Ohlins FGHO1194 Mounting Instruction

Öhlins Front Fork Kit for Honda CRF 450 R

FGHO 1194

Application Speciﬁc Mounting Instructions

Issued 2010-11-05

Kit Contents (application speciﬁc)

Recommended Tools (application speciﬁc)

Hydraulic Stop Cup

Set-Up Data

Spring Recommendation

Part No. Pcs.

Front Fork kit FGHO 1194 1

Base plug (with o-rings) 15430-03 2

Spacer 2 mm 15443-02 6

Hydraulic Stop Cup N/A N/A

Spring Support washer N/A N/A

OEM Fork Cap Tool 49 mm, octagon

Socket for OEM Base Plug 17 mm

Socket for Öhlins Base Plug 20 mm

FGHO 1194 Cartridge kit uses STD/OEM Hydraulic stop cup.

Rebound Damping 15 clicks

Compression Damping 15 clicks

Spring Preload 1 mm

Fluid Volume (each leg) 0,370 litre

Cartridge Kit FGHO 1194 shall be used together with

Öhlins Front Fork Springs part no. 08775-xx. For rate

recommendations, see Owner’s Manual/ General Mounting

Instructions.

Note!

The fork springs need to be ordered separately depending on the

rider’s choice of spring rate.

Part No. Pcs.

Circlip 15440-01 2

Öhlins Sticker 00192-01 2

TTX Cartridge Sticker 00191-29 2

Owners Manual 07296-90 1

Spring preload range -2 to 8 mm

(can be adjusted by adding/removing washers 15443-02)

Fluid volume range (each leg) 0,300 - 0,400 litre

Öhlins Front Fork uid 01312-01