Sony WLA-NWB1 Owner's manual

Category
Bluetooth music receivers
Type
Owner's manual
WLA-NWB1 [GB,FR,DE,ES,IT] 2-895-766-13(1) WLA-NWB1 [GB,FR,DE,ES,IT] 2-895-766-13(1)
Bluetooth™
Audio Transmitter
© 2006 Sony Corporation
WLA-NWB1
2-895-766-13 (1)
Operating Instructions
GB
Mode d’emploi
FR
Bedienungsanleitung
DE
Manual de instrucciones
ES
Istruzioni per l’uso
IT
Printed in China
WLA-NWB1 [GB] 2-895-766-12(1)
2
GB
WLA-NWB1 [GB] 2-895-766-12(1)
WARNING
To reduce the risk of re or
electric shock, do not expose this
apparatus to rain or moisture.
Do not install the appliance in a conned
space, such as a bookcase or built-in cabinet.
To reduce the risk of re, do not cover the
ventilation of the apparatus with newspapers,
tablecloths, curtains, etc. And do not place
lighted candles on the apparatus.
To reduce the risk of re or electric shock, do
not place objects lled with liquids, such as
vases, on the apparatus.
Hereby, Sony Corp., declares that this
equipment is in compliance with the essential
requirements and other relevant provisions
of Directive 1999/5/EC.
For details, please access the following URL:
http://www.compliance.sony.de/
e Bluetooth word mark and logos are
owned by the Bluetooth SIG, Inc. and any
use of such marks by Sony Corporation is
under license.
Other trademarks and trade names are those
of their respective owners.
In order to comply with FCC radio-
frequency radiation exposure guidelines for
an uncontrolled exposure, this device and its
antenna must not be co-located or operating
in conjunction with any other antenna or
transmitter.
Disposal of Old Electrical & Electronic
Equipment (Applicable in the European
Union and other European countries with
separate collection systems)
is symbol on the product or
on its packaging indicates that
this product shall not be treated
as household waste. Instead
it shall be handed over to the
applicable collection point
for the recycling of electrical
and electronic equipment. By
ensuring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product.
e recycling of materials will help to conserve
natural resources. For more detailed information
about recycling of this product, please contact
your local Civic Oce, your household
waste disposal service or the shop where you
purchased the product.
For Customers in the USA
INFORMATION:
is equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. ese limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
is equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment o and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit dierent from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
WLA-NWB1 [GB] 2-895-766-12(1)
WLA-NWB1 [GB] 2-895-766-12(1)
3
GB
GB
You are cautioned that any changes or
modications not expressly approved in this
manual could void your authority to operate
this equipment.
is device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference, and (2) this
device must accept any interference received,
including interference that may cause
undesired operation.
is equipment complies with FCC radiation
exposure limits set forth for uncontrolled
equipment and meets the FCC radio
frequency (RF) Exposure Guidelines in
Supplement C to OET65. is equipment
has very low levels of RF energy that it is
deemed to comply without testing of specic
absorption ratio (SAR).
For Customers in CANADA
is Class B digital apparatus complies with
Canadian ICES-003.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference that
may cause undesired operation of the device.
e installer of this radio equipment must
ensure that the antenna is located or pointed
such that it does not emit RF eld in excess
of Health Canada limits for the general
population; consult Safety Code 6, obtainable
from Health Canadas website
www.hc-sc.gc.ca/rpb.
Table of Contents
Features ..................................... 4
Basic operation of Bluetooth
devices ..........................................5
Getting Started
Location and
Function of Parts ................... 6
Connecting to a Walkman ....... 7
Pairing ....................................... 8
What is pairing? ............................8
Pairing procedures........................8
On Indicators .......................... 10
Listening to music
Bluetooth Connecting /
Playing back ......................... 11
Controlling by the Remote .... 13
Additional Information
What is Bluetooth
technology? .......................... 14
Precautions ............................. 14
Troubleshooting ..................... 16
Initializing this unit ............... 18
Specications .......................... 19
WLA-NWB1 [GB] 2-895-766-12(1)
4
GB
WLA-NWB1 [GB] 2-895-766-12(1)
Features
is unit is an audio transmitter using Bluetooth
technology.
You can enjoy music wirelessly by transmitting the audio signals
to a Bluetooth receiving device (headset, car stereo, speaker, stereo
component system, etc.)*, if you connect this unit to the Walkman
with the WM-PORT* (22 pin).
* Bluetooth receiving devices are required to support A2DP (Advanced Audio
Distribution Prole).
* WM-PORT is a dedicated multiple connector for connecting accessories to your
Walkman.
is units features are as follows:
Audio transmission using Bluetooth wireless technology.
Can be used with any Walkman with a WM-PORT (22 pin).
AVRCP (Audio/Video Remote Control Prole) supported
Allows basic operation of a Walkman by Bluetooth headsets*, etc.
Allows volume control (+/-) operation of Bluetooth speakers*, etc., by a
Walkman.
* AVRCP compatibility required
* AVRCP (Vol +/-) compatibility required
No need to charge; receives power from Walkman.
Walkman with
WM-PORT (22 pin)
This unit
Bluetooth headset, etc.
Tip
For details on Bluetooth technology, see page 14.
For details on available Bluetooth devices, visit the following web sites:
USA: http://www.sony.com/walkmansupport/
Canada: http://www.sony.ca/ElectronicsSupport/
Europe: http://www.sonydigital-link.com/DNA/
China: http://service.sony.com.cn/KB/
Taiwan: http://www.twsupport.css.ap.sony.com/
Korea: http://scs.sony.co.kr/walkman/
Other countries or areas: http://www.css.ap.sony.com/
5
GB
Basic operation of Bluetooth devices
e following example describes how you can transmit music played
on a Walkman connected to this unit, and listen on a Bluetooth
receiving device (headset).
Pairing
Enables a Bluetooth receiving device and this unit to recognize one another.
You do not need to recognize one another next time if you did once.
Walkman with
WM-PORT (22 pin)
This unit
Bluetooth receiving device (headset)
Bluetooth connecting
Turn on the Bluetooth receiving device and play the Walkman. Bluetooth
connection is established automatically.
Listening to music
You can enjoy listening to music played on your Walkman connected to this
unit through the Bluetooth receiving device.
For more details, see page 11.
For more details, see page 11.
For more details, see page 8.
WLA-NWB1 [GB] 2-895-766-12(1)
6
GB
WLA-NWB1 [GB] 2-895-766-12(1)
Getting Started
Location and Function of Parts

WM-PORT (22 pin)
Connects to the
WM-PORT of a Walkman
(page 7).

Indicator
Indicates this unit’s status
(page 10).

Power button
Performs the following:
Turning on/o of this unit
(page 7).
Pairing (page 8).
Initializing this unit
(page 18).

MODE switch
Selects the transmission
mode by sliding the switch
to 1 or 2 (page 12).
Front Rear
WLA-NWB1 [GB] 2-895-766-12(1) WLA-NWB1 [GB] 2-895-766-12(1)
7
GB
Connecting to a Walkman
Connect this unit to the WM-PORT of a Walkman rmly.
To turn on this unit
Connect this unit to the Walkman, then the power of this unit will
turn on automatically. If the power of this unit is o while the unit is
connected to the Walkman, press and hold the unit’s power button
for about 2 seconds to turn it on. When this unit turns on, the
indicator ashes twice.
To turn off this unit
To turn o this unit, press and hold this unit’s power button for
about 2 seconds. e indicator ashes once and this unit turns o.
Tip
Maximum Communication time or standby time may vary depending on your
Walkman. For details, visit the following web sites:
USA: http://www.sony.com/walkmansupport/
Canada: http://www.sony.ca/ElectronicsSupport/
Europe: http://www.sonydigital-link.com/DNA/
China: http://service.sony.com.cn/KB/
Taiwan: http://www.twsupport.css.ap.sony.com/
Korea: http://scs.sony.co.kr/walkman/
Other countries or areas: http://www.css.ap.sony.com/
Notes
To listen to music from the headphone jack of the Walkman, disconnect this unit
from the Walkman.
While this unit is turned on, it consumes power from the Walkman. We
recommend turning o this unit when not using the Bluetooth function.
If you turn o this unit while the Walkman is playing back, playback will stop.
ere is no need to charge this unit as it will receive power from the connected
Walkman. It is recommended to check the Walkmans remaining battery before using.
Depending on the Walkman model, you may not be able to connect the
headphone to it when this unit is connected to the Walkman.
WM-PORT (22 pin)
Power button
WLA-NWB1 [GB] 2-895-766-12(1)
8
GB
WLA-NWB1 [GB] 2-895-766-12(1)
Pairing
What is pairing?
Bluetooth devices need to be “paired” with each other beforehand.
Once Bluetooth devices are paired, there is no need for pairing
again, except in the following cases:
Pairing information is deleted aer repair, etc.
is unit is paired with 9 or more receiving devices.
is unit can be paired with up to 8 Bluetooth receiving device. If a
new device is paired aer 8 devices have been paired, the device whose
latest connection time is the oldest among the 8 paired devices is
replaced by the new one.
is unit is initialized.
All pairing information is deleted (page 18).
Pairing procedures
1
Connect this unit to the Walkman (page 7).
e power of this unit turns on.
2
Press
and hold the power button of this unit for about 2 seconds to turn it
off.
3
Place this unit and the Bluetooth receiving device to be paired
together within 1 m.
4
Set
the Bluetooth receiving device to enter “Pairing in process.
(See the operating instructions supplied with the Bluetooth receiving
device.)
Note
Passcode* of this unit is xed at “0000.” Depending on the Bluetooth receiving
device, it may be necessary to input the passcode (in this case, “0000”). is
unit cannot be paired with a Bluetooth receiving device whose passcode is not
“0000.
* Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.
WLA-NWB1 [GB] 2-895-766-12(1)
WLA-NWB1 [GB] 2-895-766-12(1)
9
GB
5
Press
and hold the power button of this unit for more than about 7
seconds to enter “Pairing in process.
Aer about 2 seconds, the indicator will ash twice but keep
pressing the power button.
When the indicator of this unit ashes quickly, stop pressing it.
is unit enters “Pairing in process.
is units indicator status will vary as follows, and pairing is
established with the Bluetooth receiving device.
Indicator ashes quickly: Pairing in process
Indicator ashes when responding to the Bluetooth receiving device.
(Paring successful)
Indicator ashes (at about 5-second intervals): Connectable
Notes
“Pairing in process” of this unit is released aer about 5 minutes. If pairing is
not established within about 5 minutes, repeat the above procedure from step
4
.
To enter “Pairing in process,” you need to turn o the power of this unit rst.
When not completed paring
Repeat the procedure from step
2
.
To quit “Pairing in process”
Press and hold the power button of this unit for about 2 seconds to
turn o this unit.
Tip
When paring this unit with a number of Bluetooth receiving devices, repeat steps 2
and 5 for each device individually.
Note
Depending on the Bluetooth receiving device, the unit may not enter “Connectable
automatically. In this case, see the operating instructions supplied with the device.
WLA-NWB1 [GB] 2-895-766-12(1)
10
GB
On Indicators
Status Indicator
Power on Flashes twice
Power o Flashes once
Pairing in process Flashes quickly
Paring successful Flashes twice
Connecting in process Flashes (at about
1-second
intervals)
Connecting successful Flashes twice
Connecting
Flashes slowly (at about 5-second intervals)
Connectable Flashes
(at about 5-second intervals)
WLA-NWB1 [GB] 2-895-766-13(1)
11
GB
Listening to music
Bluetooth Connecting / Playing back
You can listen to music of the Walkman connected to this unit on the
Bluetooth receiving device (headset, etc.).
Before starting operation, complete pairing this unit and the
Bluetooth receiving device (page 8).
1
Set the Bluetooth receiving device to “Connectable” for the
Bluetooth connection.
(See the operating instructions supplied with
the Bluetooth receiving device.)
2
Connect
this unit to the Walkman then turn on the Walkman.
is units indicator status will vary as follows, and the Bluetooth
connection between this unit and the Bluetooth receiving device
is established.
Indicator ashes twice: Power is on
Indicator ashes (at about 1-second intervals): Connecting in process
Indicator ashes twice: Connecting successful
Indicator ashes slowly (at about 5-second intervals): Connecting
If the Bluetooth connection is not established within 5 minutes,
this unit automatically turns itself o. In this case, turn it on
again by pressing and holding the power button for about 2
seconds.
Note
If you want to establish the Bluetooth connection with a Bluetooth device that
is paired before either of the last two devices recognized, turn on the unit and
establish the Bluetooth connection from the Bluetooth device while the units
indicator ashes slowly from 10 to 13 times (for about 10-13 seconds). If the
problem persists, pair the devices again.
Continued
WLA-NWB1 [GB] 2-895-766-13(1)
12
GB
WLA-NWB1 [GB] 2-895-766-13(1)
3
Start
playback on the
Walkman
connected to this unit.
e music of the Walkman is played back on the Bluetooth
receiving device.
Tip
You can control the volume on the Bluetooth receiving device.
Notes
Depending on your Walkman, when the Walkman is in Sleep status, you may
need to keep pressing the play button in order to start playback.
Even if you control the volume on the Walkman, sound from the Bluetooth
receiving device will not change. If the Bluetooth receiving device is supported by
AVRCP (Vol +/-), you can control its volume. (For more details, see page 13.)
When this unit establishes the Bluetooth connection with the Walkman, AVLS
(Automatic Volume Limiter System) is deactivated and beep sounds are not
emitted.
If this unit and the Bluetooth receiving device become out of range and
the Bluetooth connection terminates, repeat the procedure from step 1.
Note, however, that if the unit and the Bluetooth receiving device come into
connectable range again within about 10 minutes, Bluetooth connection will be
reestablished automatically.
When you listen to FM broadcast received by a Walkman with a built-in
FM tuner through the Bluetooth receiving device, make sure to connect the
headphone to the Walkman, as the headphone cord works as an antenna,
otherwise FM signals cannot be received.
If the recording level of audio data on the Walkman is too high, the output sound
quality from the Bluetooth receiving device, may not meet the user customized
settings, e.g., “Equalizer” etc.
Playback through a Bluetooth connection may cause noise, sound break, or
playback speed change depending on the location and the usage (page 14).
About the MODE switch
You can select the sound quality or wireless communication stability preferentially.
MODE 1: Sound quality takes priority.
MODE 2: Reception stability takes priority.
Notes
When you set the MODE switch to MODE 1, and experience sound breaks, set
to MODE 2.
Sound break may occur depending on your Bluetooth receiving device when
switching between MODE 1 and 2.
WLA-NWB1 [GB] 2-895-766-12(1)
WLA-NWB1 [GB] 2-895-766-12(1)
13
GB
Controlling by the Remote
When connecting (Bluetooth connecting) to devices that
support AVRCP (Audio/Video Remote Control Prole)
You can control the Walkman using the control button of the Bluetooth headset, also
adjust the volume of the Bluetooth speaker using the control button of the Walkman.
For details, see the operating instructions supplied with the Bluetooth devices.
Before starting remote control operation, check that step 1 and 2 of
“Bluetooth Connecting / Playing back” are completed (page 11).
Remote control for the Walkman by the Bluetooth receiving device.
Remote control
(play, stop., etc.)
Headset with AVRCP
Tip
When you stop playing back the Walkman, this unit enters “Connectable.” While in
Connectable,” you can turn on the Walkman by using the Bluetooth receiving device.
Remote control for the Bluetooth receiving device by the Walkman.
Speaker with AVRCPRemote control
(Vol +/–., etc.)
Notes
You may not be able to control the Bluetooth receiving device by the remote
control depending on the state of the Walkman.
Even if you control the volume on the Walkman, the volume of the Bluetooth
receiving device, such as a headset, does not change.
When operating the Walkman by remote control, do not cover this unit with hands.
When operating the Walkman for the Bluetooth receiving device remote control,
point this unit toward the Bluetooth receiving device.
You may not be able to change the volume by the remote control from the
Walkman depending on your Bluetooth receiving device.
Do not cover this
unit with hands.
Point this unit toward the
Bluetooth receiving device.
WLA-NWB1 [GB] 2-895-766-12(1)
14
GB
WLA-NWB1 [GB] 2-895-766-12(1)
Precautions
On Bluetooth communication
Bluetooth wireless technologyBluetooth wireless technology
operates within a range of about 10
meters (about 30 feet). Maximum
communication range may vary
depending on obstacles (person,
metal, wall, etc.) or electromagnetic
environment.
This unit
Limited performance
Optimal performance
Steel cabinet
e following conditions may cause
noise, sound break or playback speed
change.
When using inside the metal bag.
When using inside the backpack or
shoulder bag.
A device using 2.4 GHz frequency,
such as a wireless LAN device,
cordless telephone, or microwave
oven, is in use near this unit.
Because Bluetooth devices and wireless
LAN (IEEE802.11b/g) use the same
frequency, microwave interference may
occur and resulting in communication
speed deterioration, noise, or invalid
connection if this unit is used near a
wireless LAN device. In such a case,
perform the following.
Additional Information
What is Bluetooth
technology?
Bluetooth wireless technology is a short-
range wireless technology that enables
wireless data communication between
digital devices, such as a computer
or digital camera. Bluetooth wireless
technology operates within a range of about
10 meters (about 30 feet).
You do not need to use a cable for
connection since Bluetooth technology is
a wireless technology, nor is it necessary
for the devices to face one another, such
is the case with infrared technology. For
example, you can use such a device in a bag
or pocket.
Bluetooth technology is an international
standard supported by thousands of
companies all over the world, and employed
by various companies worldwide.
Communication System
and Compatible Bluetooth
Profile of this unit
Prole is standardization of the function
for each Bluetooth device specication.
is unit supports the following
Bluetooth version and proles:
Communication System: Bluetooth
Specication version 2.0
Compatible Bluetooth Prole:
A2DP (Advanced Audio Distribution
Prole)
AVRCP (Audio/Video Remote Control
Prole)
WLA-NWB1 [GB] 2-895-766-12(1)
WLA-NWB1 [GB] 2-895-766-12(1)
15
GB
Install this unit and Bluetooth device as
near to each other as possible.
If this unit is used within about
10 meters (about 30 feet) of a wireless
LAN device, turn o the wireless
LAN device.
Due to the characteristic of Bluetooth
wireless technology, the sound played
on the Bluetooth device is slightly
delayed from the sound played on the
Walkman.
We do not take any responsibility
for leakage of information during
Bluetooth communication.
Connection with all Bluetooth devices
cannot be guaranteed.
A device featuring Bluetooth
function is required to conform to
the Bluetooth standard specied by
Bluetooth SIG, and be authenticated.
Even if the connected device
conforms to the above mentioned
Bluetooth standard, some devices
may not be connected or work
correctly, depending on the features
or specications of the device.
Depending on the device to be
connected, communication may take
some time.
On safety
Do not drop, hit, or otherwise expose
the unit to strong shock of any kind.
is could damage the product.
Do not disassemble or attempt to open
any parts of the unit.
On placement
Do not place the unit in any of theDo not place the unit in any of the
following locations.
Direct sunlight, near a heater, orDirect sunlight, near a heater, or
other extremely high-temperature
location
Dusty locationDusty location
An unsteady or inclined surfaceAn unsteady or inclined surface
Location exposed to large amounts
of vibration
Bathroom or other high-humidity
location
In a car subject to the direct rays of
the sun
Notes on using in a car
Do not attempt to connect this unit, or
to operate this unit, an audio output
device or a car radio while driving or
waiting at a trac signal.
Cleaning
Clean the unit with a so, dry cloth,
or a so cloth lightly moistened with
a mild detergent solution. Do not use
any type of solvent, such as alcohol
or benzene, which may damage the
nish.
Others
If you have any questions or problems
concerning this unit that are not
covered in this manual, please consult
your nearest Sony dealer.
WLA-NWB1 [GB] 2-895-766-12(1)
16
GB
WLA-NWB1 [GB] 2-895-766-12(1)
Troubleshooting
If you run into any problem using this unit, disconnect the
unit from the Walkman, then reconnect it aer a while (reset).
Furthermore, turn o the Walkman and the Bluetooth receiving
device then turn them on again. (For details on how to operate, see
the operating instructions supplied with either device.) Also check
the following list. Should any problem persist, consult your nearest
Sony dealer.
Symptom Cause / Remedy
is unit is not
turned on.
(or turns o
shortly aer
turning on.)

Press and hold the units power button for about 2
seconds.

Check the remaining battery of the Walkman. If
the remaining battery is not enough, charge the
Walkman.
No sound

Check the connection between this unit and the
Walkman.

Check that both this unit and the Bluetooth
receiving device are turned on.

Ensure that this unit is not too far from the
Bluetooth receiving device, or this unit is not
receiving interference from a wireless LAN, other
2.4 GHz wireless device, or microwave oven.

Pair this unit and the Bluetooth receiving device
again.
Low sound level

Turn up the volume of the Bluetooth receiving
device as high as possible to the extent that sound
is not distorted. For details on volume adjustment,
refer to the operating instructions supplied with the
Bluetooth receiving device.
Cannot change the
volume.

Change the volume on the Bluetooth receiving
device.
WLA-NWB1 [GB] 2-895-766-13(1)
WLA-NWB1 [GB] 2-895-766-13(1)
17
GB
Symptom Cause / Remedy
Distorted sound

Turn down the volume of the Bluetooth receiving
device to the point where the sound is no longer
distorted. For details on volume adjustment, refer
to the operating instructions supplied with the
Bluetooth receiving device.
Sound break,
noise or playback
speed change

Set the MODE switch to MODE 2.

If a device that generates electromagnetic radiation,
such as a wireless LAN, other Bluetooth device(s),
or a microwave oven is nearby, move away from
such sources.

Remove any obstacle between this unit and other
Bluetooth device or move away from the obstacle.

Locate this unit and other Bluetooth device(s) as
near as possible.

Re-position or re-orient this unit.

Re-position or re-orient other Bluetooth device.
Pairing cannot be
established.

Locate this unit and other Bluetooth device(s) as
near as possible.

Check if you input correct passcode (page 8).
Bluetooth
connection cannot
be established
with a device that
has been “paired
before.

is unit tries to connect with either of the last two
devices recognized before.
If you want to establish the Bluetooth connection
with a Bluetooth device that is paired before either
of the last two devices recognized, turn on the
unit and establish the Bluetooth connection from
the Bluetooth device while the unit’s indicator
ashes slowly from 10 to 13 times (for about 10-13
seconds). If the problem persists, pair the devices
again.

Pairing information may be deleted. Pair the device
again.
WLA-NWB1 [GB] 2-895-766-12(1)
18
GB
WLA-NWB1 [GB] 2-895-766-12(1)
Initializing this unit
You can reset this unit to its default and delete all pairing
information.
1
Connect the unit to the Walkman while pressing and holding the
power button on the unit.
2
Continue to press and hold the power button for more than about
15 seconds.
The indicator flashes 4 times, and this unit is reset to the default
setting. All pairing information is deleted.
WLA-NWB1 [GB] 2-895-766-12(1) WLA-NWB1 [GB] 2-895-766-12(1)
19
GB
Specifications
* Codec: Audio signal compression and
conversion format
* Subband Codec
Supplied accessories
Operating instructions (1)
“WALKMAN” and “WALKMAN”
logo are registered trademarks of Sony
Corporation.
Design and specications are subject
to change without notice.
General
Communication System
Bluetooth Specication version 2.0
Output
Bluetooth Specication Power Class 2
Maximum communication range
Line of sight approx. 10 m (30 )*
Frequency band
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method
FHSS
Compatible Bluetooth Profile*²
A2DP (Advanced Audio Distribution
Prole)
AVRCP (Audio/Video Remote Control
Prole)
Supported Codecs*³
SBC*
Terminals
WM-PORT (22 pin)
Operating temperature
5 ºC to 35 ºC (67 ºF to 95 ºF)
Dimensions
Approx. 28.1 × 29.1 × 7.8 mm
(1/ × 1/ × / in.) (w/h/d)
(including protruding parts)
Mass
Approx. 5 g (0.2 oz)
* e actual range will vary depending on
factors such as obstacles between devices,
magnetic elds around a microwave oven,
static electricity, reception sensitivity,
aerial’s performance, operating system,
soware application, etc.
* Bluetooth standard proles indicate the
purpose of Bluetooth communication
between devices.
1 / 1

Sony WLA-NWB1 Owner's manual

Category
Bluetooth music receivers
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document