Wyndham Collection WCAT102340P11BN Installation guide

WCAT102340P11BN
Brand
Wyndham Collection
Model
WCAT102340P11BN
Category
Sanitary ware
Type
Installation guide
WC-AT102340P11
Tub Filler
Installation Instructions
WC-AT102340P11
All information is based on the latest product information available at the time of publication. Product
characteristics, packaging, and availability may change at any time without notice.
Installers, please keep these instructions for the consumer. They contain important information.
ATTENTION
The cartridges in the main body have been tested and adjusted by the factory.
Do not take the cartridges apart.
A platform may be built by the installer. No platform is included.
Clean the water supply pipe before installing to avoid jamming.
Connect the hot water supply on the left and the cold water supply on the right.
Flow pressure: Min: 0.05MPa Max: 1.60MPa
Recommended pressure: 0.1MPa to 0.8MPa (1 to 8 bar)
TO KEEP THE FAUCET LOOKING BEAUTIFUL
FOLLOW THESE SIMPLE CARE INSTRUCTIONS REGULARLY
Rinse the faucet clean with clean water.
Do not use any cleaning agents containing abrasive or coated abrasive ingredients.
Do not use any cleaning agents containing acids, polish abrasives, or harsh cleaner or soaps.
IF HEAVY CLEANING IS REQUIRED, THE FOLLOWING
PROCEDURES ARE RECOMMENDED
Clean the faucet with water.
Remove tough surface lm and build-up with soft liquid cleaning agents, clear liquid glass
cleaners, non-acidic, non-abrasive gentle liquid, fully dissolved powder cleansers mixed
according to manufactures directions, or non-abrasive liquid polishers.
After cleaning, make sure to rinse suciently with clean water in order to completely remove
any remaining cleanser and dry with a soft cotton cloth.
1
1
2
3
2
3
4
WC-AT102340P11
ROUGH-IN DIMENSIONS
OPERATION INSTRUCTIONS
3 - ø 7/16”
1-7/8”
3-3/8”
2-7/8”
3”
ø1-1/8”
8-1/4”
1”
37-3/8”
12-1/2”
ø3-1/2”
1/2”-14NPT
9”
31-1/8”
30-3/4”
25-5/8”
ø2”
Min 2-3 /8”
3 - ø1/2”
Min ø4-1/2”
Hose Length
is 58-1/2”
WC-AT102340P11
For easy installation read these instructions carefully.
1
2
3
Tighten the nut and
fasten the seat.
Adjust all screws and
keep it level.
Hot
Hot
Cold
Cold
Two outlets
Valve platform
1
2
When inserting the valve into the oor,
check the location of outlets and
the bath (see g).
Glue the tile and leave
the hole ø75-ø89.
Remove the safe cover.
4
9 8
Insert the main body
into the seat, tighten
the nut and cover the
escutcheon.
5
6
7
Floor or bath platform
(A platform may be built by
the installer or the valve is
installed in the oor)
Floor or bath platform
(A platform may be built by
the installer or the valve is
installed in the oor)
Floor or bath platform
(A platform may be built by
the installer or the valve is
installed in the oor)
3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Wyndham Collection WCAT102340P11BN Installation guide

WCAT102340P11BN
Brand
Wyndham Collection
Model
WCAT102340P11BN
Category
Sanitary ware
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents