Audix TM-1 is a 6 mm pre-polarized condenser microphone used for test and measurement applications. It is designed to capture acoustic measurements, such as room analysis, using software programs and real-time analyzers. The TM-1 is known for its linearity, accurate response, consistency, ease of use, and affordability. It features a uniformly controlled omnidirectional polar pattern, capturing sound from all directions. With an extremely flat frequency range of 20 Hz to 25 kHz, it's an excellent tool for sound engineers, sound companies, and recording enthusiasts. Requiring 18 - 52 Volts of phantom power for operation, the TM-1 features a precision-machined 4-stage brass body, nickel plate finish, Switchcraft® XLR, shock-absorbent O-rings, and heavy-duty snap-to-fit mic clip.
Audix TM-1 is a 6 mm pre-polarized condenser microphone used for test and measurement applications. It is designed to capture acoustic measurements, such as room analysis, using software programs and real-time analyzers. The TM-1 is known for its linearity, accurate response, consistency, ease of use, and affordability. It features a uniformly controlled omnidirectional polar pattern, capturing sound from all directions. With an extremely flat frequency range of 20 Hz to 25 kHz, it's an excellent tool for sound engineers, sound companies, and recording enthusiasts. Requiring 18 - 52 Volts of phantom power for operation, the TM-1 features a precision-machined 4-stage brass body, nickel plate finish, Switchcraft® XLR, shock-absorbent O-rings, and heavy-duty snap-to-fit mic clip.
Audix TM-1 is a 6 mm pre-polarized condenser microphone used for test and measurement applications. It is designed to capture acoustic measurements, such as room analysis, using software programs and real-time analyzers. The TM-1 is known for its linearity, accurate response, consistency, ease of use, and affordability. It features a uniformly controlled omnidirectional polar pattern, capturing sound from all directions. With an extremely flat frequency range of 20 Hz to 25 kHz, it's an excellent tool for sound engineers, sound companies, and recording enthusiasts. Requiring 18 - 52 Volts of phantom power for operation, the TM-1 features a precision-machined 4-stage brass body, nickel plate finish, Switchcraft® XLR, shock-absorbent O-rings, and heavy-duty snap-to-fit mic clip.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI