Haier LE22M600CF User manual

LE22M600CF

LE24M600CF

LE28M600C

LE32M600C

Please read this manual carefully before operating the unit,and keep it for

future reference.

Welcome

Important Information

01 Safety Warnings

2

Safety notice

Warning and cautions

3

4

Main Parameter

Base Stand Assembly Instruction

02 Introduction

5

7

Wall Mounting Installation Guidelines

Front Control Panel

8

10

Rear/Side Sockets

11

Connecting to your Haier TV

Common Interface

12

15

Remote Control

03 Remote Control

16

Teletext

17

Installation Guide

04 Operation

18

CHANNEL MENU 18

Auto Tuning (DVB-T) 18

Auto Tuning (DVB-C) 19

DTV Manual Tuning (DVB-T)

DTV Manual Tuning (DVB-C)

ATV Manual Tuning

20

PICTURE MENU 21

22

Audio

MENU

21

Clock

MENU

22

SETUP

MENU

LOCK

MENU

EPG Menu(Electronic Program Guide)

23

PVR File System(only for DTV)

23

Prepare to record the program

24

22

Record the program

24

Play the recording

24

Time shift

25

USB Player

26

Trouble shooting

05 Trouble shooting

28

Specification 31

Program edit

Common Interface

20

21

Signal Information

Software Updated(USB)

21

06 Specification

Thanks for buying this 22"/24"/28"/32" LED LCD TV.This guide will help you set up and begin using your TV.

IMPOR

TANT INFORMATION

READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.

FOR ANY PROBLEMS, REFER SERVICING TO THE CUSTOMER HELP LINE. THERE IS A LIGHTNING ARROW SYMBOL IN

THE TRIANGLE: THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF

CONTACT WITH ANYINSIDE PART OF THIS PRODUCT.

THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE

CONCERNING OPERATION AND MAINTENANCE HAS BEEN INCLUDED WITH THIS PRODUCT.

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR

SOURCES OF HUMIDITY. DO NOT USE ANY ABRASIVE CLEANERS WHICH MAY SCRATCH OR DAMAGE

THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.

NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORISED AND COULD LEAD TO INJURY OR PRODUCT

DAMAGE. REFER ALL SERVICING TO THE CUSTOMER HELPLINE.

Now you can get star

ted!

22" FULL HD 1080P Digital LED LCD TV

Remote control

Instruction Manual

Quick start guide

AAA ba x2ttery

01 Safety warnings

Warranty Card

24" FULL HD 1080P Digital LED LCD TV

Remote control

Instruction Manual

Quick start guide

AAA ba x2ttery

28" HD Ready Digital LED LCD TV

Remote control

Instruction Manual

Quick start guide

AAA ba x2ttery

Screws

32" HD Ready Digital LED LCD TV

Remote control

Instruction Manual

Quick start guide

AAA ba x2ttery

YPbPr Connect Cable

Screws

Warranty Card

Stand

Safety notice

EN-3

CAUTION:When the apparatus was in

electrostatic circumstance, it maybe

malfunction and need to reset by user.

Dim:515*320mm(不包括底座）

Warning

High voltages are used in the operation of this

television receiver. Do not remove the cabinet

back from your set. Refer servicing to qualified

service personnel.

Warning

To prevent fire or electrical shock hazard, do

not expose the television receiver to rain or

moisture.

Warning

Do not drop or push objects into the

television cabinet slots or openings. Never

spill any kind of liquid on the television

receiver.

Caution

Do not block the ventilation holes in the back

cover. Adequate ventilation is essential to

prevent failure of electrical components.

Caution

Do not trap the power supply cord under the

television receiver.

Caution

Never stand on, lean on, or suddenly push the

television or its stand. You should pay special

attention to children. Serious injury may result if

it should fall.

Caution

Do not place your television on an unstable cart,

stand, shelf or table. Serious injury to an

individual , and damage to the television, may

result if it should fall.

Caution

When the television receiver is not used for an

extended period of time, it is advisable to

disconnect the AC power cord from the AC

outlet.

Caution

If the television is to be built into a compartment

or similar enclosure, the minimum distances must

be maintained. Heat build-up can reduce the

service life of your television, and can also be

dangerous.

WARNING AND CAUTIONS

EN-4

Panel

PAL-B/G ,I , D/K

PAL/SECAM/MPEG2/MPEG4/H.264

AC 100

-

240V 50/60Hz

2x3W

Analog RGB(PC) x1; PC audio x1

High-Definition Multimedia Interface (HDMI) x 2

Composite Input x 1

YPbPr x 1

SCART Input x 1

22"

CI x 1

USB x 1

RF Co-Ax x 1

Composite video input >=350

YPbPr >=400

Headphone x 1

COAXIAL x 1

TV System

Video Signal System

Input Power Voltage

Power consumption

Standby Power consumption

Audio Output Power (THD 7%)

Signal Input

Signal output

Horizontal definition (TV line)

SECAM-B/G , D/K , L

<0.30W

DVB-T, DVB-C

INSTALLATIONCAUTION

*Locate the TV in the room where light does

not strike the screen directly.

*Total darkness or a reflection on the picture

screen can cause eyestrain. Soft and indirect

lighting is recommended for comfortable

viewing.

*Allow enough space between the TV and the

wall to permit ventilation.

*Avoid excessively warm locations to prevent

possible damage to the cabinet or premature

component failure.

*Do not cover the ventilation openings when

using theTV.

Main parameter

Main features

4 NICAM；

5 T ；ime-shift

3

HDMI interface and SCART

Interface；

High luminance, wide viewing

angle；

2

Used as Television, display terminal,

PC display；

1

Never tamper with any components inside the

TV, or any other adjustment controls not

described in this manual. All LED-TV's are high

voltage electrical equipment.

When you clean dust or any water drops off the

SCREEN or CABINET or around any of the

buttons or connectors, the power cabled should

be removed from the power socket. Wipe the TV

with a soft, dry, dust free cloth.

During thunderstorms, unplug the power cable

and aerial / antenna cable to prevent damage to

your TV and any other devices connected to it.

All repairs to this TV should only be performed

by qualified TV service

personnel.

02 Introdution

Introduction

EN-5

1000(DTV);100(ATV)Storage channel number

24"

38W 40W

SCART Output x 1

28" 32"

41W 50W

2x3W

2x8W

SUPPORTED MODE

PC

3

5

1024x768

1280x1024

60

1

640x480

60

31.47

2

800x600

60

37.88

48.36

63.98

RESOLUTION

V.Freq.(KHz) H.Freq.(KHz)

4

1366x768

60

47.7

Introduction

EN-6

6

1920x1080

60

66.64

(only for 22",24")

Base Stand Assembly Instruction

Locate the TV in a room where light does not strike the screen directly. Total darkness or a

reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for

comfortable viewing.

Allow enough space between the TV and the wall to permit ventilation.

Please do not attempt to rotate the TV on the stand.

Avoid excessively warm locations to prevent possible damage to the cabinet or premature

component failure.

INSTALLATION NOTES

Introduction

EN-7

2. Attach the stand base plate to the stand pole

by firmly tightening the supplied screw.

1.Place the TV with the display side down on a flat

surface.Use a cloth to protect the display.Position

the stand base plate onto the bottom of the stand

pole.

(22",24")

(28")

(32")

WALL MOUNTING INSTALLATION GUIDELINES

2.Remove the screws from the lower part of the

television, where the base joins to the TV, and take

away the stand (put the stand somewhere safe for

future use).

1.Place the LED LCD Television onto a solid

surface. Please place some soft material

over the front of the screen to protect it

from any damage.

Introduction

EN-8

This television can be wall mounted as follows:

(22",24")

(28")

(32")

Introduction

EN-9

M4X5

100mm

3.Use the four screws provided to fix the TV onto a wall mounting bracket (not included)

via the four VESA standard holes on the back of the television.

M4X5

200mm

100mm

M4X5

200mm

100mm

(22",24")

(28")

(32")

1

2

3

Remote control sensor.

Indicator LED:

RED: STAND BY.

Key board.

1

SOURCE

Display the input source menu.

MENU

Display main MENU.

3

4

CH+/CH-

In TV mode,press CH+ or CH- to change

the channel up and down.

In MENU, press CH+ or CH- to select items .

STANDBY

2

VOL+/VOL-

Adjust sound level.

In MENU,adjust the item that you selected.

5

EN-10

Introduction

Front control panel(22",24",28")

3

2

30 30

1

≤8m

MENU

CH+

CH-

VOL+

VOL-

2

SOURCE

1

3

4

STANDBY

5

1

2

3

Remote control sensor.

Indicator LED:

RED: STAND BY.

Key board.

1

SOURCE

Display the input source menu.

MENU

Display main MENU.

3

4

CH+/CH-

In TV mode,press CH+ or CH- to change

the channel up and down.

In MENU, press CH+ or CH- to select items .

STANDBY

2

VOL+/VOL-

Adjust sound level.

In MENU,adjust the item that you selected.

5

3

2

30 30

1

≤8m

SOURCE

MENU

CH+

CH-

VOL+

VOL-

STANDBY

1

2

3

4

5

Front control panel(32")

Rear/Side Sockets(22",24",28")

1

L/R AUDIO

2

input

3

4

input

5

input/output

input

VIDEO

6

input

SCART

USB

YPbPr

DIGITAL AUDIO OUTPUT(COAXIAL)

7

input

HDMI2(ARC)

digital audio output

8

9

HDMI1 input

10

11

12

13

input

HEADPHONE

PC AUDIO

VGA

input

analogue audio output

COMMON INTERFACE(CI)

input

RF

DIGITAL AUDIO OUTPUT

(COAXIAL)

4

1 2 5

COMMON INTERFACE (CI)

USB

6

7 8 9 10

11 12 13

3

VIDEO R

HDMI2(ARC)

Rear/Side Sockets (32")

1

YPbYr

2

input

3

4

input

5

digital audio output

input

AC Power Source

6

input/output

DIGITAL AUDIO OUTPUT( )COAXIAL

SCART

L/R AUDIO

VIDEO

7

input

USB

input

8

9

HDMI2(ARC) input

10

11

12

13

input

HDMI1

COMMON INTERFACE(CI)

PC AUDIO

input

analogue audio output

input

HEADPHONE

input

VGA

14

input

RF

Introduction

EN-11

2 3

1

4

6

5

7 8 9

11 12 13 1410

AC-INPUT

100-240V~ 50/60Hz

YPbPr

VIDEO

LR

DIGITAL AUDIO OUTPUT

(COAXIAL)

SCART

USB HDMI2(ARC) HDMI1

HEADPHONE

COMMON INTERFACE(CI)

PC AUDIO

VGA R F

HDMI1

Introduction

Connecting to your Haier TV(22",24",28")

EN-12

GRB

COMMON INTERFACE (CI)

USB

CVBS, DVD Player or other

machine with YPbPr/YCbCr.

RY

W

Audio/Video machine

with HDMI interfaces

CVBS, DVD Player or other

machine with CVBS/S-Video.

G Green (Y)

B Blue (Pb/Cb)

W White(AUDIO-L )

R Red (AUDIO-R, Pr/Cr)

Y Yellow (VIDEO)

Amplifier

HDMI2(ARC)

DIGITAL AUDIO OUTPUT

(COAXIAL)

VIDEO R

HDMI1

Audio/Video machine

with HDMI interfaces

RY W

CVBS, DVD Player or other

machine with CVBS/S-Video.

Introduction

Connecting to your Haier TV(32")

G Green (Y)

B Blue (Pb/Cb)

W White(AUDIO-L )

R Red (AUDIO-R, Pr/Cr)

Y Yellow (VIDEO)

Amplifier

CVBS, DVD Player or other

machine with YPbPr/YCbCr.

USB HDMI2(ARC) HDMI1

HEADPHONE

COMMON INTERFACE(CI)

PC AUDIO

VGA R F

GR

B

EN-13

AC-INPUT

100-240V~ 50/60Hz

YPbPr

VIDEO

LR

DIGITAL AUDIO OUTPUT

(COAXIAL)

SCART

EN-14

Introduction

Connecting a DVD player / Satellite / cable

set top box receiver / games console / PC or

Laptop

There are several options to connecting a DVD

player / Satellite or Cable set top box receiver /

games console / PC or Laptop to your TV.

Option 1 SCART

Connect a SCART cable (not supplied)

from the SCART socket on the TV to the DVD

player / Satellite or cable set top box receiver or

games consol.

To select the device connected with the

SCART cable press the SOURCE button on the

remote and use the keys to select SCART

and press the OK button.

Note:- The TV will default to the SCART

connection when the TV is switched on.

Option 2 HDMI1/HDMI2

If the device you want to connect to the TV

is switched on, switch off the device first.

Connect a HDMI cable (not supplied) from

the HDMI socket on the TV to the DVD player /

Satellite or cable receiver or games consol.

Switch on the device you have just

connected to the TV

To select the device connected with the

HDMI cable press the SOURCE button on the

remote and use the keys to select HDMI and

press the OK button.

Option 3 AV Audio Visual

(Yellow/White/Red)

Make sure that both TV and the device are

switched off before connecting.

Connect the AV cables (not supplied) from

the Video (yellow) and Audio (white, red)

sockets on the TV to the DVD player or games

console etc.

To select the device connected with the

cable press the SOURCE button on the

remote and use the keys to select AV and

press the OK button.

Option 4 COMPONENT

(Green/Blue/Red)+(White/Red)

Make sure that both TV and the device are

switched off before connecting.

Connect the cables (not supplied) from the

COMPONENT IN sockets Y, Pb, Pr (green,

blue, red) and L-Audio-R (white, red) on the TV

to the DVD player or games console etc.

AV

To select the device connected with the

cable press the SOURCE button on the

remote and use the▼▲ keys to select and

press the OK button.

Option 5 VGA (15pin Sub-D)

Connect a VGA cable (not supplied) from the

VGA socket on the TV to the PC / Laptop.

To select the PC / Laptop connected with the

VGA cable press the SOURCE button on the

remote and use the keys to select PC and

press the OK button.

Note VGA is video only. For audio from your

PC/Laptop you need to connect a separate

cable from the PC Audio (3.5mm jack) to the

headphone socket on you PC/Laptop (3.5mm

jack)

Option 6 USB

Most USB sticks can be connected to your TV

and some digital cameras may also work.

Connect USB stick (not supplied) or a USB

cable (not supplied) to the TV.

To select the USB device connected to the TV,

press the SOURCE button on the remote and

use the keys to select USB and press the

OK button.

Note 2. Apple iPhones and iPods are not

compatible with your TV.

Note 3. When connecting any device to the USB

connection, keep the USB cable length as short

as possible.

Option 7

Option 8

Component

YPbPr

Note1:Only *.jpg , *.mp3 , *.txt , *.avi ,*.mp4 , files will

work, other file types are not guaranteed and may not.

HEADPHONE OUTPUT

is a digital audio connection used to

connect audio equipment, for example home

theatres and other digital HiFi systems over

short distances. The signal is transmitted over

either a coaxial cable with RCA connectors.

Make sure that both TV and the device are

switched off before connecting.

Connect the AV cables (not supplied) from

the socket on the TV to the Home Theater

sound system or digital HiFi system etc.

Insert the plug of the earphone into the headphone

socket on the TV. The TV speakers are now muted.

Alternatively you can also plug in external speakers if

required.

DIGITAL AUDIO OUT(COAXIAL)

COAXIAL

Connecting to your Haier TV

EN-15

The common interface (CI) slot is designed to

accept the conditional Access (CA) Module and

Smart card in order to view the pay TV

programmes and additional services.

Contact your Common Interface service provider

to get more information about the modules and

subscription.

Please noted that CA modules and smart cards

are neither supplied nor optional accessories

from us.

COMMON INTERFACE

Introduction

Common Interface option.

CAM Removed

CAM Inserted

Channel

Picture

Audio

Clock

Setup

Lock

Auto Scan

Signal Information

Software Update(USB)

Manual Scan

Program Edit

Common Interface

Return Move OK

OK

MENU

Press to turn the TV on or off.

(Power)

S.MODE

Press to select the sound mode.

P.MODE

Press to select the picture mode.

0-9

Press to enter a channel number

or password.

Q.VIEW

Press to switch to the last viewed

channel.

SLEEP

Press to set the sleep timer.

VOL +/-

Press to adjust the volume level.

(Mute)

Press to turn the sound on or off.

AUDIO(I/II)

Press to select Mono,Nicam stereo

for ATV channel.Select Audio

language for DTV channel.

SUBTITLE

Press to turn the subtitle on or off.

Press to open a favorite channel

list.In teletext mode,press to

hold a page.

03 Remote Control

Remote Control

SCREEN

Press to change picture aspect ratio.

Press to open the on-screen menu.In teletext

mode,press to open the INDEX page.

Press to navigate the on-screen menu.

Press to confirm a selection.OK

In teletext mode,press to enter mix mode.

(reverse)

(forward)

Press to fast forward or reverse playback in

multimedia mode and timeshift (Red and

Green button in teletext mode)

mode.

Press to turn on/off the teletext function,and

change TTX mode.

SOURCE

Press to open the input source list.

No function.

P

Press to change the channel.

Press to display the channel information.

In teletext mode,press to revealthe hidden

information.

Press to open the channel list.In teletext mode,

press to size the teletext.

3D WORLD

No function.

Press to close the on-screen menu.In teletext

mode,press to hide the text.

16

17

18

19

20

21

22

23

24

25

26

Press to select previous or next file.(yellow and

blue button in teletext mode)

(previous)

(next)

Press to stop multimedia playback,stop timeshift

in DTV mode.

GUIDE

Press to display electronic programme guide

in TV mode. In teletext mode,press to enter a

secondary page.

(REC)

Press to record the TV program you are watching

in DTV mode.

Press to play/pause in multimedia mode,

timeshift in DTV mode.

(play/pause)

Insert Batteries into the Remote Contol

1. Remove the battery cover.

2. Inserting the 2 AAA 1.5V batteries making sure the polarity

(+ or -) of the batteries matches the polarity marks inside the unit.

3. Mount the battery cover. Replace with new batteries when the

TV set begins to show the following symptoms:Operation is

unsteady or erratic. Sometimes the TV set does not function

with Remote Control Unit.

Remark:

1) Alkaline Battery Recommeded.

2) Remove batteries when they are exhausted or if the remote

control is not to be used for long time.

EN-16

E

TEXT

SELECTING A PAGE

DIRECT ACCESS

TO THE ITEMS

INDEX

SUB CODE

HOLD

REVEAL

Press:

You will obtain :

TELETEXT

Enter the number of the page required using the 0 to 9 up/down. Example:

page 120, enter 120. The number is displayed top left, the counter turns and

then the page is displayed. Repeat this operation to view another page. If

the counter continues to search, this means that the page is not

transmitted. Select another number.

Coloured are as are displayed at the bottom of the screen. The 4 coloured

keys are used to access the items or corresponding pages. The coloured

areas flash when the item or the page is not yet available.

This returns to the contents page (usually page 100).

Press the button and enter the 4-digit number to enter a secondary page.

To freeze the page.

To display or hide the concealed information (games solutions).

This is used to call or exit teletext modes. The summary appears with a list

of items that can be accessed. Each item has a corresponding 3 digit page

number.

Teletext is an information system broadcast by certain channels which can be consulted like

a newspaper. It also offers access to subtitles for viewers with hearing problems or who are

not familiar with the transmission language(cable networks, satellite channels, etc.)

Remote Control

EN-17

MIX

This will superimpose the teletext data on top of the TV picture. Press

button again to return to full text.

EXIT

Hide the teletext.

SIZE

Switch the image to top,bottom,full.

Operation

04 OPERATION

The First Time Setup screen will appear when the TV is first switched

on or reset to the factory setting.

Installation Guide

1).Press the ▼▲ buttons to navigate the menu and ◀▶buttons

to change the settings. Select your desired language ,Home/Shop

Mode to be displayed on the menu.

2). Press the ◀▶buttons to select AIR/Cable means DVB-T/DVB-C.

If you select DVB-C, you will select Full or Quick way to

scan.Also you can select Auto Scan mode. DTV+ATV or

DTV only, or ATV only.

First Time Setup

OSD Language English

Mode Setting Home Mode

Country Germany

Start

Auto Scan DTV+ATV

Antenna Type Air

First Time Setup

OSD Language English

Mode Setting Home Mode

Country Germany

Start

Auto Scan DTV+ATV

Antenna Type Cable

Cable Quick

3). Channel tuning will commence. This operation

may take up to . The display will show

the progress of the tuning and the number of

channels found.

4). If you want to skip the DTV tuning, press the

MENU button to interrupt the tuning half way.

You will then go straight to ATV tuning.

5). After tuning is complete, the channels are

arranged in a preset order. If you wish to skip channels,

modify the preset order or rename

channels, select

Programme Edit under the

Channel menu.

some minutes

1. 1)Auto Tuning (DVB-T)

1. CHANNEL MENU

1). Press the MENU button and then press the▼▲

buttons to select the CHANNEL menu and then press

the OK button or Right button.

2). Press the ▼▲ buttons to select Auto Scan and then

press the OK button.

DTV Digital TV

ATV Analogue TV (not used in UK)

In the UK to connect to cable TV you will require the

appropriate cable TV's company's 'set top box' to be

connected to the TV. Please refer to the cable TV's

instructions manual for further details.

EN-18

HOME or Shop modes

1.When the unit is turn on for the very first time, it will show

Initialization set-up menu. After the OSD language is set, the

user can choose between "shop mode" and "home mode".

When the screen shows the following setting menu and the

cursor stays on the "home mode" choice, press

◀▶ to adjust,

and "OK" to enter the menu.

Select the usage mode?

shop mode is for shop usage only.

Shop mode

Home mode

If "Shop mode" is choosen, the following menu will displayed.

Are you sure to change to

Shop mode?

OK

Cancel

Choose "OK" to enter the next prompt menu.

Home mode is the most energy mode.

OK

Cancel

Continue?

Choose "Cancel" to go back to the Initialization set-up menu,

and the cursor will stay at the "home mode" choice. choose it to

go the next menu to choose the country.

First Time Setup

Channel

Picture

Audio

Clock

Setup

Lock

Auto Scan

Signal Information

Software Update(USB)

Manual Scan

Program Edit

Common Interface

Return Move OK

OK

MENU

Operation

3). Press the ◀▶buttons to select Antenna Type to Air

means DVB-T.

5). In the Mode item, press the

◀▶buttons to select tune

mode: ATV / DTV / DTV + ATV. Press the

▼button to select

Start to start.

6). Channel tuning will commence. This operation may take

up to . The display will show the progress of the

tuning and the number of channels found.

7). If you want to skip the DTV tuning, press the MENU

button to interrupt the tuning half way. You will then go

straight toATV tuning. You may repeat the above step if

you also want to skip the ATV tuning. An installation

reminder will appear the next time you turn on the TV,

if no channel is found.

8). After tuning is complete, the channels are arranged in a

preset order. If you wish to skip channels, modify the preset

order or rename channels, select P

rogramme Edit under the

channel menu.

some minutes

Channel

Picture

Audio

Clock

Setup

Lock

Scanning Ch12

Digital Channels Found:

DTV: 3

Radio: 0

Data: 0

Analog Channels Found: 0

1.2 )Auto Tuning (DVB-C)

1). Press the MENU button and then press the▼▲

buttons to select the CHANNEL menu and then

press the OK button.

2). Press the▼▲ buttons to select Auto Tuning and

then press the OK button,select Antenna Type to cable

mean DVBC.

3). Press the▼button and then press the◀▶▼▲buttons

to select the country you will operate the TV.

Channel

Picture

Audio

Clock

Setup

Lock

Antenna Type Air

Country Germany

Mode DTV+ATV

Start

Channel

Picture

Audio

Clock

Setup

Lock

Antenna Type Cable

Country Germany

Mode DTV+ATV

Start

Channel

Picture

Audio

Clock

Setup

Lock

Quick

Full

Advanced

4). In Country mode, press the ◀▶buttons to select the

country where you will operate the TV.

4). In the Mode menu, press the

◀▶buttons to select ATV /

DTV / DTV + ATV.

6). Channel tuning will commence. This operation may

take up to The display will show the

progress of the tuning and the number of channels

found.

some minutes.

EN-19

5). Select start to enter the menu as below, to select

search mode.

▶

Return Move OK

OK

MENU

Skip

MENU

Exit

EXIT

Return Move OK

OK

MENU

Return Move OK

OK

MENU

Page is loading ...

Haier LE22M600CF User manual

This manual is also suitable for

Haier LE22M600CF User manual

in other languages

Related papers

Other documents