Sanyo DC-F430AV User manual

Brand: Sanyo

Model: DC-F430AV

Category: Cassette players

Type: User manual

This manual is also suitable for

—

IFILE No.

Service Manual

Contents

Mini Component System

DC”F430AV (AU)

Specifications ................................................................... 1

What to do if ..................................................................... 1

Laser beam safety precaution ..........................................2

Removal and installation ..................................................2

CD changer opration and description ..............................4

CD chenger replacement .................................................6

CD mechanism adjustments ............................................8

c CD pickup maintenance .................................................. 10

CD player adjustments ..................................................... 10

Tape deck adjustments .................................................... 12

Tuner adjustments ........................................................... 14

Exploded view

(Cabinet & Chassis) ...................................................... 15

(Tape mechanism) ........................................................24

(CD changer mechanism 1/2 ) ......................................25

(CD changer mechanism 2/2 ) ...................................... 27

(CD base mechanism) ..................................................28

Parts list

(Cabinet & Chassis) ...................................................... 16

(Tape mechanism) ........................................................23

(CD changer mechanism) .............................................26

(CD base mechanism) ..................................................28

PRODUCT CODE No.

12953005

IC block diagram ..............................................................29

FL display& description ...................................................38

Schematic diagram

(CD) ...............................................................................4l

(DEcK) ..........................................................................43

(FRONT) .......................................................................47

(TUNER) .......................................................................5l

(PRE AMPLIFIER) ........................................................55

(POWER AMPLIFIER) ..................................................57

Wiring diagram

(CD) ...............................................................................4O

(DEcK) ..........................................................................45

(FRONT) .......................................................................49

(TUNER & PRE AMPLIFIER) ........................................ 53

(POWER AMPLIFIER) ..................................................59

Wiring connection

............................................................ 61

IC & Transistor voltages

................................................... 62

——— ——— ——— ——— ——— ——— ——— ——— —

‘This service manual consists of “DC-F430AVU” (Main unit),

~RB-F430AV” (Remote control), “SX-F430, SX-CE430, SX-SR430” (Speaker system)u

‘i-

——— ——— ——— ——— ——— ——— ——— ——— —

REFERENCE No. SM580918

SPECIFICATIONS

Amplifier section

Output power

Main amplifier ...............

40 W x 2 (at 6 ohms, 10% distortion)

Center amplifier ............

40 W (at 8 ohms, 10% distortion)

Surround amplifier ........

20 W x 2 (at 16

ohms, 10% distortion)

Inputs ...............................

VIDEO / DVD IN: 400 mV / 50k ohms

outputs ............................

FRONT SPEAKERS: 6 ohms

CENTER SPEAKER: 8 ohms

SURROUND SPEAKER :16 ohms

PHONES :8-32 ohms

SUB WOOFER: 10k ohms

Tuner section

Reception frequency ........ FM :87.5-108 MHz

AM :522-1710 kHz (9 kHz step)

520-1710 kHz (10 kHz step)

CD player section

Type ................................. Changer, 3-disc

Channels .......................... 2-channel stereo

Sampling frequency .........44.1 kHz

Pick-up ............................. Optical 3-beam

semiconductor laser

Frequency response ........20 Hz to 20 kHz

Wow and Flutter ............... Below measurable limits

Cassette deck section

Track system ................... 4-track, 2-channel stereo

Frequency response ........

50 Hz -15 kHz (Cr02 tape)

50 Hz -14 kHz (Normal tape)

Signal to noise ratio .........60 dB (Dolby NR ON)

Wow and Flutter ............... 0.129’0 (WRMS)

Fast forward /

rewind time ............ Approx. 110 sec. (C-60)

General

Power requirements ......... AC 230-240 V, 50 Hz

Power consumption .........130 W

Dimensions (W x H x D) .. Approx. 270x 330x 333 mm

Weight .............................. Approx. 9.8 kg

Speaker systems

Front speaker system (SX-F430)

Type ....................................... 3 way bass reflex

Drivers

................................... Woofer: 13 cm cone type

Mid range: 5 cm cone type

Tweeter: piezoelectric

Maximum

Power-handling capacity .....80 W (peak)

Nominal impedance ...............6 ohms

Dimensions (W x H x D) ........ Approx. 210x 330x 240 mm

Weight .................................... Approx. 3.6 kg

Center speaker system (SX-CE430)

Type ....................................... Bass reflex

Unit used ................................ Full range, 10 cm cone type

Maximum

Power-handling capacity .....80 W (peak)

Nominal impedance ...............8 ohms

Dimensions (W x H x D)

........ Approx. 270x 130x 184 mm

Weight .................................... Approx. 1.4 kg

Surround speaker system (SX-SR430)

Type ....................................... Bass reflex

Unit used ................................

Full range, 10 cm cone type

Maximum

Power-handling capacity .....40 W (peak)

Nominal impedance ...............16 ohms

Dimensions (W x H x D) ........ Approx. 210x 130x 162 mm

Weight

.................................... Approx. 0.9 kg (per speaker)

Specifications subject to change without notice.

To achieve the best sound performance, select music sourceswhich have

the ❑DI 00LDYwmouw]~ mark.

Manufactured under license from Dolby Laboratories Licensing

Corporation.

DOLBY, the double-D symbol ~ and “PRO LOGIC are trademarks of

Dolby Laboratories Licensing Corporation.

WHAT TO DO IF

* If the operation of the unit or display is not normal, or you wish to

clear the contents of the memory.

Disconnect the power cords plug from the electrical outlet.

Press the

RESET button for at least 30 seconds.

Connect the power cord.

Press the

POWER button to turn the power on.

RESET

-1-

—

LASER BEAM SAFETY PRECAUTION

● Pick-up that emits a laser beam is used in this CD player section.

I CAUTION- INVISIBLELASERRADIATIONWHENOPENAND

INTERLOCKSDEFEATED.AVOIDEXPOSURETOBEAM.

ADVARSEL- USYNLIGLASERSTRALINGVEDABNING,NAR

SIKKERHEDSAFBRYDEREERUDEAFFUNKTION,UND~ UDSH_TELSE

FORST~LING.

VARNING- OSYNLIGLASERSTl%d-NINGNARDENNADELAROPPNAD

(XH SPARRARURKOPPUD.STtiLEN ARFARLIG.

VORSICHT- UNSICHTBARELASERSTRAHLUNGTRITTAUS,WENN

DECKELGEOFFNETUNDWENNSICHERHEITSVERRIEGELUNG

UBERBRUCKT15T.NICHT,DEM5TRAHLAussETzEN.

VARO- AVATTAESSAJASUOJALUKITUSOHITETTAESSAOLETALTTIINA

NAKYMATTOMALLEIASERSATEILyLLE.ALAKATSOSATEE5EEN.

/ f

‘L

CAUTION :

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT

IN HAZARDOUS RADIATION EXPOSURE

LASER OUTPUT ...............

0.6 mW Max. (CW)

WAVELENGTH ..................790 nm

.,:.,

REMOVAL AND INSTALLATION

—

●

Pressthe POWFR button and check that the STANDBYLF~ Iiab

● Disconnect the power cord’s plug from the electrical outlet.

● All wiring should be returned to the original position after work is completed.

● First have ready may the new FIXERS(614 129 4971) for replacement..

● Arrange the lead wires so that they are not near the heat sink.

1. CABINET ASSY

2. CD MECHANISM BLOCK

-2-

REMOVAL AND INSTALLATION

3. FRONT PANEL BLOCK

5. PRE AMPLIFIER& POWER P,W.BAORDS

7. TAPE MECHANISM BLOCK

/’

4. FRONT P.W.BOARD BLOCK

6. POWER TRANSFORMER

$)@

It?

8. WIRING LAYOUT

POWER f?W.B

‘-

.-.”

FIXER -

-3-

CD CHANGER OPERATION AND DESCRIPTION

—

● This set is capable of stocking and playing up to 3 CDs.

* While playing a CD, other discs can be replaced.

In this case, press the button for the disc No. you wish to remove, and then press the OPEN/CLOSE button,

● When the “POWER” button is turned off, the power turns off after the discs are loaded in the discs trays.

1. MOTOR& MECHANISM SWITCHES LAYOUT

LOAD/UNLOADMOTOR

UNLOADSWITCH(SW5J

LOADSWITCH(SW3)

7 ,z25v ‘~’ SW’TCH(SW’)--------------. .

OPEIWCL

MOTOR

2. FUNCTION

CLOSEENIJSWITCH

(1) OPEN/CLOSE

OPEN/CLOSE RACK GEAR

1. The rotation of the OPEN/CLOSE MOTOR rotates the

[qgw

OPEN/CLOSE IDLER GEAR via the BELT and PULLEY, ‘_, ~—-

and the RACK GEAR which is intermeshed with the

OPEN/CLOSE IDLER GEAR moves forward during

“OPEN”, backwards during “CLOSE’.

BELT

OPENEND

SWITCH

The HOME POSITION is reached when the largest

square hole in the UP/DOWN CAM GEAR is between

the SENSORS.

UP/ DOWNCAMGEAR1

2. Rotate the UP/DOWN CAM GEAR counter-clockwise

‘u--

(with OPEN/CLOSE during PLAY) or clockwise (with

[.~~

normal OPEN/CLOSE), raise the GEAR-BLOCK

BRACKET, stop at the selected TRAY, hold the TRAY

‘6”

GUIDE by means of the OPEN/CLOSE RACK and save

the other TRAY GUIDES.

The OPEN/CLOSE motor start running, the OPEN/

SENSORP.W.B

CLOSE RACK moves forward, the TRAY LOCK LEVER

is raised

to lock the TRAY, and the OPEN operation

commences.

GEARBLOCKE~CKET

TRAYSLIOE

:-”

:.,

.,.

...”

.,-

...-

,.-

.y ,

—UP/00WN

CAhi

GEAR 2

UP/ 00WN

ORIVE GEAR 2

-4-

CD CHANGER OPERATION AND DESCRIPTION

4. When the TRAY closes and it reaches the tip of RIB part of LEFT TRAY GUIDE, the LOCK LEVER is lowered to release the

TRAY, and loading proceeds.

TRAYGUIOEHOLDER

LOCKLEVER

OPEN~ CLOSE

RiB

TRAY LOCK

TRAYRELEASE

(2) LOADING

1. The rotation of the LOAD/UNLOAD MOTOR rotates the LOAD/UNLOAD DRIVE GEAR in the clockwise direction.

2. The DRIVE GEAR and the gear portion of the TRAY mesh together and the TRAY movers backward.

3. The completion of TRAY movement causes the UP/DOWN MOTOR to operate and lower the TRAY HOLDER putting the unit to

chucking

TRAY

status.

4. The rotation of the UP/DOWN MOTOR rotates the UP/

DOWN GEAR in the counter-clockwise direction. In

connection with this, the TRAY HOLDER SLIDE moves

forward, and at the same time, the RIGHT SLIDE is moved

backwards by the SYNCHRO LEVER.

LEFT

RIGHTSLIDEBRACKET ‘

L LOAO/UNLOAO DRIVE GEAR

,..-“1

SYNCROLEVER

UPIOOWN CAM GEAR 1

UP/OOWN IOLER 2

UPIOOWN ORIVE GEA? 1

/ UP/OOWNIOLERl

&iKim’\./ I UPIOOWN MOTOR

UPICOWN

ORIVE GE

UP/DOWN IOLER 1

UPIOOWN ORIVE GEAR 2

\UPiDOWN IOLER2

UPICK3WNCAM GEAR 2

-5-

CD CHANGER REPLACEMENT

LOAD/UNLOAD FUNCTION

1.Remove the B TOP ENCOURAGE.

2. Remove the CD MECHANISM.

HOW TO REMOVE THE TRAYS

1.Remove the CHUCK BRACKET.(O -~)

RAGE

2. Rotate the UP/DOWN CAM GEAR and position the collar

3. Remove the three TRAYS through the gap at the back.

part of the TRAY HOLDER visible from the RIGHT SLIDE

TRAYASSY

at the

midpoint between the CHUCKING and TRAY.

RIGHT SIDE

DISCSTOPPER 8RA~KET

kti

1“

RIGHTSLIDE

CENTER

3. REPLACING THE TRAY GUIDE

● Have the LEFT TRAY GUIDE HOLDER and TRAY GUIDE ready before proceeding.

1. Turn the UP/DOWN CAM GEAR and remove the setscrew of the TRAY HOLDER from the hole in the GEAR BLOCK BRACKET.

2. Turn the UP/DOWN CAM GEAR counter-clockwise as far as it will go, and remove the SCREWS.

Remove the five set screws of the LEFT TRAY GUIDE

HOLDER, and remove it in the direction of the arrow.

When assembling the parts, align the TRAY SLIDE and UP/

DOWN DRIVE GEAR.

-6-

UPIOOWN

MARK

DRIVEGEAR

TRAYSLIDE

‘----U

HI@

CD CHANGER REPLACEMENT

4. LEFT SLIDE BRACKET

5. UP/DOWN CAM GEAR

6. LOADAJNLOADGEAR

___ _—— ——— ——— —

Note:

EM-50L ....................

MOLYKOTE, EM-50L

, SG-7

........................ SAN GREASE. SG-7 ,

8. TRAY HOLDER

1 G474B .................... FLOILOIL. G474B I

L ——— ——— ——— ——— —

7. SETTING UP THE LOADAJNLOAD GEAR

dl -

LOAD/UNLOADCAM GEAR

/-- LOACUUNLOADMOTOR

2LT

f- Lo/JJIJNL(JAD IDLI=R 1

~j~ l! LoAD/uNLoADlDLER2

‘LOAD/UNLOAD DRIVE GEAR

SETTING UP THE TRAY SLIDE& UP/DOWN DRIVE GEAR 2

●

Slide the TRAY SLIDE forward until it goes no further.

Align the round mark on the UP/DOWN DRIVE GEAR 2.

with the mark area on the TRAY SLIDE, and install.

Align the shorter flat part of the UP/DOWN CAM GEAR 2,

and install.

Set the parts in such a way that the round marks on the two

GEARS are horizontal.

UP/DOWN DRIVE GEA

WN CAM GEAR 2

LONG

-7-

CD CHANGER REPLACEMENT

—

10. SEITING UP THE TRAY HOLDER AND UP/DOWN DRIVE GEAR

UP/OOWN DRIVE GEAR 1

Loosen and install the SET SCREW of the SENSOR P.W.B.

.— .—

2. Slide the TRAY HOLDER SLIDE forward until it goes no

-’\

further.

3. Align the round mark on the UP/DOWN DRIVE GEAR 1 with

the mark area on the TRAY HOLDER SLIDE, and install.

UP/OOWNCAMGEAR2

4. Secure the screw.

● Set the parts in such a way that the round marks on the two

5. As shown in the figure, place the UP/DOWN DRIVE GEAR 2

GEARS are horizontal.

rfi

❑

and UP/DOWN CAM GEAR 2 in such a way that they are

horizontal.

6. Align with the triangular mark through the hole through which

the UP/DOWN CAM GEAR 2 teeth are visible.

7. Secure the SCREW of the SENSOR and GEAR.

MARK

“--o

GEAR BLOCK DRIVE SLIDE

11. UP/DOWN MOTOR

UP/OOWN MOTOR ASSY—

d’

10.5mm

(614 287 0440)

CD MECHANISM ADJUSTMENTS

1. WIRING OF THE CD MECHANISM

t.K3TOR h LIMIT SW P.W.B

LuG

.uG

%+$h

U~Pil&{N

SENSOR

II -... “

2. MOTOR REPLACEMENT AND LUBRICATION

SLED

MOTOR ,

SPINDLE

MOTOR

i -’u””-

+PLUS MARK +PLUS MARK

.—— — ———— ——.

‘ Note

I EM-50L

........... MOLYKOTE, EM-50L

! ~i;;B ...........oSAN GREASE, SG-7

........... FLOIL OIL, G-474B

-8-

!ljJ

1,/

SPINOLEMOTOR

~ G:~;jS t

SLEDRETARDGEAR 1<

SLEDRETARDGEAR2

t4J ~~

—PICK RACKGEAR

-1

SLED GEAR

GREASE

G-474’

SLED MOTOR “ -““

MOTOR & LIMIT SW P.W.B

CD MECHANISM ADJUSTMENTS

3. CD MECHANISM

AB;C#L

BOND

(1) Replacement of the spindle motor

.,:%~w

+ R

c First, prepare thenewturntable andnewspecial washer for

replacement. The removed turntable will be deformed by

BOND ~

the heat of the soldering iron, and cannot be reused.

2mm

● Prepare dial-type calipers.

WASHE “ I ABOUT

1. The attached bonding material can be dissolved by using a

--f-Smm

60 W soldering iron to heat the shaft the upper part of the

turntable for about one minute.

2. The turntable can then be removed from the shaft by very

carefully applying force upward at the center of the lower

surface of the turntable.

Remove the two screws and remove the spindle motor.

Attach the special washer top the spindle motor.

Clean the spindle motor’s shaft. To clean them, use a soft

?!5’

7.5 * 1).lmm

34.9 i O.lmm

cloth soaked in isopropyl alcohol.

!’

—TURNTABLE

Apply a small amount of a mixture of the “ Three bond

2001” and “2015F” bonding materials to the motor’s shaft.

Igi@

Install the turntable as shown in the figure.

Secure the turntable by pressing gently.

Be sure to wipe

away (by using a piece’ of cloth, or similar material) any

bonding material coming out of the hole.

(2) Replacing the pick-up

1. insert the pick-up rail into the base chassis.

2. If the rack of the base chassis are missing when the pick-up

rail have been installed, first wipe the tips of the rail with

SHAFT

WASHER “,

SPINDLE MOTOR

alcohol.

3. After the pick-up has been replaced, apply grease

(FLOIL

“

SLED MOTOR : “““

“ A“

G-4746) to the ~ sections.

-1

\iA

The pick-up P.W.Board pattern is “shorted”, as shown in

the figure, so that the new pick-up will not be susceptible to

PICKUP RACK GEAR

the effects of static.

5. Set the pattern to

“open” after the

replaced.

—

pick-up has been

(BE SURE AT THIS TfME, NOT TO TOUCH ANY OIHER PART.)

@l @

ja~+az

(SHORT)

(OPEN)

-9-

CD PICKUP MAINTENANCE

About pick-up (Optical lens) Cleaning

Clean the lens with the specified cleaning disc or moisten a cotton swab with isopropyl alcohol and cleaning paper.

Specified cleaning disc: LC-1 (Part code: 645 026 1961 ..... manufactured by SANYO.)

Regarding procedure of cleaning with moisten cotton swab, please refer to the attached as follows.

1. Cotton swab wrapped with Cleaning paper.

2. Add the isopropyl alcohol.

3. Gently move the tip of cotton swab just like a draw a whirlpool from inside to outside on the surface of lens.

CD PLAYER ADJUSTMENTS

PREPARATION

Measuring instruments, tools and filter

1. Test disc. : YEDS 18 (SONY) or etc.

2. Oscilloscope : SS5711 (1 OMHZ or dual-phenomenon) or

Memoryscope: DSS6521 (Storagescope)

3. Screwdrivers (non-metallic) for adjustments

2. INITIALIZATION OF VR101

VR1OI Initialization position

3. PARTS LOCATION

TRACKING

BALANCE

RI 108

(lOk~)

TP2(FE)

TP1’(RF)

VR101

}

TRACKING

SALANCE

(-) 1

EYE PATTERN

4. CABLE CONNECTION

ASSY, CONNECTOR-S (614 296 0042)

@ ASSY,CONNECTOR-S (614 265 0219)

@ ASSY,CONNECTOR-S (614 296 0035)

~111

dt%m

CN131(16 pin)

Vii&4..

-1o-

CD PLAYER ADJUSTMENTS

5. ADJUSTMENTS

Adjustment Measuring Service output

Adjustment

Adjustment value

Item

instrument

mode

connection

location

(a) Tracking Oscilloscope

yes TP3 : TE

VR101 Waveform symmetry

balance TR4 : VC

A=B

(b) Checking Check be sure that the “eye”

the “eye”

Oscilloscope

TP1 : RF

pattern is at the center of the

pattern TP4 : VC waveform and that the diamond

shape is clearly defined

(1) Tracking balance adjustment

1. Connect an Oscilloscope to TP3 (TE) and TP4 (VC).

2. Turn “POWER” switch on.

Set the test disc. (DISC 1)

4. Press “SOUND PRESET” key and “TUNING MODE key

simultaneously, whthin 1 second after pressing the

“MEMORY” switch.

(SERVICE MODE: Tracking balance adjustment mode)

5. Confirm that the oscilloscope waveform is symmetrical on

the top and bottom in relation to OV (VC).

6. If it cannot be adjusted by fully rotating VR1 01, cut the

resistor R1108 (1OkQ) with a pair of pliers, and adjust

again.

7. To cancel service mode, disconnect the power cord’s plug

from the electrical outlet.

CH1. 5CQTV CH2. wJmV:

; *Y

Cnlol Dclo 1 :

,::

Ov(vc) A

::: :

200mV/div.

5ms/div.

(2) Checking the “eye” pattern

Switch “ON” the POWER.

TP1

(RF)O

Connect an oscilloscope to TP1 (RF) and TP4 (VC).

OSCILLOSCOPE

3. Load the test disc.

TP4

PLAY/PAUSE switch push ON.

(l/c)”

5. Check to be sure that the “eye” pattern is at the center of

waveform and that the diamond shape is clearly defined.

6. Press the STOP button.

7. Switch “OFF the POWER.

+-1

ENING EXPANDED

—

-11-

TAPE DECK ADJUSTMENTS

Adjustment Item Test Tape Measuring Srevice Mode

Adjust Adjust

Instrument

location value

(1)

HEAD AZIMUTH V-IT-736 AC-voltmeter

HEAD AZIMUTH Max.

TAPE “A” (1OKHZ) SCREW (FWDIREV)

(2) HEAD AZIMUTH vl-r-73B

AC-voltmeter HEAD AZIMUTH

—

Max.

TAPE “B” (1OKHZ) SCREW

(3-a) MOTOR SPEED

MTT-211 FREQUENCY COMPUTER REC

VR311 (TAPE“A”) 3,000Hz

(HIGH) (1,500Hz) COUNTER

(HIGH)

VR313 (TAPE “B)

(3-b) MOTOR SPEED

MlT-l 11 FREQUENCY COMPUTER REC

VR312 (TAPE “A”)

3,000Hz

(NORMAL) (3,000Hz)

COUNTER (NORMAL)

VR314 (TAPE“B”)

1. HEAD REPLACEMENT AND AZIMUTH ADJUSTMENT

(l)Head replacement

1. After replacement, demagnetize the heads

by using a

degausser.

2. Be sure to clean the heads before attempting to make any

adjustments.

3. Be sure both channels (1 and 2) are the same level.

(Using a dual-channels oscilloscope)

4. All wiring should be returned to the original position after

work is completed.

(2)Head azimuth

. TApE llAI1

1. Load a test tape (VTT-738, etc.:l OKHz) for azimuth

adjustment.

Press the FORWARD PLAY button. (Normal playback)

3. Use a flat-tip (-) screwdriver to turn the screw for normal

azimuth adjustment so that the left and right outputs are

maximized at the same phase during normal playback.

TAPE “A”

PLAY HEAD

(ELLOWT

rRED

WHITE

TAPE “B”

R / P HEAD

‘“cKeED

~ E. HEAD

4. Press the Tape “A REVERSE MODE button.

5. Play the tape in the reverse mode.

6. Use a flat-tip (-) screwdriver to turn the screw for reverse

azimuth adjustment so that the left and right outputs are

maximized at the same phase during reverse playback.

7. Press the STOP button.

● TAPE “B”

1. Load a test tape for (VTT-738, etc.:l OKHz)azimuth

u\ .\

adjustment.

2. Press the FORWARD PLAY button.

3. Azimuth screw adjustment.

4. Press the STOP button.

= PUSH

———— ———— ———— —.

● After making the adjustment, secure the azimuth

adjustment screw by applying screw lock (TB-1 401 B). 1

L ——— ——— ——— ——— ——— .—

-12-

TAPE DECK ADJUSTMENTS

(3)Motor speed

a. HIGH SPEED

1. Insert the test tape (TCW-211 or etc. 1,500 Hz optional)

into Tape “A” or “B”.

2. Press the “FM MODE& SOUND PRESET” buttons at the

same time.(o)

3. Press the TAPE STOP button.(@)

4. Press the COMPUTER REC “HIGH” button.(@)

(Service mode : High speed)

5. AdjustVR311 (Tape “A”)orVR313 (Tape “6) so that the

frequency counter show a reading of 3,000 Hz.

6. Press the

STOP button.

~lON @

(Cancel service mode)

FM MODE 6)

CO*

NORivlAL

SPEED (@)

b. NORMAL SPEED

Insert the test tape (TCW-111 or etc. 3,000 Hz) into Tape

,,Al,or ,,B,,

2. Press the COMPUTER REC “NORMAL” button.(@)

(Service mode : Normal speed)

TAPE STOP @ SOUND PRESET @l

3. Adjust VR312 (Tape “A’) or VR314 (Tape “B”) so that the

frequency counter show a reading of 3,000 Hz.

4. Press the STOP button.

5. To cancel service mode,

press the “~/ON “ button. (@)

,W06 ~ :%;

J3005

SPEED

TAPE “A”

SPEED

%;’

HIGH SPEED

TEST POINT

VR314

VR313

NORMAL

TAPE “B”

J3002

HIGH’SPEED

TEST POINT

—

2. CHECKING THE MECHANISM TORQUES

1. Clean the head, capstan and pinch roller before making any measurement.

2. Check the both normal and reverse playback.

Measurement

Take-up torque

Back tension Tape tension

Cassette for PLAY :TW-211 lA(FWD)

PIAY:TW-211 lA(FWD) Drive-power cassette

measurement PIAY : TW-2121A(REV)

PIAY :TW-2121A(REV) TW-2412(FWD)

F.FWDIREW : TW-2231 TW-2422(REV)

PLAY

28- 63gr.cm 2.0- 4.5gr.cm 70 gr or more

F. FWD/REW

60- 120gr.cm

-13-

TUNER ADJUSTMENTS

PARTS LOCATION

AN;E”NNA

75Q

AM LOOP

ANTENNA

TP11(H)

—~J2103

W103

J2104~

❑

TP12(E)

‘T

L2151-A

TP13(L)

TP1 5(E)

J2028/

TP14(R)

[ ] J4313

J2032

SG RF Level: 75Q open Voltage dBIV

Antenna

:75Qunbalanced, Modulation:l kHz

1.FM

Dev.

: *22.5 kHz(MONO) + 22.5KH2

Connection

SC set

Circuit Input output

Frequency

Position

1 Cover

---

Connect Digital DC voltmeter to

87.5MHZ

Low

voltage

---

TP1 l(H), TP12(E).

108.OMHZ High

Tracldng Connect FM SG to Connectto VTVM

90.OMHZ

Low

Anntena.

TP13(L) or TP14(R), TP15(E).

106.OMHZ

High

2.AM

Step

STEREO) *6.75KHz(PIL0

---

More than 0.8V

---

Lessthan 8.OV

I2103 Maximum

---

SG Modulation

Antenna, IRE

Loop, Disti

Adjusting Connection

SG set Adjustment

Circuit input

output

Frequency Position

Cover

---

Connect Digitai DC voltmeter to

522kHZ Low

---

voJtage

---

TP1 l(H), TP12(E).

171OkHZ High

---

Tracking

connect AM SG to

Connect to VTVM

603KHZ Low L2151-A

Test loopAnntsna.

TP13(L) or TP14(R), TP1 5(E). 1404kHZ

High

---

IT)

:1 kHz, 30’%0

nce: 60 cm

Mofe than 1.OV

Lessthan

8.OV

AF Maximum

-14-

EXPLODED VIEW (CABINET & CHASSIS)

-N+

m.%

‘\

‘ \,

‘/

“k----;

._.J g

, — —-—

—

-15-

PARTS LIST

..-

. PRODUCT SAFETY NOTICE

EACH PRECAUTION IN THIS MANUAL SHOULD BE FOLLOWED DURING SERVICING. COMPONENTS IDENTIFIED WITH THE IEC

SYMBOL A IN THE PARTS LIST AND THE SCHEMATIC DIAGRAM DESIGNATED COMPONENTS IN WHICH SAFETY CAN BE OF

SPECIAL SIGNIFICANCE. WHEN REPLACING A COMPONENT IDENTIFIED BY A , USE ONLY THE REPLACEMENT PARTS DESIGNATED,

OR PARTS WITH THE SAME RATINGS OF RESISTANCE, WATTAGE OR VOLTAGE THAT ARE DESIGNATED IN THE PARTS LIST

IN THIS MANUAL. LEAKAGE-CURRENT OR RESISTANCE MEASUREMENTS MUST BE MADE TO DETERMINE THAT EXPOSED

PARTS ARE ACCEPTABLY INSULATED FROM THE SUPPLY CIRCUIT BEFORE RETURNING THE PRODUCT TO THE CUSTOMER.

CAUTION : Regular type resistors and capacitors are not listed. To

know those values, refer to the schematic diagram.

Regular type resistors are less than 1/4 W carbon type and O

ohm chip resistors.

Regular type capacitors are less than 50 V and less than 1000 PF type of

Ceramic type and Electrical tYPe.

N.S.P : Not available as service parts.

PACKING & ACCESSORIES

REF. NO.

PART NO.

6142953402

6142916988

6142916995

6142690949

6142953433

6450051227

6142450055

6450265259

6450292118

CABINET & CHASSIS

HEF.NO,

f-- 46

PAFIT NO.

6142916629

6142904947

6142916575

6142916551

6142952832

6142990728

6141291901

6142641884

6142661918

6142918333

6142918050

6142916377

6141299136

6142952764

6142952771

6142969861

6142969878

6142657898

6142657904

6142907429

6142907436

6142907078

6142907061

6142918302

6142939932

6142952788

6142907085

6142907399

8142952795

6142916384

6142907412

6142918326

6142916612

6142907115

6142952702

6142708316

6142678312

6142891117

6142891100

DESCRIPTION

CARTON CASE, SYSTEM

CUSHION, TOP

CUSHION, BOTTOM

CUSHION, SET

INSTRUCTION MANUAL

ASSY,ANTENNA,LOOP,AM

ANTENNA,FM

REMOTE CONTOROL,RB-F430AV

BATTERY COVER, REMOTE CONTROL

DESCRIPTION

SHIELD, POWER TRANSFORMER

ASSY,CABINET,BOTTOM

MOUNTING,SIDE PWB FIX

MOUNTING, PWB,HEAT SINK+PWB

PANEL,REAR

FIXER,AC CORD

JOINT, CD-MECHA FORCEMENT

MOUNTING, EARTH,CD MECHA

COVER PICK,CD

ASSY,CABINET

LUG,CD MECHA LEAD FIX

DEC,WINDOW,CASSEITE, DECK L

DEC,WINDOW,CASSEITE, DECK R

COVER, CASSETTE,DECK L

COVER,CASSETTE, DECK R

ASSY,LID,CASSETTE, DECK L

ASSY,LID,CASSETTE, DECK R

SPRING, WIRE, CASSETTE L

SPRING, WIRE, CASSETTE R

KNOB, ROTARY,TUNING JOG

KNOB, ROTARY, VOLUME JOG

ASSY,DEC RING,JOG

DEC,PANEL,FRONT L

DEC,PANEL,FRONT R

DEC,WINDOW,FL

DEC,WINDOW,CD DOOR, UNDER

DEC,WINDOW,CD DOOR,TOP

ASSY,DOOR,CD

SPRING,TENS,CD DOOR

DEC,WINDOW,LAMP,CD LAMP

REFLECTOR,CD DOOR LAMP

COVER, DOOR,CD

ASSY,PANEL,FRONT

ASSY,GEAR,CASSETTE

MOUNTING,GEAR FIX

MOUNTING, BRACKET,

DECK MECHA BOITOM

MOUNTING, BRACKET,

DECK MECHA TOP

REF. NO.

PART NO.

6142907023

6142907221

6142907184

6142907030

6142907382

6141299136

6142939888

6142907016

6142939871

6142907047

6142907368

6142907283

6142906996

6142907375

6142907290

6142907269

6142907276

6142916575

6142959282

6142983201

6141913698

6142762844

FIXING PARTS

REF. NO.

PART NO.

Yol

4110213701

Y02

4110282905

Y03

4110213503

Y04

4110209902

Y05

4110209902

Y06

4110209506

Y07

4110209902

Y08 4110209902

Y09

4110213503

Ylo

4110011901

Y11

4110011901

Y12

4110213503

Y13

4110014209

Y14

4110213701

Y15

4110213701

Y16

4110213701

Y17

4110213701

Y18

4110209902

Y19

4110213503

Y20

4110213503

DESCRIPTION

BUTTON, SURROUND MODE ETC

BUTTON, DECK, DOLBY,PLAY ETC

BUTTON, MEMORY, MEMORY ETC

BUTTON,TUNING,FM MODE ETC

DEC,WINDOW,STANDBY

LUG, FRONT LEAD FIX

BUITON,POWER

BUITON,COMPUTER REC

BUTTON,CD PLAY/PAUSE

BUITON,FUNCTION

DEC,SHEET,FUNCTION

REFLECTOR, FUNCTION

BUITON,DISC NO.,DISC SELECT

DEC,SHEET,DISC SELECT

REFLECTOR,DISC SELECT

REFLECTOR,AUTO ETC

REFLECTOR,LIVE ETC

MOUNTING,SIDE PWB FIX

SHIELD,TU ANT

SPACER, SHEET, CABINET BOITOM

LABEL, LASER PICKUP

LABEL, SAFETY, LASER PICKUP

DESCRIPTION

SCR S-TPG BIN 3X1 O,CABINET FIX

SCR S-TPG PAN 2X4, JOINT, MECHA

SCR S-TPG BIN 3X1O,

CD MECHA+FRONT

SCR S-TPG BRZ+FLG 3X8,

CD MECHA+MOUNTING EARTH

SCR S-TPG BRZ+FLG 3X8,CD PWB FIX

SCR S-TPG BRZ+FLG 3X16,

HEATSINK,POWER IC

SCR S-TPG BRZ+FLG 3X8,

HEAT SINK+MOUNTING PWB

SCR S-TPG BRZ+FLG 3X8,

HEATSINK, REG

SCR S-TPG BIN 3X1 O,CD COVER

SCR S-TPG BIN 3X6,CD COVER

SCR S-TPG BIN 3X6,

MOUNTING PWB+BOITOM

SCR S-TPG BIN 3X1O,

HEAT SINK+ BOITOM

SCR S-TPG BIN 4X8, TRANS FIX

SCR S-TPG BIN 3X1 O,BOTTOM+REAR

SCR S-TPG BIN 3X1 O,REAR

SCR S-TPG BIN 3X1 O,REAR,CD

SCR S-TPG BIN 3X1 O,REAR ANT

SCR S-TPG BRZ+FLG 3X8,AMP PWB

SCR S-TPG BIN 3X1O,

BOITOM+FRONT

SCR S-TPG BIN 3X1 O,CD-GND

-16-

PARTS LIST

REF. NO. PART NO.

Y31

4110213503

Y32

4110211400

Y33 4110213503

Y34 4110243706

ELECTRICAL PARTS

REF. NO.

PART NO.

A 6450268137

A 4230170106

6142916568

6142935170

75 A 6142565308

6450256806

6450256370

6450256431

6142951699

6142940778

6142615218

6142934326

DESCRIPTION

SCRS-TPG BIN3X1O,FRONT PWB

SCRS-TPGBIN2.3X 10,

CDDOOR+COVER

SCRS-TPGBIN3X1 O,DECKMECHA

SCRS-TPGPAN+FLG 2X6,

DECKMECHA+MOUNTI NGPWB

DESCRIPTION

POWER TRANSFORMER

FUSE 250V 1.6A,PRI.FUSE

MOUNTING, PWB,FOR REG

ASSY,HEAT SINK

POWER CORD

FLEXIBLE FLAT CABLE, FRONT-CD

FLEXIBLE FLAT CABLE,

PREAMP-DECK

FLEXIBLE FLAT CABLE, FRONT-DECK

PWB,REFLECTOR,FRONT SECTION

ASSY,WIRE,CD-PREAMP (CN162)

ASSY,WIRE,PLAY-H EAD (CN381)

ASSY,WIRE,R/P,E-HEAD (CN382)

POWER AMPLIFIER P.W.BOARD ASSY

REF. NO.

Coool

COO02

COO03

COO04

COO05

COO06

COO07

C4706

C4707

C4726

C4727

C4750

C4806

C4807

C4826

C4827

C4850

C4900

C4901

C4930

C4931

CN458

CN459

CN470

CN471

CN472

CN478

CN479

CN490

CN493

CN494

CN496

CN497

D4400

PART NO.

A 6142958322

4030570007

4030624700

4030570007

4030624700

4030572407

4031850108

4030677805

4030572407

4031850108

4030677805

4032000304

4033252207

4032000304

4033252207

4032003800

4033259701

4031977300

4033235408

6140206593

6142935194

6450241147

6450051029

6450118210

6450261916

6450090042

6140201222

6140206579

6142239230

6140206609

6142935200

6450090189

4070124406

DESCRIPTION

ASSY,PWB POWER (N.S.P)

POLYESTER O.OIU J 50V

POLYESTER 5600P J 50V

POLYESTER O.OIU J 50V

POLYESTER 5600P J 50V

POLYESTER 0.1 U J 50V

MT-POLYEST 0.47U J 50V

MT-COMPO 0.47U J 50V

POLYESTER 0.1 U J 50V

MT-POLYEST 0.47U J 50V

MT-COMPO 0.47U J 50V

ELECT 3300U M 35V

ELECT 4700U M 25V

ELECT 1000U M 25V

SOCKET,7P

ASSY,WIRE,POWER-PRE_AM P

TERMINAL

JACK, RCA

TERMINAL

CORD,TERMINAL,POWER-BOITOM

JACK, PHONE D6.43

SOCKET,3P

SOCKET,5P

SOCKET

SOCKET,8P

ASSY,WIRE,POWER-PRE_AMP

SOCKET,20P

DIODE 1SS133

REF. NO.

D441 O

D4411

D4412

D4420

04421

D4422

D4423

D4470

D4471

D4472

D4740

D4741

D4770

D4771

D4900

D4930

D4931

D4932

D4933

D4934

D4935

D4936

D4950

D4951

D4952

D4953

D4954

D4955

D4960

HS490

HS493

IC458

IC459

IC470

IC472

IC475

IC493

LG493

PR495

Q4400

:4410

Q4420

;4430

Q4431

Q4432

04433

Q4434

Q4435

-17-

PART NO.

4070124406

4070995303

4070124406

4070639504

4070124406

4070124208

A 4071271505

A 4071076001

4070124406

4070996805

4070124208

4070999905

4070995204

4070124206

4070124208

4070996805

6142640159

6142666500

4094040300

A 4093996608

4092116601

4091452809

4093968704

6450238987

A 6450274169

4050118609

4050118500

4050156403

4050156205

4050118609

4050118500

4050156403

4050156205

4050118609

4050118500

4050156403

4050156205

4050163500

4050163302

4050163500

4050163302

4050163500

4050163302

4050163500

4050163302

4051413406

4051413505

4050052002

4050051906

4050118609

4050118500

4050156403

4050156205

DESCRIPTION

DIODE 1SS133

ZENER DIODE MTZJ5.6B

DIODE 1SS133

ZENER DIODE MTZJ8.2B

DIODE 1SS133

DIODE 1SS131

DIODE RBV-602LF-A

DIODE RL203-BD80

DIODE R1203-BD80

DIODE 1SS133

ZENER DIODEMTZJ136

ZENER DIODE MTZJ13B

DIODE 1SS131

ZENER DIODE MTZJ33B

ZENER DIODE MTZJ5.1 B

DIODE 1SS131

ZENER DIODE MTZJ13B

HEAT SINK, FORD4900

HEAT SINK, FORIC493

IC TC9210P

IC TC921OP

Ic STK407-050

IC NJM4558L

IC NJM7805FA

IC KIA7805PI

FIXER

PROTECTOR,0.125A 125V

TR2SC1740S-S

TR2SC1740S-R

TR 2SC2785-F

TR 2SC2785-E

TR 2SC1740S-S

TR 2SC1740S-R

TR 2SC2785-F

TR 2SC2785-E

TR 2SC1740S-S

TR 2SCI 740S-R

TR 2SC2785-F

TR 2SC2785-E

TR 2SC2909-T

TR 2SC2909-S

TR 2SC2909-T

TR 2SC2909-S

TR 2SC2909-T

TR 2SC2909-S

TR 2SC2909-T

TR 2SC2909-S

TR KTA1266-GR

TR KTA1266-Y

TR 2SA733-P

TR 2SA733-K

TR2SC1740S-S

TR2SC1740S-R

TR 2SC2785-F

TR 2SC2785-E

PARTS LIST

REF. NO.

Q4436

Q4437

Q4441

Q4470

Q4471

Q4700

Q4720

Q4740

Q4770

Q4790

Q4800

Q4820

Q4870

Q4890

Q4930

Q4931

Q4932

Q4933

Q4934

Q4935

:4950

Q4960

Q4961

k ‘r

PART NO.

4050118609

4050118500

4050156403

4050156205

4050118609

4050118500

4050156403

4050156205

4050118609

4050118500

4050156403

4050156205

4051413406

4051413505

4050052002

4050051906

4051413406

4051413505

4050052002

4050051906

4050336805

4050336706

4050336805

4050336706

4050118609

4050118500

4050156403

4050156205

4050336805

4050336706

4050336805

4050336706

4050336805

DESCRIPTION”

TR2SC1740S-S

TR2SC1740S-R

TR2SC2785-F

TR2SC2785-E

TR2SC1740S-S

TR2SC1740S-R

TR2SC2785-F

TR2SC2785-E

TR2SC1740S-S

TR2SC1740S-R

TR2SC2785-F

TR2SC2785-E

TRKTA1266-GR

TRKTA1266-Y

TR2SA733-P

TR2SA733-K

TRKTA1266-GR

TRKTA1266-Y

TR2SA733-P

TR2SA733-K

TR2SD1468S-S

TR2SD1468S-R

TR2SD1468S-S

TR2SD1468S-R

TR2SC1740S-S

TR2SC1740S-R

TR2SC2785-F

TR2SC2785-E

TR2SD1468S-S

TR2SD1468S-R

TR2SD1468S-S

TR2SD1468S-R

TR2SD1468S-S

REF.NO.

Q4962

R4430

R4431

R4436

R4437

R4707

R4727

R4750

R4790

R4807

R4827

R4850

R4890

R4902

R4903

R4906

R4907

R4930

R4931

R4938

R4954

R4955

R4962

RY440

RY441

RY474

SAOO1

SA490

T4900

PART NO.

4050118609

4050118500

4050156403

4050156205

A 6142420126

A 4020723505

A 4020795601

A 4020786405

A 4020723505

A 4020795601

A 4020788405

A 4020717207

A 4020795007

A 4020792808

A 4020710307

A 4020792709

A 4020711304

A 4020792808

A 4020792709

6450237171

6450237164

4110216405

4110209902

6142391839

DESCRIPTION

TR2SC1740S-S

TR2SC1740S-R

TR2SC2785-F

TR2SC2785-E

RESISTOR 0.22 K- 3W

RESISTOR 5.6 J- lW

RESISTOR 0.22 J- 3W

RESISTOR 330 J- Iw

RESISTOR 5.6 J- lW

RESISTOR 0.22 J- 3W

RESISTOR 330 J- lW

FUSIBLERES 100JA l/4W

FUSIBLE RES 270 J- l/4W

FUSIBLE RES 22 JA l/2W

FUSIBLE RES 10 JA l/4W

FUSIBLE RES 0.47 JA l/2W

FUSIBLE RES 2.2 JA l/4W

FUSIBLE RES 22 JA l/2W

FUSIBLE RES 0.47 JA l/2W

RELAY

SCR S-TPG BIN 3X8, FOR HS493

SCR S-TPG BRZ+FLG 3X8, FOR D4900

TERMINAL

4050336706 TR 2SD1468S-R

TUNER & PRE AMPLFIER P.W.BOARD ASSY

4050336805 TR 2SD1468S-S

REF. NO.

4050336706

4050336805

4050336706

4050336805

4050336706

A 4050019302

4051413406

4051413505

4050052002

4050051906

A 4050951602

A 4050951701

A 4051386403

4050118609

4050118500

4050156403

4050156205

4050118609

4050118500

4050156403

4050156205

4050783005

4050006104

A 4050019302

A 4050951602

A 4050951701

A 4051386403

4050118609

4050118500

4050156403

4050156205

TR 2SD1468S-R

TR 2SD1468S-S

TR 2SD1468S-R

TR 2SD1468S-S

TR 2SD1468S-R

TR 2SA1 020-Y

TR KTA1266-GR

TR KTA1266-Y

TR 2SA733-P

TR 2SA733-K

TR 2SD2061-E

TR 2SD2061-F

TR KTD2058Y

TR 2SC1740S-S

TR 2SC1740S-R

TR 2SC2785-F

TR 2SC2785-E

TR 2SC1740S-S

TR 2SC1740S-R

TR 2SC2785-F

TR 2SC2785-E

TR BA1L4M

TR DTC144ES

TR 2SA102O-Y

TR 2SA1 020-Y

TR 2SD2061-E

TR 2SD2061-F

TR KTD2058Y

TR 2SC1740S-S

TR 2SC1740S-R

TR 2SC2785-F

TR 2SC2785-E

C2457

C4248

C4249

C4254

C4256

C4257

C4259

C4264

C4265

C4267

C4535

C4635

CN201

CN211

CN421

CN422

CN424

CN425

CN426

CN450

D2102

D2103

D2104

D2153

D2451

D2462

D4280

D4550

D4551

D4552

18-

PART NO. DESCRIPTION

A 6142970805 ASSY,PWB PRE-AMP,TUNER (N.S.P)

4032590508 NP-ELECT 1U M 50V

4030572407 POLYESTER 0.1 U J 50V

4030676204 MT-COMPO 0.15U J 50V

4030572407 POLYESTER 0.1 U J 50V

4030677805 MT-COMPO 0.47U J 50V

6450050695 TERMINAL, ANT

6142391839 TERMINAL

6450059292 PLUG,5P

6450070082 PLUG,5P

6450090165 SOCKET,16P

6450042935 PLUG,7P

6450042942 PLUG,8P

6450125089 SOCKET,FPC 10P

6450054181 SOCKET,1OP

6450126376 JACK, RCA-2

4071578109 SVC21 1-B

4070124406 DIODE 1SS133

4070996102 ZENER DIODE MTZJ1OB

4070124406 DIODE 1SS133

PARTS LIST

REF. NO.

IC231

IC245

IC420

IC421

IC422

IC453

IC458

IC461

IC462

L2102

U103

L2105

L2151

L2451

L4240

L4241

L4242

LG401

Q2101

Q2102

Q2104

Q2201

Q2451

Q4230

Q4231

Q4501

:4550

Q4601

;4602

R4283

S4501

SH211

T2201

T4001

X2301

X2451

X4240

XF221

XF222

XF231

XF233

PART NO. DESCRIPTION

4093792705 ICLA1832ML

4093784205 ICLC72131MD

4093713205 ICLA2786

4093894706 ICLV1016

4090397804 ICNJM4558M

4094014608 ICBA3842F

4093462301 ICBU2090F

4093538709 ICBU4052BCF

4090397804 ICNJM4558M

6450049200 FILTER,BP 108MHZ

6450202216 FILTER,BP 108MHZ

6142400906 TRANS,RF

6450202247 TRANS,RF,l 00MHZ

6450015441 INDUCTOR,2.2U K

6450230127 TUNER

6450014581 INDUCTOR,1OOU K

6450015519 INDUCTOR,47U K

6450238987 FIXER

4050358609 TR 2SK544-F

4050268403 TR 2SK212-E-SPA

4050268700 TR 2SK21 2-F-SPA

4050160905 TR 2SC2839-E-SPA

4050000904 TR DTA114YS

4050782404 TR BN1A4P

4050207402 TR 2SC945A-P

4050207204 TR 2SC945A-K

4050122002 TR 2SC1815-GR

A 4050235306 TR 2SD400-F-MP

4050336805 TR 2SD1468S-S

4050336706 TR2SD1468S-R

4050207402 TR 2SC945A-P

4050207204 TR 2SC945A-K

4050122002 TR 2SC1815-GR

4050336805 TR2SD1468S-S

4050336706 TR2SD1468S-R

4050782107 TR BN1L4M

4050002205 TR DTA144ES

A 4020714701 FUSIBLE RES 3.3 JA l/4W

6450069673 SWITCH,PUSH 1P-lT

6141165349 SHIELD PLATE, FM_OSC

6142400869 TRANS,IF

6450202230 TRANS,IF 10.7 MHZ

6142391839 TERMINAL

6450100024 OSC,CERAMIC 456 KHZ

6142460870 RESONATOR

6450234965 OSC,CRYSTAL 7.2 MHZ

6450171611 OSC,CERAMIC 8MHZ

6450178931 CERAMIC FILTER 10.70MHZ

6450178931 CERAMIC FILTER 10.7OMHZ

6450230134 CERAMIC FILTER 450 KHZ

6450188824 DISCR,CERAMIC,l O.7OMHZ

6450188718 DISCR,CERAMIC,l O.7OMHZ

CD P.W.BOARD ASSY

REF. NO.

PART NO.

DESCRIPTION

A 6142921890 ASSY,PWB,CD (N.S.P)

CN101 6450060915 PLUG,4P,TP1-4

CN1ll 6450101472 SOCKET,FPC 13P,CD_PlCKUP

CN113 6450058127 PLUG,6P,BASEMECHA

CN114

6450122736 SOCKET, DIP 8P

CN115 6140354935 SOCKET, DIP 4P

CN124 6142940754 ASSY,WIRE,CD-CDMECHA

CN125 6142940761 ASSY,WIRE,CD-CDMECHA

CN131 6450125201 SOCKET,FPC 16P,FRONT

REF. NO.

CN198

D1350

D1351

D1361

D1371

D1601

D1602

D1603

D1604

Iclol

IC102

IC104

IC106

IC131

IC132

L1401

LUG11

PR161

PR162

PR191

Q1101

Q1102

Q1201

Q1202

:1211

Q1321

Q1351

;1361

Q1371

R1350

R1371

VR101

X1401

POWER

REF.NO.

FPCO1

FPC02

L4980

WR498

WR499

-19-

PART NO.

DESCRIPTION

6450054242 SOCKET,l 6P, FRONT

6450060922 PLUG,5P,AMP

4070079904 DIODE GMAO1

4070124406 DIODE 1SS133

4070125809 DIODE 1SS176

4071536109 DIODE 1SS119-041

4070995402 ZENER DIODE MTZJ6.2B

4070995105 ZENER DIODE MTZJ4.7B,LOADING-M

4070994504 ZENER DIODE MTZJ3.9A,0PN/CLS-M

A 4070049709 DIODE DSK1 OC

A 4070049709 DIODE DSK1OC

4093273402 ICCXA1782BQ

A 4093178509 IC BA6398FP

4093867502 IC CXD2508AQ

4090397408 IC NJM4558D

4090184305 IC LA6458D

A 4094081402 ICLB1648L

A 4094081303 IC LB1641L

6450014550 INDUCTOR,1OU K

6450238987 FIXER, CD-SIDE

A 6450142468 PROTECTOR,0.63A 125V

A 6450142499 PROTECTOR,0.4A 125V

4050086809 TR 2SB808-F-SPA

4050087202 TR 2SB81 O-E

4050087301 TR 2SB81 O-F

4050087103 TR 2SB808-G-SPA

4050086809 TR 2SB808-F-SPA

4050087202 TR 2SB81 O-E

4050087301 TR 2S681 O-F

4050087103 TR 2SB808-G-SPA

4050095207 TR 2SB927-S

4050019302 TR 2SA1 020-Y

4050086809 TR 2SB808-F-SPA

4050087202 TR 2SB81 O-E

4050087301 TR 2SB81 O-F

4050087103 TR 2SB808-G-SPA

4050003806 TR DTC114YS

4051289001 TR RN1207

4050370809 TR 2SC4048

4050207402 TR 2SC945A-P

4050207204 TR 2SC945A-K

4050122002 TR 2SC1815-GR

4050000508 TR DTA114ES

4050782305 TR BN1 A4M

4050011108 TR RN2202

4050000508 TR DTA114ES

4050782305 TR BN1A4M

4050011108 TR RN2202

4050000508 TR DTA114ES

4050782305 TR BN1 A4M

4050011108 TR RN2202

A 4020721600 RESISTOR 10 J- lW

6450107597 VR,SEMI,47K N

6142546932 RESONATOR, CERAMIC

6142592137 RESONATOR, CERAMIC

TRANSFORMER, PRIMARY

P.W.BOARD ASSY

PART NO.

DESCRIPTION

A 6142958339 ASSY,PWB PT1 (N.S.P)

6450064760 HOLDER,FUSE

A 6142290422 INDUCTOR, FERITE

6140178203 TERMINAL BOARD

Page is loading ...

Sanyo DC-F430AV User manual

Brand: Sanyo

Model: DC-F430AV

Category: Cassette players

Type: User manual

This manual is also suitable for

Download PDF

report

Sanyo DC-F430AV User manual

This manual is also suitable for

Sanyo DC-F430AV User manual

Related papers

Other documents