data 2 : 00 (Mute), 7F (Play), data 3 : Channel
27 00 - 02 00 - 02 Dual/Split, Right (Upper)/Left (Lower), sound Bank LSB
DG30 MIDI Settings Manual
19
MIDI Implementation Chart
S
P00000476 R100
Kawai DG30 digital piano
Date: June 2020 Version: 1.0
Function Transmit Receive Remarks
Basic channel
At power-up 1 1
Settable 1 - 16 1 - 16
Mode
At power-up Mode 3 Mode 1
* The default for the OMNI
mode is On.
Specifying MIDI channels
automatically turns it O.
Message X Mode 1, 3
Alternative ********* X
Note number
9 - 120** 0 - 127
** The value depends on
the Transpose setting.
Range ********* 0 - 127
Velocity
Note on O O
Note o O O
After touch
Key specic X X
Channel specic X O
Pitch bend
X O
Control change
0, 32
1
5
6, 38
7
10
11
64
65
66
67
69
70
71
72
73
74
75
76
77
78
84
91
93
98, 99
100, 101
O
X
X
X
X
X
X
O(
Right pedal
)
X
O(
Center pedal
)
O(
Left pedal)
O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Bank Select *1
Modulation
Portament Time
Data Entry
Volu me
Panpot
Expression Pedal
Sustain Pedal
Portament
Sostenuto Pedal
Soft Pedal
Hold 2
Sustain Level
Resonance
Release Time
Attack Time
Cutto
Decay Time
Vibrato Speed
Vibrato Depth
Vibrato Delay
Portament Control
Reverb Send Level
Chorus Send Level
NRPN LSB, MSB
RPN LSB, MSB
Program change
O 0-127 O *1
True *********
Exclusive
O O On/O Selectable
Common
Song position X X
Song selection X X
Tune X X
Real time
Clock X X
Commands X X
Other functions
All sound O X O(120)
Reset all controller
X O(121)
Local On / O X O
All notes O X O(123 - 127)
Active sensing X O
Reset X X
*1 Please refer to the Program Change Number List on page 9.
Mode 1: omni mode On, Poly Mode 2: omni mode On, Mono O : Yes
Mode 3: omni mode O, Poly Mode 4: omni mode O, Mono X : No
DG30 MIDI Settings Manual
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

Kawai CA97 Owner's manual

CA97
Kawai
Brand
Kawai
Model
CA97
Category
MIDI keyboards
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents