Zenith L30W26 Installation guide

Installation and Operating Guide | Warranty

Model Number | L30W36 | LCD AV MONITOR

Multimedia Display

This LCD monitor can be connected to a PC and used in place of the a PC Monitor.

The LCD Display panel

The panel is composed of 2.9 million individual cells. It is common for a few defective cells to appear as

minute colored dots on the screen as a result of the manufacturing process. A tolerance of up to six defec-

tive cells has been adopted by all panel manufacturers and therefore should not be considered as reason

for returning the LCD Monitor for refund or exchange.

Keep this manual

with Monitor for

future easy refer-

ence

Table of Contents

First step

Setup and Operation Checklist.................................4

WARNINGS..............................................................5

Safety instructions....................................................6

Monitor Overview

Front Panel Controls ................................................8

Connection Panel Overview.....................................9

Remote Control Key Functions ..............................10

Accessories/Options...............................................12

Using the Remote Control......................................13

Equipment Connections and Setup

VCR Setup..............................................................14

Cable TV Setup......................................................16

External AV Source Setup......................................17

DVD Setup..............................................................18

DTV Setup..............................................................19

PC Setup................................................................20

Basic Features Setup and Operation

Turning on the Monitor ...........................................22

Checking Available Features..................................23

Sleep Timer

Setting Sleep Timer................................................24

Picture & Sound

Auto Picture Control ...............................................25

Adjusting Picture Appearance ................................26

Auto Sound Control................................................27

Adjusting Sound: Bass, Treble, Balance................28

Special Features

Menu Language Selection......................................29

Color Temperature Adjustments.............................30

Screen Saver Feature ............................................31

Picture Format Selection........................................32

Using the Zoom In/Out Feature..............................33

Adjusting Picture Position.......................................34

Using the Screen Option........................................35

Picture-In-Picture (PIP)...........................................36

Zooming Main Picture In/Out..................................38

Twin Picture Feature ..............................................39

PC Mode Features .................................................41

PC Mode Adjustments............................................42

External Control Device Setup...............................44

Misc.

Maintenance...........................................................52

Troubleshooting Checklist ......................................53

Product Specifications............................................55

Your Zenith Limited Warranty..................Back Cover

4

Setup and Operation Checklist

(See page 9 for available connection and operational setup options.)

1. Unpack monitor and all accessories.

2. Connect all external video and audio equipment see pages 14 through 20.

3. Install batteries in remote control.

See page 13.

4. Turn monitor on.

See page 22.

5. Choose on screen menu language.

See page 29. (English is selected.)

6. Turn video source equipment on.

7. Select viewing source for monitor.

See page 11.

8. Fine-tune source image and sound to personal preference or as required by source.

See pages 25, 27, and 28.

9. Additional features Setup

See Table of Contents.

5

Safety Instructions

Monitor Overview

Connections

Basic Operation

Sleep Timer

Picture & Sound

Special Features

Misc.

WARNINGS

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER

(OR BACK). NO USER SERVICEABLE PARTS INSIDE.

REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of sufficient magnitude to consti-

tute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

FCC NOTICE

• L30W36 : A Class B digital device

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular instal-

lation. If this equipment does cause harmful interference to radio or television reception, which can be deter-

mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

• Any changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

CAUTION:

Do not attempt to modify this product in any way without written authorization from Zenith Electronics

Corporation. Unauthorized modification could void the user’s authority to operate this product.

COMPLIANCE:

The responsible party for this product’s compliance is:

Zenith Electronics Corporation

2000 Millbrook Drive

Lincolnshire, IL 60069, USA

Phone: 1-847-941-8000

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

6

SAFETY INSTRUCTIONS

Important safeguards for you and your new product

Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential electrical

shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the

following safety points when installing and using your new product, and save them for future reference.

Observing the simple precautions discussed in this booklet can help you get many years of enjoyment and safe operation that are

built into your new product.

This product complies with all applicable U.S. Federal safety requirements, and those of the Canadian Standards Association.

1. Read Instructions

All the safety and operating instructions should be read before

the product is operated.

2. Follow Instructions

All operating and use instructions should be followed.

3. Retain Instructions

The safety and operating instructions should be retained for

future reference.

4. Heed Warnings

All warnings on the product and in the operating instructions

should be adhered to.

5. Cleaning

Unplug this product from the wall outlet before cleaning. Do not

use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

6. Water and Moisture

Do not use this product near water, for example, near a bath tub,

wash bowl, kitchen sink, or laundry tub, in a wet basement, or

near a swimming pool.

7. Accessories Carts and Stands

Do not place this product on a slippery or tilted surface, or on an

unstable cart, stand, tripod, bracket, or table. The product may

slide or fall, causing serious injury to a child or adult, and serious

damage to the product. Use only with a cart, stand, tripod, brack-

et, or table recommended by the manufacturer, or sold with the

product. Any mounting of the product should follow the manu-

facturer’s instructions, and should use a mounting accessory

recommended by the manufacturer.

8. Transporting Product

A product and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause

the product and cart combination to overturn.

9. Attachments

Do not use attachments not recommended by the product man-

ufacturer as they may cause hazards.

10. Ventilation

Slots and openings in the cabinet are provided for ventilation

and to ensure reliable operation of the product and to protect it

from overheating, and these openings must not be blocked or

covered. The openings should never be blocked by placing the

product on a bed, sofa, rug, or other similar surface. This prod-

uct should not be placed in a built-in installation such as a book-

case or rack unless proper ventilation is provided or the manu-

facturer’s instructions have been adhered to.

11. Power Sources

This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the

type of power supply to your home, consult your product dealer

or local power company. For products intended to operate from

battery power, or other sources, refer to the operating instruc-

tions.

12. Power-Cord Polarization

This product is equipped with a three-wire grounding type plug,

a plug having a third (grounding) pin. This plug will only fit into

the grounding-type power outlet. This is a safety feature. If you

are unable to insert the plug into the outlet, contact your electri-

cian to replace your obsolete outlet. Do not defeat the safety pur-

pose of the grounding-type plug.

13. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the prod-

uct, be sure the antenna or cable system is grounded so as to

provide some protection against voltage surges and built-up sta-

tic charges. Article 810 of the National Electrical Code (U.S.A.),

ANSI/ NFPA 70 provides information with regard to proper

grounding of the mast and supporting structure, grounding of the

lead-in wire to an antenna discharge unit, size of grounding con-

ductors, location of antenna-discharge unit, connection to

grounding electrodes, and requirements for the grounding elec-

trode.

PORTABLE CART WARNING

Antenna Lead in Wire

Antenna Discharge Unit

(NEC Section 810-20)

Grounding Conductor

(NEC Section 810-21)

Ground Clamps

Power Service Grounding

Electrode System (NEC

Art 250, Part H)

Ground Clamp

Electric Service

Equipment

Example of Grounding According to National

Electrical Code Instructions

NEC - National Electrical Code

7

Safety Instructions

Monitor Overview

Connections

Basic Operation

Sleep Timer

Picture & Sound

Special Features

Misc.

14. Power-Cord Protection

Power-supply cords should be routed so that they are not likely

to be walked on or pinched by items placed upon or against

them, paying particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the product.

15. Lightning

For added protection for this product (receiver) during a lightning

storm, or when it is left unattended and unused for long periods

of time, unplug it from the wall outlet and disconnect the anten-

na or cable system. This will prevent damage to the product due

to lightning and power-line surges.

16. Power Lines

An outside antenna system should not be located in the vicinity

of overhead power lines or other electric light or power circuits,

or where it can fall into such power lines or circuits. When

installing an outside antenna system, extreme care should be

taken to keep from touching such power lines or circuits as con-

tact with them might be fatal.

17. Overloading

Do not overload wall outlets and extension cords as this can

result in a risk of fire or electric shock.

18. Object and Liquid Entry

Never push objects of any kind into this product through open-

ings as they may touch dangerous voltage points or short-out

parts that could result in a fire or electric shock. Never spill liquid

of any kind on the product.

19. Servicing

Do not attempt to service this product yourself as opening or

removing covers may expose you to dangerous voltage or other

hazards. Refer all servicing to qualified service personnel.

20. Damage Requiring Service

Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

a. If the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the

product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper adjust-

ment of other controls may result in damage and will often

require extensive work by a qualified technician to restore

the product to its normal operation.

e. If the product has been dropped or the cabinet has been

damaged.

f. If the product exhibits a distinct change in performance.

21. Replacement Parts

When replacement parts are required, be sure the service tech-

nician has used replacement parts specified by the manufactur-

er or have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock, or

other hazards.

22. Safety Check

Upon completion of any service or repairs to this product, ask

the service technician to perform safety checks to determine that

the product is in proper operating condition.

23. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as rec-

ommended by the manufacturer. The product may slide or fall,

causing serious injury to a child or adult, and serious damage to

the product.

24. Heat

The product should be situated away from heat sources such as

radiators, heat registers, stoves, or other products (including

amplifiers) that produce heat.

8

Front Panel Controls

ON OFF

/I

ON OFF

POWER

MENU

VOL

POWER

MENU

VOL

INPUT

SELECT

INPUT

SELECT

Front Panel Controls

Main Power button

INPUT SELECT button

Power standby indicator

Illuminates orange in stand-

by mode, illuminates green

when the Monitor is turned

on

Remote control sensor

MENU button

EE,DD buttons

Select menu options.

VOLUME (FF,GG) buttons

Sub power button

9

Safety Instructions

Monitor Overview

Connections

Basic Operation

Sleep Timer

Picture & Sound

Special Features

Misc.

YPB PR

R

L

MONO

AUDIO

VIDEO

S-VIDEO

AV INPUT

COMPONENT

(DVD/DTV INPUT)

AC INPUT

R

L

AUDIO

RGB 2 INPUT

(DIGITAL RGB INPUT)

RGB 1 INPUT

(PC/DTV INPUT)

RS 232C INPUT

(CONTROL/SERVICE)

DC OUTPUT

(DC 12V)

( )

R

L

Ω

EXTERNAL SPEAKER(6 )

Back Panel

Connection Panel Overview

A/V Input / COMPONENT

(DVD/DTV) INPUT jacks /

S-video

(R)-(L) Audio sound input jacks

RGB-1 (PC/DTV INPUT) port

RGB-2 (DIGITAL RGB INPUT) port

- RGB-2 Input (Digital RGB port):

Supports DVI-D signal.

RS-232C jacks

AC INPUT jack

DC OUTPUT (DC 12V) jack

For R-L speaker

connections

Remote Control Key Functions

- When using the remote control aim it at the remote control sensor on the Monitor.

10

123

456

78

0

9

SLEEP

INPUT SELECT

POWER

APC

DASP

ARC

PIP ARC

PIP

TWIN PICTURE

SWAP

SUB INPUT

MENU

MUTE

VOLVOL

ENTER

ZOOM+

ZOOM-

WIN.SIZE

WIN.POSITION

VOL

PIP (Refer to p. 36)

ARC (Refer to p. 32)

APC (Refer to p. 25)

PIP Operation

SLEEP (Refer to p. 24)

ENTER

POWER

SWAP (Refer to p. 37)

MENU

11

Safety Instructions

Monitor Overview

Connections

Basic Operation

Sleep Timer

Picture & Sound

Special Features

Misc.

Input Select Key on remote con-

trol

Each press changes the source as

shown below.

RGB2

COMPONENT

RGB1

S-VIDEO

MUTE

switches the sound on or off.

DASP (Refer to p. 27)

PIP ARC (Refer to p. 36)

TWIN PICTURE (Refer to p. 39)

VIDEO

INPUT SELECT

SUB INPUT (Refer to p. 39)

UP/DOWN

12

Accessories

D-sub 15 pin cable

Power Cord

123

456

78

0

9

SLEEP

INPUT SELECT

POWER

APC

DASP

ARC

PIP ARC

PIP

TWIN PICTURE

SWAP

SUB INPUT

MENU

MUTE

VOLVOL

ENTER

ZOOM+

ZOOM-

WIN.SIZE

WIN.POSITION

Remote Control

Owner’s Manual

Alkaline Batteries

DVI Computer (DVI-D)

Cable

PC Audio Cable Video Cable

1.5V

Speaker cable

Options

Speakers

Accessories/Options

13

Safety Instructions

Monitor Overview

Connections

Basic Operation

Sleep Timer

Picture & Sound

Special Features

Misc.

Using the Remote Control

Installing Batteries

• Open the battery compartment cover on the back

of the remote control and insert the batteries with

correct polarity, match “+” with “+”, and match “-”

with “-”.

• Install two 1.5V “AAA” alkaline batteries.

Don’t mix used batteries with new batteries.

Notes for Using the Remote Control

Make sure these are no

objects between the

remote control and its

sensor.

Don’t place the remote control

near a heater or damp place. A

hard impact to the remote control

may cause operation failure.

Signal from the remote control

may be disturbed by sun light or

other strong light. In this case,

turn the set to a different direc-

tion, or dim the room light.

14

VCR Setup

Tip

• To avoid picture noise (interference), leave an adequate distance (20 inches or more)

between the VCR and monitor.

S-VIDEO

OUT

IN

(R) AUDIO (L) VIDEO

Back Panel of VCR

- As shown below, when connecting the Monitor to a VCR, match the colors of AV input

jacks on the Monitor with the output jacks on the VCR: Video = yellow, Audio (Left) =

white, Audio (Right) = red.

- If you have a mono VCR, connect the audio cable from the VCR to the AUDIO (L/MONO)

input on the LCD Monitor.

- If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved,

compared to connecting a regular VCR to the Video input.

- Avoid having a fixed image remain on the screen for a long period of time. A frozen still

picture from a VCR (e.g. a Channel label) displayed on the screen for prolonged periods of

time will result in a ghost image remaining even after you change the image. Avoid pro-

longed display of any still image.

15

Safety Instructions

Monitor Overview

Connections

Basic Operation

Sleep Timer

Picture & Sound

Special Features

Misc.

YPB PR

R

L

MONO

AUDIO

VIDEO

S-VIDEO

AV INPUT

COMPONENT

(DVD/DTV INPUT)

AC INPUT

R

L

AUDIO

RGB 2 INPUT

(DIGITAL RGB INPUT)

RGB 1 INPUT

(PC/DTV INPUT)

RS 232C INPUT

(CONTROL/SERVICE)

DC OUTPUT

(DC 12V)

Monitor Connections Panel

To Watch VCR

Use the INPUT SELECT button on the

remote control to select VIDEO.

(When connecting with S-Video, select the

S-VIDEO source.)

1

Insert a video tape into the VCR and press

the PLAY button on the VCR. See VCR

owner’s manual.

2

INPUT SELECT

16

Cable TV Setup

- After subscribing to a cable TV service from a local provider and installing a converter,

you can watch cable TV programming. This monitor cannot display TV programming

without a TV tuner or cable TV converter box.

TV

VCR

RF Cable

(R) AUDIO (L) VIDEO

YPB PR

R

L

MONO

AUDIO

VIDEO

S-VIDEO

AV INPUT

COMPONENT

(DVD/DTV INPUT)

AC INPUT

R

L

AUDIO

RGB 2 INPUT

(DIGITAL RGB INPUT)

RGB 1 INPUT

(PC/DTV INPUT)

RS 232C INPUT

(CONTROL/SERVICE)

DC OUTPUT

(DC 12V)

To Watch Cable TV Programming

Use the INPUT SELECT button on the remote

control to and select the VIDEO source.

1

Tune to cable service provided channels

using the cable box.

2

Tip

• For further information regarding cable TV service, contact your local

cable TV service provider(s).

Monitor Connections Panel

Cable Box

Connections Panel

INPUT SELECT

17

Safety Instructions

Monitor Overview

Connections

Basic Operation

Sleep Timer

Picture & Sound

Special Features

Misc.

YPB PR

R

L

MONO

AUDIO

VIDEO

S-VIDEO

AV INPUT

COMPONENT

(DVD/DTV INPUT)

AC INPUT

R

L

AUDIO

RGB 2 INPUT

(DIGITAL RGB INPUT)

RGB 1 INPUT

(PC/DTV INPUT)

RS 232C INPUT

(CONTROL/SERVICE)

RL

AUDIO VIDEO

Camcorder

Video Game Player

DDR

DC OUTPUT

(DC 12V)

To watch external AV source

Use the INPUT SELECT on the monitor

remote control to select VIDEO.

1

Operate the corresponding external equip-

ment. See external equipment operating

guide.

2

External AV Source Setup

- As shown below, when connecting the Monitor to an external source, match the

colors of AV input jacks on the Monitor with the output jacks on the audio/video

equipment: Video = yellow, Audio (Left) = white, Audio (Right) = red.

Monitor Connections Panel

INPUT SELECT

Connections Panel

Typical External Equipment

18

DVD Setup

• Connect DVD video outputs to Y, PB, PR of COMPONENT (DVD/DTV INPUT) and audio

outputs to Audio jacks of AV INPUT.

• Component Input is available in 480i, 480p, 720p, and 1080i modes.

• If your DVD has only S-video output, connect S-video of DVD to S-video jacks on the

monitor and audio outputs to Audio jacks of AUDIO INPUT.

How to Connect a DVD (Digital Video Disk Player)

How to select and view

Component source

• Use the INPUT SELECT button on the monitor's remote

control to select COMPONENT.

• Turn on the DVD player, and insert a DVD.

Follow instructions in the DVD player's owners manual.

• Component Input Jacks

Connect DVD player jacks to Monitor's

Component input jacks as indicated below.

YPB PR

R

L

MONO

AUDIO

VIDEO

S-VIDEO

AV INPUT

COMPONENT

(DVD/DTV INPUT)

AC INPUT

R

L

AUDIO

RGB 2 INPUT

(DIGITAL RGB INPUT)

RGB 1 INPUT

(PC/DTV INPUT)

RS 232C INPUT

(CONTROL/SERVICE)

B

R

(R) AUDIO (L)

DC OUTPUT

(DC 12V)

Typical DVD Player Connections Panel

Component input jacks

on the Monitor

Y

PB

P

R

Video output jacks

of DVD player

Y

Pb

B-Y

Cb

PB

Pr

R-Y

Cr

PR

Monitor Connections Panel

19

Safety Instructions

Monitor Overview

Connections

Basic Operation

Sleep Timer

Picture & Sound

Special Features

Misc.

DTV Setup

- To watch digitally broadcast programs, purchase/connect a digital SET-TOP BOX.

How to Connect

How to Select and Use a Digital Set-top Box

YPB PR

R

L

MONO

AUDIO

VIDEO

S-VIDEO

AV INPUT

COMPONENT

(DVD/DTV INPUT)

AC INPUT

R

L

AUDIO

RGB 2 INPUT

(DIGITAL RGB INPUT)

RGB 1 INPUT

(PC/DTV INPUT)

RS 232C INPUT

(CONTROL/SERVICE)

(R) AUDIO (L)

(R) AUDIO (L) Y P

BR

P

DTV OUTPUT

DC OUTPUT

(DC 12V)

DVI-HDTV-OUT

• Turn on the digital SET-TOP BOX.

(Refer to the owner’s manual for the digital SET-TOP BOX.)

• Use the INPUT SELECT button on the remote control to select

COMPONENT, RGB1 or

RGB2 (HDCP(High-bandwidth Digital Contents Protection) compatible).

Typical Digital Set-top Box Connections Panels

or

• You can use the Monitor’s COMPONENT (DVD/DTV INPUT) inputs, the single RGB1

(PC/DTV INPUT) or RGB2 for video connections, depending on your Set-top Box connec-

tors. Then, make the corresponding Audio connections.

• DTV Input is available in 480p, 720p, and 1080i modes.

Monitor Connections Panel

20

PC Setup

- You can easily connect the LCD monitor to your PC for outstanding image and sound.

On the remote control

How to use

YPB PR

R

L

MONO

AUDIO

VIDEO

S-VIDEO

AV INPUT

COMPONENT

(DVD/DTV INPUT)

AC INPUT

R

L

AUDIO

RGB 2 INPUT

(DIGITAL RGB INPUT)

RGB 1 INPUT

(PC/DTV INPUT)

RS 232C INPUT

(CONTROL/SERVICE)

L

DC OUTPUT

(DC 12V)

Tips

Monitor Connection Panel

Setup Instructions to Connect a PC to your Monitor

• To set up this monitor in your PC window environ-

ment, select Normal, Standard or Default Monitor.

This monitor does not support Plug and Play func-

tionality.

• An image is not visible if the resolution is set to

over UXGA.

• Connect the signal cable from the monitor Output

port on the PC to the RGB1(PC/DTV INPUT) port

on the Monitor.

• Connect the audio cable from the PC to the Audio

ports on the Monitor.

• If your PC is equipped with a sound card, adjust

the sound output on the PC.

• Set the display resolution of the PC to 1024X768

for the best picture. This monitor’s resolution is

1280X768.

PC Setup

• First, turn on the PC and press the ON/OFF button on the Monitor to

apply power to it. Second, turn on the display by pressing the

button on the Monitor or by pressing the POWER button on the

Monitor’s remote control.

• Use the INPUT SELECT button on the remote control to select the

RGB1 input source.

• Set the resolution output of the PC to SXGAor under (1280 x 1024,

75Hz).

• Avoid keeping a fixed image on the Monitor's screen for a long period of time. The fixed image may

become permanently imprinted on the screen; use a screen saver when possible.

• Change the output resolution of PC to a displayable mode (Refer to page 21) and connect to

RGB1/RGB2 Input (PC/DTV Input) on the monitor.

INPUT SELECT

Page is loading ...

Zenith L30W26 Installation guide

This manual is also suitable for

Zenith L30W26 Installation guide

Related papers

Other documents