Avanti Item 64934 Owner's manual

Category
Power fine-spray systems
Type
Owner's manual

This manual is also suitable for

Avanti Item 64934 is a versatile tool designed to meet the needs of both DIY enthusiasts and professional painters. With its powerful motor and precision spray gun, it delivers exceptional performance for a wide range of painting projects. Here are some key capabilities of this device:

• Precise Spraying: The spray gun features adjustable spray patterns and flow rate control, allowing you to achieve the perfect finish for any surface.

• Durability: Made with high-quality materials, Avanti Item 64934 is built to withstand the demands of frequent use and harsh environments.

• Easy Maintenance: Cleaning and maintaining the spray gun is a breeze, ensuring minimal downtime and extending the life of your tool.

Avanti Item 64934 is a versatile tool designed to meet the needs of both DIY enthusiasts and professional painters. With its powerful motor and precision spray gun, it delivers exceptional performance for a wide range of painting projects. Here are some key capabilities of this device:

• Precise Spraying: The spray gun features adjustable spray patterns and flow rate control, allowing you to achieve the perfect finish for any surface.

• Durability: Made with high-quality materials, Avanti Item 64934 is built to withstand the demands of frequent use and harsh environments.

• Easy Maintenance: Cleaning and maintaining the spray gun is a breeze, ensuring minimal downtime and extending the life of your tool.

!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5
65,"7%&'(%$*4.8"4,7%#'//&($%,$-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5
Owners Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 19a
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2018 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly an d se rv ic e may n ot b e in cl uded.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
NOTICE
;<6=>%?@@6A?=B6<C
;7*,8%$.*%D/(,E%F'8%
?@@6A?=B6<C%,2$*(%6!6GC%
'#*%,89%).*8%"$%)"77%+*%"97*%
2&(%5&(*%$.,8%HI%5"8'$*#1
A*7,E*9%&(%"8,9*J',$*%
47*,8"83%)"77%/*(5,8*8$7E%
47&3%$.*%D/(,E%F'81
Page 2 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC VW6G=B?V> @=?>B6>=>;6D6BXW
B,+7*%&2%;&8$*8$#
Safety .......................................................................2
Specifications ...........................................................7
Setup ........................................................................9
Operation .................................................................10
Maintenance ............................................................14
Parts List and Diagram ............................................18
Warranty ..................................................................20
T=G>?>F%DC@YV<D%=>A%A6K?>?B?V>D
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
?@WVGB=>B%D=K6BC%?>DBGX;B?V>D
W*(#&8,7%D,2*$E
1. D$,E%,7*($1%%T,$4.%).,$%E&'%,(*%9&"83%,89%
'#*%4&55&8%#*8#*%).*8%&/*(,$"83%$.*%$&&71%%
A&%8&$%'#*%$.*%$&&7%)."7*%$"(*9%&(%'89*(%$.*%
"827'*84*%&2%9('3#L%,74&.&7L%&(%5*9"4,$"&81
A moment of inattention while operating the
tool increases the risk of injury to persons.
2. A(*##%/(&/*(7E1%%A&%8&$%)*,(%7&&#*%47&$."83%
&(%Z*)*7(E1%%;&8$,"8%7&83%.,"(1%%[**/%.,"(L%
47&$."83L%,89%37&\*#%,),E%2(&5%5&\"83%/,($#1
Loose clothes, jewelry, or long hair increases
the risk of injury to persons as a result
of being caught in moving parts.
3. A&%8&$%&\*((*,4.1%%[**/%/(&/*(%
2&&$"83%,89%+,7,84*%,$%,77%$"5*#1
Proper footing and balance enables better
control of the tool in unexpected situations.
Page 3K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCVW6G=B?V>@=?>B6>=>;6 D6BXW
4. X#*%#,2*$E%*J'"/5*8$1
Wear protective paint spraying
gloves and a NIOSH-approved
respirator during use. Non-skid safety
shoes and a hard hat must be used for
the applicable conditions.
5. =7),E#%)*,(%*E*%/(&$*4$"&81
Wear ANSI-approved safety goggles.
B&&7%X#*%,89%;,(*
1. A&%8&$%2&(4*%$.*%$&&71 Use the correct tool for the
application. The correct tool will do the job better
and safer at the rate for which the tool is designed.
b. X8/7'3%$.*%$&&7%+*2&(*%5,U"83%,8E%
,9Z'#$5*8$#L%4.,83"83%,44*##&("*#L%&(%
#$&("83%$.*%$&&71 Such preventive safety
measures reduce the risk of starting the tool
unintentionally. Turn off and detach the air supply,
safely discharge any residual air pressure, and
release the throttle and/or turn the switch to its
off position before leaving the work area.
c. D$&(*%$.*%$&&7%).*8%"$%"#%"97*%&'$%&2%(*,4.%
&2%4."79(*8%,89%&$.*(%'8$(,"8*9%/*(#&8#1%%
A tool is dangerous in the hands of untrained users.
d. ;.*4U%2&(%5"#,7"385*8$%&(%+"89"83%&2%5&\"83%
/,($#L%+(*,U,3*%&2%/,($#L%,89%,8E%&$.*(%4&89"$"&8%
$.,$%,22*4$#%$.*%$&&7]#%&/*(,$"&81%%If damaged,
have the tool serviced before using. Many accidents
are caused by poorly maintained tools.
There is a risk of bursting if the tool is damaged.
e. X#*%&87E%,44*##&("*#%$.,$%,(*%"9*8$"2"*9%+E%$.*%
5,8'2,4$'(*(%2&(%$.*%#/*4"2"4%$&&7%5&9*71 Use of
an accessory not intended for use with the specific
tool model, increases the risk of injury to persons.
D*(\"4*
a. B&&7%#*(\"4*%5'#$%+*%/*(2&(5*9%&87E%
+E%J',7"2"*9%(*/,"(%/*(#&88*71
b. T.*8%#*(\"4"83%,%$&&7L%'#*%&87E%"9*8$"4,7%
(*/7,4*5*8$%/,($#1%%X#*%&87E%,'$.&("^*9%/,($#1
c. X#*%&87E%7'+("4,8$#%#'//7"*9%)"$.%$.*%
$&&7%&(%#/*4"2"*9%+E%$.*%5,8'2,4$'(*(1
D/*4"2"4%D,2*$E%?8#$('4$"&8#
1. B&%(*9'4*%$.*%("#U%&2%*7*4$("4%#.&4UL%%
9&%8&$%*_/&#*%$&%(,"81%%D$&(*%"89&&(#1
2. G"#U%&2%6_/7&#"&8%`%%
A&%8&$%#/(,E%27,55,+7*%7"J'"9#1
3. Do not direct spray at people or animals.
4. Read all of the information concerning
coating products and cleaning solvents.
A&%8&$%'#*%4.7&("8,$*9%#&7\*8$#%
a*131%MNMNM%$("4.7&(&*$.E7*8*%,89%
9"4.7&(&5*$.,8*L%,7#&%U8&)8%,#%
5*$.E7*8*%4.7&("9*b%$&%47*,8%#/(,E%3'8#1%%
@,8E%#/(,E%3'8#%4&8$,"8%,7'5"8'5L%
)."4.%(*,4$#%#$(&837E%$&%4.7&("8,$*9%#&7\*8$#1%%
Contact the solvent or coating manufacturer as
needed regarding potential chemical reactions.
5. Risk of injection Do not point spray gun at any
person or any part of the body. In case of skin
injection, seek medical attention immediately.
6. Spraying hazardous materials may result in serious
injury or death. Do not spray pesticide, acid,
corrosive material, fertilizer, or toxic chemicals.
7. Paints and solvents may be harmful or fatal if
swallowed or inhaled. Avoid prolonged skin
contact with solvents or paints as they will
irritate skin. After any contact, immediately
wash off exposed area with hot, soapy water.
8. Attach all accessories properly to the tool
before plugging in the tool. A loose accessory
may detach or break during operation.
9. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
10. Avoid unintentional starting. Prepare to
begin work before turning on the tool.
Page 4 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC VW6G=B?V> @=?>B6>=>;6D6BXW
11. Do not leave the tool unattended when it is plugged
into an electrical outlet. Turn off the tool, and
unplug it from its electrical outlet before leaving.
12. This product is not a toy.
Keep it out of reach of children.
13. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure. In
addition, people with pacemakers should:
Avoid operating alone.
• Do not use with power switch locked on.
• Properly maintain and inspect
to avoid electrical shock.
• Properly ground power cord. Ground Fault Circuit
Interrupter (GFCI) should also be implemented
– it prevents sustained electrical shock.
14. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
%D=!6%Bc6D6%?>DBGX;B?V>D1
Page 5K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCVW6G=B?V>@=?>B6>=>;6 D6BXW
DE5+&7%A*2"8"$"&8#
DE5+&7 W(&/*($E%&(%D$,$*5*8$
Double Insulated
!=;
Volts Alternating Current
=
Amperes
WARNING marking concerning
Risk of Eye Injury.
Wear ANSI-approved eye protection.
WARNING marking concerning
Risk of Respiratory Injury.
Wear NIOSH-approved respirator.
DE5+&7 W(&/*($E%&(%D$,$*5*8$
WARNING marking concerning
Risk of Explosion.
WARNING marking concerning Risk
of Fire.
Do not use solvents improperly.
WARNING marking concerning
Risk of Electric Shock.
Properly connect power cord
to appropriate outlet.
Page 6 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC VW6G=B?V> @=?>B6>=>;6D6BXW
F(&'89"83
BV%WG6!6>B%6<6;BG?;%DcV;[%=>A%A6=Bc%KGV@%
?>;VGG6;B%FGVX>A?>F%T?G6%;V>>6;B?V>-%
;.*4U%)"$.%,%J',7"2"*9%*7*4$("4",8%"2%E&'%,(*%"8%9&'+$%,#%$&%).*$.*(%$.*%&'$7*$%"#%/(&/*(7E%3(&'89*91%%
A&%8&$%5&9"2E%$.*%/&)*(%4&(9%/7'3%/(&\"9*9%)"$.%$.*%$&&71%%>*\*(%(*5&\*%$.*%3(&'89"83%/(&83%2(&5%
$.*%/7'31%%A&%8&$%'#*%$.*%$&&7%"2%$.*%/&)*(%4&(9%&(%/7'3%"#%9,5,3*91%%?2%9,5,3*9L%.,\*%"$%(*/,"(*9%+E%,%
#*(\"4*%2,4"7"$E%+*2&(*%'#*1%%?2%$.*%/7'3%)"77%8&$%2"$%$.*%&'$7*$L%.,\*%,%/(&/*(%&'$7*$%"8#$,77*9%+E%,%
J',7"2"*9%*7*4$("4",81
A&'+7*%?8#'7,$*9%B&&7#-%B&&7#%)"$.%B)&%W(&83%W7'3#
K"3'(*%=-%%V'$7*$#%2&(%dNW(&83%W7'3
1. Tools marked “Double Insulated” do not
require grounding. They have a special
double insulation system which satisfies OSHA
requirements and complies with the applicable
standards of Underwriters Laboratories, Inc.,
the Canadian Standard Association,
and the National Electrical Code.
2. Double insulated tools may be used in
either of the 120 volt outlets shown in the
preceding illustration. aD**%K"3'(*%=1b
3. This appliance has a polarized plug (one blade is
wider than the other). This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper
outlet. Do not change the plug in any way.
6_$*8#"&8%;&(9#
1. Grounded tools require a three wire extension cord.
Double Insulated tools can use either a
two or three wire extension cord.
2. As the distance from the supply outlet increases,
you must use a heavier gauge extension cord.
Using extension cords with inadequately sized wire
causes a serious drop in voltage, resulting in loss of
power and possible tool damage. aD**%B,+7*%=1b
3. The smaller the gauge number of the wire, the
greater the capacity of the cord. For example,
a 14 gauge cord can carry a higher current
than a 16 gauge cord. aD**%B,+7*%=1b
4. When using more than one extension cord to make
up the total length, make sure each cord contains at
least the minimum wire size required. aD**%B,+7*%=1b
5. If you are using one extension cord for more
than one tool, add the nameplate amperes
and use the sum to determine the required
minimum cord size. aD**%B,+7*%=1b
Page 7K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCVW6G=B?V>@=?>B6>=>;6 D6BXW
1. If you are using an extension cord outdoors, make
sure it is marked with the suffix “W-A” (“W” in
Canada) to indicate it is acceptable for outdoor use.
2. Make sure the extension cord is properly wired
and in good electrical condition. Always replace
a damaged extension cord or have it repaired
by a qualified electrician before using it.
3. Protect the extension cords from sharp objects,
excessive heat, and damp or wet areas.
B,+7*%=-%%G*4&55*89*9%
@"8"5'5%T"(*%F,'3*%
forExtensionCords*(120 / 240Volt)
>=@6W<=B6
=@W6G6D
a,$%2'77%7&,9b
6eB6>D?V>%;VGA%
<6>FBc
dQf
QIf
RQf
MIIf
MQIf
0 – 2.0 18 18 18 18 16
2.1 – 3.4 18 18 18 16 14
3.5 – 5.0 18 18 16 14 12
5.1 – 7.0 18 16 14 12 12
7.1 – 12.0 18 14 12 10 -
12.1 – 16.0 14 12 10 - -
16.1 – 20.0 12 10 - - -
g%Y,#*9%&8%7"5"$"83%$.*%7"8*%\&7$,3*%9(&/%$&%
2"\*%\&7$#%,$%MQIh%&2%$.*%(,$*9%,5/*(*#1
D/*4"2"4,$"&8#
Electrical Rating 120 VAC / 60 Hz / 4 A
Cup Capacity 48 fl. oz.
Tip Size 2.5mm
cVXD6cV<A%XD6%V><C1
Page 8 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC VW6G=B?V> @=?>B6>=>;6D6BXW
D*$NX/-%Y*2&(*%X#*
G*,9%$.*%6>B?G6%?@WVGB=>B%D=K6BC%?>KVG@=B?V>%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%5,8',7%
"847'9"83%,77%$*_$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1
;&5/&8*8$#
="(%
;,/%
<&4U%
G"83
D/(,E%
F'8%
Y&9E
B("33*(
K7'"9%
;&8$(&7%
[8&+
;'/
="(%
;&5/(*##&(
Page 9K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCVW6G=B?V>@=?>B6>=>;6 D6BXW
=##*5+7E
1. Line up arrow on Spray Gun Body
to arrow on Air Compressor.
="(%
;&5/(*##&(
D/(,E%
F'8%
Y&9E
2. Turn Air Compressor clockwise until
it locks with Spray Gun Body.
3. Push Clip forward until it clicks to attach
Air Compress and Spray Gun Body together.
;7"/
D'4$"&8%B'+*%W&#"$"&8
Normal Spraying - Suction Tube angled forward.
D'4$"&8%
B'+*
Upward Spraying - Suction Tube angled backward.
Page 10 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC VW6G=B?V> @=?>B6>=>;6D6BXW
V/*(,$"83%?8#$('4$"&8#
G*,9%$.*%6>B?G6%?@WVGB=>B%D=K6BC%?>KVG@=B?V>%#*4$"&8%%
,$%$.*%+*3"88"83%&2%$."#%5,8',7%"847'9"83%,77%$*_$%'89*(%#'+.*,9"83#%$.*(*"8%%
+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1
?8#/*4$%$&&7%+*2&(*%'#*L%7&&U"83%2&(%9,5,3*9L%7&&#*L%,89%5"##"83%/,($#1%%?2%,8E%/(&+7*5#%,(*%2&'89L%
9&%8&$%'#*%$&&7%'8$"7%(*/,"(*91%%A,5,3*9%&(%5"##"83%/,($#%4,8%"84(*,#*%("#U%&2%*7*4$("4%#.&4U1
T&(U/"*4*%,89%T&(U%=(*,%D*$%X/
1. Designate a work area that is clean and well lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Before spraying, mask nearby objects not being
sprayed and lay cloths (not included) on the floors.
D/(,E%F'8%D*$'/%,89%=9Z'#$5*8$
@,$*(",7%W(*/,(,$"&8%,89%K"77"83
G?D[%VK%6eW<VD?V>%N%%
AV%>VB%DWG=C%K<=@@=Y<6%<?iX?AD1
>&$*- B."#%D/(,E%F'8%4,8%&87E%+*%'#*9%2&(%#/(,E"83%),$*(%+,#*9%&(%
&"7N+,#*9%7&)%\"#4&#"$E%/,"8$#L%#$,"8#%,89%\,(8"#.*#1
?@WVGB=>Bj Before THINNING,
check the viscosity of FLUID.
1. Carefully strain the material through
a paint strainer or a piece of cheesecloth.
2. Fully submerge the included Viscosity
Cup into the material.
3. Lift the Cup out of the material and
time how many seconds it takes for it
to completely run out of the cup.
4. Refer to Viscosity Chart%for recommended
times for different materials.
@,$*(",7 B"5*%"8%#*4&89#
Water-Based Paint
Primer
Oil-Based Paint
Varnish
Sealer
Wood Stain
<50
!"#4&#"$E%;.,($
>&$*- Proper material mixture is essential.
Follow the manufacturer’s directions for thinning
instructions.
Most materials will spray easily if
they are thinned properly.
5. If necessary, thin the material according to
manufacturer’s directions and mix thoroughly.
6. Check viscosity. Thin and check until
proper viscosity is achieved.
7. Fill the Cup no higher than 48 oz. mark.
8. Replace the Cup.
Page 11K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCVW6G=B?V>@=?>B6>=>;6 D6BXW
K,8%W,$$*(8%
1. Loosen Lock Knob.
2. Turn Air Cap until desired pattern is selected.
3. Tighten Lock Knob.
c&("^&8$,7;&8*
!*($"4,7
B*#$%D/(,E
T=G>?>Fj- %A,5,3*9%&(%5"##"83%/,($#%4,8%"84(*,#*%("#U%&2%*7*4$("4%
#.&4U1%%A&%8&$%&/*(,$*%D/(,E*(%)"$.%9,5,3*9%&(%5"##"83%/,($#1
1. Plug the Spray Gun into an electrical outlet.
2. Spray on piece of scrap material in short
bursts, then check consistency.
3. Adjust the Fluid Control Knob until
proper flow is achieved.
K7'"9%
;&8$(&7%
[8&+
B&&%;&,(#*%
a;7&#*%
[8&+b
B&&%K"8*%
aV/*8%
[8&+b
;&((*4$
Page 12 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC VW6G=B?V> @=?>B6>=>;6D6BXW
D/(,E"83%B*4.8"J'*
T.*8%2"(#$%2"77*9L%$.*%#/(,E*(%5,E%$,U*%'/%,%#.&($%$"5*%,2$*(%
$.*%$("33*(%"#%9*/(*##*9%$&%/("5*%,89%#$,($%#/(,E"831
?@WVGB=>B- Proper spraying technique
is ESSENTIAL to achieve good results.
1. First, prepare the Spray Gun according to
the instructions under D/(,E%F'8%D*$'/%,89%
=9Z'#$5*8$%&8%/,3*%MI.
2. Keep the Spray Gun upright and
at a right angle to the workpiece -
D**%K"3'(*%Y1
%
?84&((*4$%
F'8%
=837*
Do not pivot your wrist
or wave the gun like a
fan towards the wall.
;&((*4$%F'8%=837*
Move your arm, not just your wrist.
Point gun directly towards the surface and
maintain an even, steady distance and speed.
K"3'(*%Y-%%D/(,E%F'8%=837*%N%$&/%\"*)
>VB?;6- Do not stop when spraying.
Spraying materials will start to set and dry as
soon as they come in contact with the air.
3. Depress Trigger fully and move Spray Gun
in parallel strokes to the workpiece.
4. Keep the distance from the workpiece
between 2" and 12".
5. To avoid paint build up:
a. Apply two thin coats rather than one thick
coat. Overlap 1/3 to 1/2 on second coat.
b. Start moving the Spray Gun before
fully depressing Trigger.
c. Fully depress Trigger before
contacting the workpiece.
d. When finished with the stroke, release the
Trigger while still moving the Spray Gun and
after passing the workpiece - see Figure C.
>&$*- Doing this will produce a smoother finish.
Do not stop moving the Spray Gun while spraying.
If the Spray Gun stops even briefly while spraying
the paint will build up and run down the workpiece.
689
D$(&U*
Y*3"8%
D$(&U*
G*7*,#*%
B("33*(
A*/(*##
B("33*(
K"3'(*%;-%%W,"8$%D$(&U*%B("33*("83%N%$&/%\"*)
>&$*- The stroke speed and
Fluid Control Knob adjustment will determine
how much paint is being applied.
6. [**/%;'/%2"77*9%.,72N),E%2'77%
$&%/(*\*8$%#/,$$*("831
7. To prevent accidents, after use, release Trigger,
unplug the tool, safely discharge any residual
air pressure, and release Trigger again.
8. ;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%
,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%
5&(*%$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%
47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%%
Page 13K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCVW6G=B?V>@=?>B6>=>;6 D6BXW
;7*,8"83
G?D[%VK%6eW<VD?V>%N%%
AV%>VB%DWG=C%K<=@@=Y<6%<?iX?AD1
a. K&77&)%#&7\*8$%5,8'2,4$'(*(]#%47*,8%'/%
"8#$('4$"&8#%,89%#,2*$E%/(*4,'$"&8#1
b. ?2%4&77*4$"83%27'#.*9%#&7\*8$#%"8%
5*$,7%4&8$,"8*(L%$(,8#2*(%$&%8&85*$,7%
4&8$,"8*(L%,89%27'#.%5*$,7%4&8$,"8*(1
c. T&(U%2,(%,),E%2(&5%,8E%"38"$"&8%
#&'(4*#%"8%,%\,/&(%2(**%,(*,1
d. [**/%47,##%=Y;%2"(*%*_$"83'"#.*(%8*,(+E1
D&7\*8$%D*7*4$"&8
K&77&)%$.*%/,"8$%,89%#&7\*8$%5,8'2,4$'(*(]#%(*4&55*89,$"&8#%2&(%47*,8"83L%#&7\*8$%$E/*L%,89%9"#/&#,71
=2$*(%6\*(E%X#*
>VB?;6-%%A&%8&$%"55*(#*%="(%;&5/(*##&(%"8%#&7\*8$1%%%
1. Unplug the Spray Gun from its electrical outlet.
2. Use solvent recommended by paint manufacturer.
3. Designate a container for spent solvent.
4. Separate Spray Gun from Air Compressor. Store
Air Compressor away from cleaning area.
5. Remove Cup. Carefully scrape paint out of
Cup and dispose of excess paint properly.
6. Fill Cup 1/4 to 1/2 full with solvent
(sold separately) . Replace Cup, then
shake Spray Gun for several seconds.
7. Remove Cup, pour solvent into spent
solvent container and wipe away any paint
residue from Cup with clean cloth.
8. Fill Cup 1/4 to 1/2 full with solvent. Replace Cup.
9. Plug the Spray Gun into an electrical outlet.
10. Point Spray Gun at interior side of spent solvent
container. Depress Trigger and slightly shake
Spray Gun while spraying solvent into the
container. Once the Cup is empty, repeat the
process until the solvent comes out clean.
11. Unplug the Spray Gun from its electrical outlet.
12. Point the Spray Gun into the spent
solvent container and depress the Trigger
again to make sure no air remains.
13. Remove Cup and Suction Tube.
14. Remove Lock Ring, Air Cap, Air Valve and Nozzle.
<&4U%
G"83
="(%
;,/
="(%
!,7\*
>&^^7*
15. Inspect parts and soak in solvent as
necessary. Use brushes and toothpicks
(sold separately) to remove any paint.
>&$*- To prevent damage, do not use
metal objects to clean parts.
16. Wipe down Spray Gun Body with
a clean cloth and solvent.
17. Make sure all parts are dry and free from
residual paint, then reassemble Spray Gun.
>VB?;6- Do not use any kind of lubricant. The
lubricant will mix with paint, causing poor results.
D/*8$%D&7\*8$%A"#/&#,7
After cleaning, dispose of spent solvent according to the solvent manufacturer’s
directions and local hazardous waste standards.
Page 14 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC VW6G=B?V> @=?>B6>=>;6D6BXW
X#*(N@,"8$*8,84*%?8#$('4$"&8#
W(&4*9'(*#%8&$%#/*4"2"4,77E%*_/7,"8*9%"8%$."#%5,8',7%%
5'#$%+*%/*(2&(5*9%&87E%+E%,%J',7"2"*9%$*4.8"4",81
BV%WG6!6>B%D6G?VXD%?>kXGC-%
A*$,4.%$.*%,"(%#'//7E%,89%#,2*7E%9"#4.,(3*%,8E%(*#"9',7%,"(%/(*##'(*%"8%$.*%$&&7%
+*2&(*%/*(2&(5"83%,8E%"8#/*4$"&8L%5,"8$*8,84*L%&(%47*,8"83%/(&4*9'(*#1
BV%WG6!6>B%D6G?VXD%?>kXGC%KGV@%BVV<%K=?<XG6-%%A&%8&$%'#*%9,5,3*9%*J'"/5*8$1%%
?2%,+8&(5,7%8&"#*L%\"+(,$"&8L%&(%7*,U"83%,"(%&44'(#L%.,\*%$.*%/(&+7*5%4&((*4$*9%+*2&(*%2'($.*(%'#*1
?8#/*4$"&8
>&$*- These procedures are in addition to the regular checks and maintenance
explained as part of the regular operation of the air-operated tool.
Y6KVG6%6=;c%XD6L inspect the general condition of the tool. Check for:
loose screws,
misalignment or binding of moving parts,
clogged nozzle or fluid tip,
cracked or broken parts, and
any other condition that may affect its safe operation.
D$&(,3*
Store in a dry, secure area out of reach of children.
Page 15K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCVW6G=B?V>@=?>B6>=>;6 D6BXW
="(%K"7$*(%@,"8$*8,84*
1. Remove four screws on back of Spray Gun.
2. Remove housing and Air Filter.
3. Wash filter in warm water and mild detergents
several times. Rinse. Squeeze out excess
water and allow it to dry completely.
4. Install cleaned filter and replace housing and screws.
Page 16 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC VW6G=B?V> @=?>B6>=>;6D6BXW
B(&'+7*#.&&$"83%N%D/(,E%W,$$*(8%A",38&#"#
>&$*- The drawings on the left below resemble symptoms of spray pattern problems.
Refer to the accompanying possible causes and likely solutions to the right.
W(&+7*5 W&##"+7*%;,'#*# <"U*7E%D&7'$"&8#
Heavy center
pattern
1. Fluid Control Knob
needs adjustment.
2. The paint is too thick.
1. Adjust Fluid Control Knob.
2. Thin paint according to the
manufacturer’s instructions.
Light center
pattern
1. Fluid Control Knob
needs adjustment.
2. Dried paint on Nozzle.
1. Adjust Fluid Control Knob.
2. Use a nonmetallic point to clean Nozzle.
Heavy top/
bottom pattern
1. Air Cap plugged.
2. Lock Ring loose.
3. Dried paint on Nozzle.
1. Clean Air Cap.
2. Tighten Lock Ring.
3. Use a nonmetallic point to clean Nozzle.
Pattern on right
or left only
Dried paint or debris on Nozzle. Use a nonmetallic point to clean Nozzle.
Jerky or
Fluttering Spray
1. Loose or damaged Air Cap.
2. Paint level low.
3. Cup and/or Lid loose.
4. Clogged Check Valve.
1. Tighten Air Cap.
2. Refill paint Cup.
3. Tighten Cup and/or Lid.
4. Clean Check Valve.
K&77&)%,77%#,2*$E%/(*4,'$"&8#%).*8*\*(%9",38&#"83%&(%#*(\"4"83%$.*%$&&71%%%
A"#4&88*4$%,"(%#'//7E%+*2&(*%#*(\"4*1
Page 17K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCVW6G=B?V>@=?>B6>=>;6 D6BXW
F*8*(,7%B(&'+7*#.&&$"83%;.,($
W(&+7*5 W&##"+7*%;,'#*# <"U*7E%D&7'$"&8#
Sputtering Spray 1. Low paint level.
2. Cup tipped.
3. Cup and/or Lid loose.
4. Clogged Check Valve.
1. Refill.
2. Hold upright.
3. Tighten Cup and/or Lid.
4. Clean Check Valve.
Will Not Spray 1. No power at Spray Gun.
2. Fluid too thick.
3. Cup and/or Lid loose.
4. Clogged Check Valve.
1. Check Power Cord.
2. Thin fluid.
3. Tighten Cup and/or Lid.
4. Clean Check Valve.
Overspray
(Paint drifting to
unintended objects.)
1. Improper application speed.
2. Improper distance from workpiece.
3. Airflow too high.
4. Clogged Check Valve.
1. Move moderately and parallel.
2. Adjust distance.
3. Reduce Airflow.
4. Clean Check Valve.
K&77&)%,77%#,2*$E%/(*4,'$"&8#%).*8*\*(%9",38&#"83%&(%#*(\"4"83%$.*%$&&71%%%
A"#4&88*4$%,"(%#'//7E%+*2&(*%#*(\"4*1
Page 18 K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1 Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BC VW6G=B?V> @=?>B6>=>;6D6BXW
W<6=D6%G6=A%Bc6%KV<<VT?>F%;=G6KX<<C
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
W,($#%<"#$%,89%A",3(,5
W,($#%<"#$
W,($ A*#4("/$"&8 i$E
1 Lock Ring 1
2 Air Cap 1
3 Air Valve 1
4 Nozzle 2.5mm 1
5 Fluid Needle 1
6 Fluid Needle Bar Unit 1
7 Fluid Needle Spring 1
8 Screw 2
9 Gun Body 1
10 Trigger Connector 1
11 O Ring 1
12 Trigger Adjusting Knob 1
13 Trigger Adjusting Knob Spring 1
14 Trigger 1
15 Gasket 1
16 Suction Tube 1
17 Cup 48 oz 1
18 Power Cord Clamp 1
W,($ A*#4("/$"&8 i$E
19 Screw 2
20 Terminal Block 1
21 Lead Wire 1
22 Switch 1
23 Housing 2
24 Power Cord Sheath 1
25 Power Cord 1
26 Motor Cover 1
27 Screw 12
28 Air Filter 1
29 Motor 1
30 Damping Washer 1
31 Motor Holder 1
32 Push Rod Spring 1
33 Push Rod 1
34 Clip 1
35 Clip Pin 1
Page 19K&(%$*4.8"4,7%J'*#$"&8#L%/7*,#*%4,77%MNOOONOPPNQRSR1Item 64934
NOTICE
;7*,8%$.*%D/(,E%F'8%,89%;'/%?@@6A?=B6<C%,2$*(%6!6GC%'#*%,89%).*8%"$%)"77%+*%"97*%2&(%5&(*%
$.,8%HI%5"8'$*#1%%A*7,E*9%&(%"8,9*J',$*%47*,8"83%)"77%/*(5,8*8$7E%47&3%$.*%D/(,E%F'81%
T,$*(N+,#*9%/,"8$%.,(9*8#%J'"4U7E%,89%/*(5,8*8$7E%"8#"9*%D/(,E%F'81
D=K6BCVW6G=B?V>@=?>B6>=>;6 D6BXW
G*4&(9%W(&9'4$]#%D*(",7%>'5+*(%c*(*-%
>&$*- If product has no serial number, record month and year of purchase instead.
>&$*- Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.
=##*5+7E%A",3(,5
2
3
4
5
1
6
7
8
9
1 0
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
2 0
2 1
2 2
2 3
2 4
2 5
2 6
2 7
2 8
2 9
3 0
3 1
3 2
3 3
3 4
3 5
26541AgouraRoad•Calabasas,CA91302•1-888-866-5797
<"5"$*9%SI%A,E%T,((,8$E
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Avanti Item 64934 Owner's manual

Category
Power fine-spray systems
Type
Owner's manual
This manual is also suitable for

Avanti Item 64934 is a versatile tool designed to meet the needs of both DIY enthusiasts and professional painters. With its powerful motor and precision spray gun, it delivers exceptional performance for a wide range of painting projects. Here are some key capabilities of this device:

• Precise Spraying: The spray gun features adjustable spray patterns and flow rate control, allowing you to achieve the perfect finish for any surface.

• Durability: Made with high-quality materials, Avanti Item 64934 is built to withstand the demands of frequent use and harsh environments.

• Easy Maintenance: Cleaning and maintaining the spray gun is a breeze, ensuring minimal downtime and extending the life of your tool.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI