Greenlee 04796 Trigger Interlock Assembly for 43180, 43177 User manual

Greenlee
Brand
Greenlee
Model
04796 Trigger Interlock Assembly for 43180, 43177
Category
Car kits
Type
User manual

This manual is also suitable for

Greenlee 04796 Trigger Interlock Assembly for 43180, 43177 Manual is a replacement part for several Greenlee chain saws and the 43180 overhead circular saw. This assembly includes a trigger, safety latch, pin, torsion spring, and retaining rings. It is essential for ensuring the safe operation of your saw by preventing accidental triggering. Refer to your saw's instruction manual for proper installation and use.

Greenlee 04796 Trigger Interlock Assembly for 43180, 43177 Manual is a replacement part for several Greenlee chain saws and the 43180 overhead circular saw. This assembly includes a trigger, safety latch, pin, torsion spring, and retaining rings. It is essential for ensuring the safe operation of your saw by preventing accidental triggering. Refer to your saw's instruction manual for proper installation and use.

SERVICE BULLETIN
99951908 REV 2 © 2019 Greenlee Tools, Inc. 9/19
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
Register this product at www.greenlee.com
04796 Trigger Interlock Assembly
for use on
38568, 43177, and
43178 Long-Reach
Chain Saws
43180
Overhead
Circular Saw
04796 Trigger Interlock Assembly
Read and understand all of the
instructions and safety information
in this bulletin before operating or
servicing this tool. Refer also to the
instruction manuals for your saw.
Failure to observe this warning
could result in severe injury or death.
Wear eye protection when operating
or servicing this tool.
Failure to wear eye protection could
result in serious eye injury from
ying debris or hydraulic oil.
Kit Instructions
1 3
5 2 4
4
1. Position the trigger (1) and safety latch (3) as shown.
2. Slide the pin (2) half way through the trigger (1) and
safety latch (3).
3. Position the torsion spring (5) as shown and slide
the pin (2) completely through the trigger (1).
4. Assemble two retaining rings (4) onto the pin (2) in
the grooves provided.
USA 800-435-0786 Fax: 800-451-2632
815-397-7070 Fax: 815-397-1865
Canada 800-435-0786 Fax: 800-524-2853
International +1-815-397-7070 Fax: +1-815-397-9247
4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070
An ISO 9001 Company • Greenlee Tools, Inc.
www.greenlee.com
4, 6
5. Remove the retaining ring (4) and trigger pivot pin
(6), which secures the trigger interlock assembly.
Remove and discard the trigger assembly, trigger
pivot pin, and retaining rings.
6 . Assemble the new trigger interlock assembly to the
tool in reverse order from step 5 above.
Parts List
UPC No.
Key 78-3310- Part No. Description Qty
1 04797 50047973 Trigger ........................................ 1
2 04800 50048007 Pin .............................................. 1
3 04798 50047981 Safety latch ................................ 1
4 42827 50428270 Retaining ring ............................. 4
5 04799 50047990 Torsion spring ............................ 1
6 42547 50425471 Trigger pivot pin ........................ 1
  • Page 1 1
  • Page 2 2

Greenlee 04796 Trigger Interlock Assembly for 43180, 43177 User manual

Greenlee
Brand
Greenlee
Model
04796 Trigger Interlock Assembly for 43180, 43177
Category
Car kits
Type
User manual
This manual is also suitable for

Greenlee 04796 Trigger Interlock Assembly for 43180, 43177 Manual is a replacement part for several Greenlee chain saws and the 43180 overhead circular saw. This assembly includes a trigger, safety latch, pin, torsion spring, and retaining rings. It is essential for ensuring the safe operation of your saw by preventing accidental triggering. Refer to your saw's instruction manual for proper installation and use.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers