Botex ART-4 User manual

ART-4 RGBW /

ART-9 RGBW

DMX controller

User manual

Musikhaus Thomann

Thomann GmbH

Hans-Thomann-Straße 1

96138 Burgebrach

Germany

Telephone: +49 (0) 9546 9223-0

E-mail: [email protected]

Internet: www.thomann.de

05.05.2020, ID: 477612, 477613

Table of contents

1 General information................................................................................................................................. 6

1.1 Further information........................................................................................................................... 7

1.2 Notational conventions.................................................................................................................... 8

1.3 Symbols and signal words............................................................................................................... 9

2 Safety instructions.................................................................................................................................. 11

3 Features....................................................................................................................................................... 16

4 Installation and starting up................................................................................................................ 17

5 Connections and controls................................................................................................................... 19

6 Operating.................................................................................................................................................... 23

6.1 Turning the device on / o........................................................................................................... 23

6.1.1 Button combination for standby mode................................................................................ 24

6.1.2 Fade time......................................................................................................................................... 25

6.2 Built-in colour programmes......................................................................................................... 26

6.3 Brightness........................................................................................................................................... 26

6.4 Run duration...................................................................................................................................... 27

Table of contents

ART-4 RGBW / ART-9 RGBW

3

DMX controller

6.5 Colours................................................................................................................................................. 28

6.5.1 Manual colour setting................................................................................................................. 28

6.5.2 Saving colour setting.................................................................................................................. 28

6.5.3 Rendering colour setting........................................................................................................... 29

6.5.4 Fade time......................................................................................................................................... 30

6.6 Scenes.................................................................................................................................................. 31

6.6.1 Saving scenes................................................................................................................................. 31

6.6.2 Playing scenes................................................................................................................................ 32

6.6.3 Locking / unlocking scene recording mode....................................................................... 32

6.7 Functions in DMX mode................................................................................................................ 33

6.8 Turning the click tone on and o............................................................................................... 34

6.9 Factory defaults................................................................................................................................ 35

6.10 Data transfer.................................................................................................................................... 35

7 Technical specications....................................................................................................................... 37

8 Protecting the environment.............................................................................................................. 40

Table of contents

4

ART-4 RGBW / ART-9 RGBW

DMX controller

ART-4 RGBW / ART-9 RGBW

5

DMX controller

1 General information

This user manual contains important information on the safe operation of the device. Read and

follow all safety notes and all instructions. Save this manual for future reference. Make sure

that it is available to all persons using this device. If you sell the device to another user, be sure

that they also receive this manual.

Our products and user manuals are subject to a process of continuous development. We there‐

fore reserve the right to make changes without notice. Please refer to the latest version of the

user manual which is ready for download under www.thomann.de.

General information

6

ART-4 RGBW / ART-9 RGBW

DMX controller

1.1 Further information

On our website (www.thomann.de) you will nd lots of further information and details on the

following points:

Download This manual is also available as PDF le for you to download.

Keyword search

Use the search function in the electronic version to nd the topics of

interest for you quickly.

Online guides

Our online guides provide detailed information on technical basics

and terms.

Personal consultation For personal consultation please contact our technical hotline.

Service

If you have any problems with the device the customer service will

gladly assist you.

General information

ART-4 RGBW / ART-9 RGBW

7

DMX controller

1.2 Notational conventions

This manual uses the following notational conventions:

The letterings for connectors and controls are marked by square brackets and italics.

Examples: [VOLUME] control, [Mono] button.

The individual steps of an instruction are numbered consecutively. The result of a step is

indented and highlighted by an arrow.

Example:

1. Switch on the device.

2. Press [Auto].

ð

Automatic operation is started.

3. Switch o the device.

Letterings

Instructions

General information

8

ART-4 RGBW / ART-9 RGBW

DMX controller

References to other locations in this manual are identied by an arrow and the specied page

number. In the electronic version of the manual, you can click the cross-reference to jump to

the specied location.

Example: See

Ä

‘Cross-references’ on page 9.

1.3 Symbols and signal words

In this section you will nd an overview of the meaning of symbols and signal words that are

used in this manual.

Signal word Meaning

DANGER! This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or

serious injury if it is not avoided.

NOTICE! This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in material and

environmental damage if it is not avoided.

Cross-references

General information

ART-4 RGBW / ART-9 RGBW

9

DMX controller

Warning signs Type of danger

Warning – high-voltage.

Warning – danger zone.

General information

10

ART-4 RGBW / ART-9 RGBW

DMX controller

2 Safety instructions

This appliance is designed for professional use only and is intended to be used to control the

brightness of connected spotlights. Use the device only as described in this user manual. Any

other use or use under other operating conditions is considered to be improper and may result

in personal injury or property damage. No liability will be assumed for damages resulting from

improper use.

This device may be used only by persons with sucient physical, sensorial, and intellectual

abilities and having corresponding knowledge and experience. Other persons may use this

device only if they are supervised or instructed by a person who is responsible for their safety.

Intended use

Safety instructions

ART-4 RGBW / ART-9 RGBW

11

DMX controller

DANGER!

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are not

within reach of babies and young children. Choking hazard!

Ensure that children do not detach any small parts (e.g. knobs or the like) from

the unit. They could swallow the pieces and choke!

Never let children unattended use electrical devices.

DANGER!

Electric shock caused by high voltages inside

Within the device there are areas where high voltages may be present. Never

remove any covers.

There are no user-serviceable parts inside.

Do not use the device if covers, protectors or optical components are missing or

damaged.

Safety

Safety instructions

12

ART-4 RGBW / ART-9 RGBW

DMX controller

DANGER!

Hazardous voltage

Hazardous voltage may be present at cable ends and screw terminals.

The connection of screw terminals as well as all maintenance and repair work on

the electrical installation of the device must only be performed by qualied elec‐

trical personnel in volt-free condition. Failure to do so may result in electric shock

and risk of re and loss of life.

By all means you have to observe all electrical safety instructions applicable at the

place of operation.

NOTICE!

Risk of re

Do not block areas of ventilation. Do not install the device near any direct heat

source. Keep the device away from naked ames.

Safety instructions

ART-4 RGBW / ART-9 RGBW

13

DMX controller

NOTICE!

Operating conditions

This device has been designed for indoor use only. To prevent damage, never

expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and

strong vibrations.

Only operate the device within the ambient conditions specied in the chapter

‘Technical specications’ of this user manual. Avoid heavy temperature uctua‐

tions and do not switch the device on immediately after it was exposed to tem‐

perature uctuations (for example after transport at low outside temperatures).

Dust and dirt inside can damage the unit. When operated in harmful ambient

conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by

qualied service personnel at regular intervals to prevent overheating and other

malfunction.

Safety instructions

14

ART-4 RGBW / ART-9 RGBW

DMX controller

NOTICE!

Power supply

Before connecting the device, ensure that the input voltage (AC outlet) matches

the voltage rating of the device and that the AC outlet is protected by a residual

current circuit breaker. Failure to do so could result in damage to the device and

possibly injure the user.

Unplug the device before electrical storms occur and when it is unused for long

periods of time to reduce the risk of electric shock or re.

Safety instructions

ART-4 RGBW / ART-9 RGBW

15

DMX controller

3 Features

n 4 channels

n 4 storable scenes and 4 storable colours (ART-4 RGBW)

n 9 storable scenes and 9 storable colours (ART-9 RGBW)

n 10 built-in colour programmes with adjustable duration and one automatic programme

n Denable fade times from 0 to 4 seconds (ART-4 RGBW) or 0 to 9 seconds (ART-9 RGBW) for

switching on and changing colours

n Link input and output for networking up to 32 devices

n Pre-congured DMX patch with RGBW channels

n Touch-sensitive buttons and touch dial with lighting

n Aluminium case with glass surface

n Power supply not included

Features

16

ART-4 RGBW / ART-9 RGBW

DMX controller

4 Installation and starting up

Unpack and check carefully there is no transportation damage before using the unit. Keep the

equipment packaging. To fully protect the product against vibration, dust and moisture during

transportation or storage use the original packaging or your own packaging material suitable

for transport or storage, respectively.

Create all connections while the device is o. Use the shortest possible high-quality cables for

all connections. Take care when running the cables to prevent tripping hazards.

First connect your LED stripes to the [PWM Out] terminals and the devices to be controlled to

the [DMX Out] terminals. Then establish the connection to a power supply unit (12 – 24 V).

Connector

Installation and starting up

ART-4 RGBW / ART-9 RGBW

17

DMX controller

DANGER!

Hazardous voltage

Hazardous voltage may be present at cable ends and screw terminals.

The connection of screw terminals as well as all maintenance and repair work on

the electrical installation of the device must only be performed by qualied elec‐

trical personnel in volt-free condition. Failure to do so may result in electric shock

and risk of re and loss of life.

By all means you have to observe all electrical safety instructions applicable at the

place of operation.

Installation and starting up

18

ART-4 RGBW / ART-9 RGBW

DMX controller

5 Connections and controls

ART-4 RGBW

Connections and controls

ART-4 RGBW / ART-9 RGBW

19

DMX controller

ART-9 RGBW

Connections and controls

20

ART-4 RGBW / ART-9 RGBW

DMX controller

Page is loading ...

Botex ART-4, ART-9 User manual

Related papers

Other documents