PASSPORT
®
300 PRO
(This is the model name for warranty claims)
Fender Musical Instruments Corporation, 8860 East Chaparral Road Suite 100 Scottsdale, AZ 85250
Issued: November, 2009
P/N 069-4403-000
SERVICE MANUAL
ATTENTION:
WARRANTY SERVICE PROCEDURES
Warranty service for the Passport 300 PRO is limited to the replacement of the defective
PCB Assemblies and all other parts not marked as “REF” in the Parts List. Non-Warranty
repairs can of course be to the component level at the Service Center’s discretion. For
non-warranty component level repairs all parts listed as “REF” in the Parts List must be
sourced from suppliers other than FMIC.
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
2
November, 2009
IMPORTANT NOTICE
• Copyright © 2009 FMIC. All rights reserved. All
information contained herein is CONFIDENTIAL
and PROPRIETARY and is the property of
Fender® Musical Instruments Corporation. It is
not to be sold or assigned to another party and is
disclosed solely for use by Fender Authorized
Service Centers for purposes of product service
and maintenance. All information is not to be
disclosed to others without the expressed
permission of Fender® Musical Instruments
Corporation. All specifications are subject to
change without notice. This information and any
copies produced electronically or otherwise must
be surrendered upon demand of Fender® Musical
Instruments Corporation.
• Parts marked with two asterisks (
**) indicate the
required use of that specific part. This is
necessary for RELIABILITY and SAFETY
requirements.
DO NOT USE A SUBSTITUTE!
PARTS LIST CODES
The description codes used in the itemized Parts Lists are defined below:
CAPACITOR
CODES
CAP AE = Aluminum Electrolytic
CAP CA = Ceramic Axial
CAP CD = Ceramic Disk
CAP CR = Ceramic Radial
CAP MPF = Metalized Polyester Film
CAP MY = Mylar
CAP PFF = Polyester Film/Foil
RESISTOR
CODES
RES CC = Carbon Comp
RES CF = Carbon Film
RES FP = Flame Proof
RES MF = Metal Film
RES MOX = Metal Oxide
RES WW = Wire Wound
HARDWARE
CODES
BLX = Black Oxide
CR = Chrome Plated
HWH = Hex Washer Head
M = Machine Screw
NI = Nickel Plated
OHP = Oval Head Phillips
PB = Particle Board
PHP = Pan Head Phillips
PHPS = Pan Head Phillips Sems
SMA = Sheet Metal "A" Point
SMB = Sheet Metal "B" Point
SS = Stainless Steel
TF = Thread Forming
ZI = Zinc Plated
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
3
SPECIFICATIONS
Model Name:
PASSPORT 300 PRO
Release Number: PR845
Part Numbers: (120V, 60Hz) US: 069-4403-000
(240V, 50Hz) AUS: 069-4403-030
(230V, 50Hz) UK: 069-4403-040
(230V, 50Hz) EUR: 069-4403-060
(120V, 60Hz) DS: 069-4403-900
(110V, 60Hz) TW DS:
069-4403-910
(240V, 50Hz) AUS DS:
069-4403-930
(230V, 50Hz) UK DS:
069-4403-940
(220V, 50Hz) ARG DS: 069-4403-950
(230V, 50Hz) EUR DS: 069-4403-960
(100V, 50Hz) JPN DS:
069-4403-970
(220V, 60Hz) ROK DS:
069-4403-990
Power Requirement:
450W
Fuse type: T6.3A H, 250V
Passport System: Width: 29 in. (73.66 cm)
Height: 23 in. (58.42 cm)
Depth: 11 in. (27.94 cm)
Weight: 44 lbs (19.96 kgs)
Product specifications are subject to change without notice
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
4
SERVICE NOTES
The followings are the procedures to disassemble
the 300 PRO Mixer Tower.
1. Shelf Removal – Open the Rear Panel Door.
Then, using a screwdriver or flat tool, insert the
screwdriver head into the slot at the right hinge
and twist the screwdriver (as shown below in
photo 1) and pull the door out; this should
release the shelf from the hinge. Do not push
too hard since the hinges are made of plastic.
Repeat this for the other shelf and both shelves
can be removed.
2. Rear Door Disassembly – Open the Rear
Panel Door. Pull the door up, releasing it from
its hinges on either side of the bottom of the
door. Now, notice the two inner edges noted in
photo 2. Tilt the Rear Door upward until the
bottom right edge of the door is able to clear
edge 1, and pull the bottom right side of the
Rear Door up past this edge until the right leg of
the door meets the edge (2) above it (see photo
3). Tilt the door back down, and push the door
into toward the unit such that the right edge of
the Rear Door clears this edge. The Rear Door
can now be removed. (Note: This is the first
step for disassembling other parts)
3. SMPS & AMP Module Disassembly –
Unscrew the six M3 screws on the rear panel,
then pull the SMPS/AMP module out of the
Passport enclosure. Unplug all connectors
before completely removing the SMPS/AMP
module. (Note: This is the second step for
disassembling other parts)
4. SMPS PCB & AMP PCB Disassembly –
Unscrew the two M9 nuts locking the speaker
output jacks on the rear panel. Unscrew the
eight M3 flat screws on the rear panel. Unplug
all connectors and remove the rear Panel.
Unscrew the six screws from the Cover A box
and remove Cover A. Unscrew the one M3 flat
screw from the Cover B box that is attached to
the AMP PCB bracket. Unscrew the eight M3
screws holding the SMPS PCB and remove the
Cover B box. Unplug the connectors between
the SMPS PCB and AMP PCB. Unscrew the
four M3 screws on the Bracket-AMP IC and
remove the bracket. Unscrew the two M3
screws on the bottom side of the SMPS PCB
that are holding the AMP PCB in place.
5. Front Panel Disassembly – Removing the
front panel is a two step process. Unscrew the
three M3 screws of the Partition Main board
that is being accessed from the back. Unplug
the connector, and then remove the Partition
Main board. Unscrew the eight M3 screws that
are holding the front panel in place. The front
panel can now be removed.
6. INPUT PCB Disassembly – Remove the
stereo out knob from the front. Remove the
eleven M9 nuts and washers from the input
jacks. Unscrew the eight XLR jack mounting
screws. Unscrew the three M3 screws from the
Input PCB. The Input PCB can now be
removed. (Note: This step must be performed
after step 4)
7. Mixer PCB Disassembly – Remove all 26
knobs from the front of the unit. Unscrew the
eleven M3 screws from the mixer PCB. The
Mixer PCB can now be removed. (Note: This
step must be performed after the step 5)
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
5
Photo 1: Screwdriver inserted into shelf hinge.
Photo 2: Edges Rear Door must pass Photo 3: Push Rear Door in toward unit to remove
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
6
PCB EXCHANGE POLICY
Parts marked with a single asterisk (
*) in the Parts
List are not field replaceable. If a failure due to one
of these components is detected, please contact
the FMIC Customer Service Department to order
the complete PCB Assembly.
CIRCUIT DESCRIPTION
This section provides concise information about new
or unusual circuitry designs incorporated into this
amplifier model. The purpose is to aid the service
technician by providing insight into the design areas
most likely to become obstacles in troubleshooting.
Information is focused for its effective use while
maintaining the security of Fender® proprietary
information wherever possible.
The 300 PRO consists of the following modules.
1. The SMPS PCB Module
2. The Input PCB Module
3. The Mixer PCB Module
4. The Class-D Amplifier PCB Module
The SMPS PCB Module
The SMPS PCB Module uses SW501 to select
input AC mains voltages ranging from 100V ~ 120V
(50/60Hz) at the 115V AC mains setting, and 220V
~ 240V (50/60Hz) at the 230VAC mains setting. It
then provides the following output voltages to power
the 300 Pro for various functionalities.
1. +40/-40VDC for the class-D amplifier PCB
assembly
2. +5/-5VDC for the class-D amplifier PCB
assembly
3. +12VDC V_driver for the Class-D amplifier PCB
assembly
4. +15/-15VDC for the input PCB assembly
5. +24Vdc for The fan
6. +8VDC for the wireless microphone
7. +5VDC for the MCU and LED etc.
8. +48VDC for the microphone
U502 (ICE2B365) is the PWM controller integration
switch MOSFET to drive Transformer T504, which
supplies +15/-15VDC, 8VDC, 12VDC, 24VDC,
+5VDC, +48VDC and switches on the PWM
controller U501 (KA3844B). U501 then alternately
switches Q501 and Q502 on and off according to
the load condition to drive transformer T501, which
supplies +40/-40VDC and +5/-5VDC voltage to the
Class-D amplifier PCB assembly.
The Input PCB Module
The input PCB provides a series of input and output
jacks as described below.
1. Channel 1-4 with XLR and ¼” TRS phone jacks
2. Channel 5-6 with 1/8“stereo and ¼” TRS phone
jacks.
3. ¼” TRS Pre-Amp Out / Power Amp In phone
jacks
4. 1/8” stereo output with volume control.
5. ¼” Subwoofer output.
Channel 1-4 also contain “PAD” switches which
provide 20dB of attenuation when being engaged.
Channel 5-6 can be used for both, mono as well as
stereo input sources. The input is a mono input
when only the L/Mono jack is being used. The XLR
jacks on channel 1-4 can provide +48VDC phantom
power when the phantom power switch is being
engaged. The signal from the XLR and ¼” phone
jacks are either amplified (Mic input by +40dB) or
buffered (Line input by 0dB) and then fed to the
Mixer PCB.
All signals that are coming from the mixer buss is
being fed through a limiter and then fed to the
amplifier.
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
7
The Mixer PCB Module
The Mixer PCB module receives input signal from
channel 1-6. It provides the following control
functions for each channel.
1. LEVEL VOLUME
2. EQ LOW
3. EQ HIGH
4. REVERB VOLUME.
5. INPUT SIGNAL PRESENT / CLIP INDICATOR.
The input signals from each channel along with the
reverb output are summed at U214. The summed
signal is going through a System EQ and a Master
Volume Control to the amplifier module via the Input
PCB. The output level is being shown on the LED
meter bar.
The AMP Module
The amplifier is a two-channel 150W per channel /
4 Ohm half-bridge Class-D audio power amplifier.
Its power supply is +/-40VDC.
The main features about the amplifier are as
follows:
Output Power: 150 W per channel into 4 Ohms at
1% THD+N at 1kHz.
Multiple Protection Features
- Over-current protection (OCP),
- Over-voltage protection (OVP),
- Under-voltage protection (UVP),
- DC-protection (DCP),
- Over-temperature protection (OTP)
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
* Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY section above.
shaded Unique Fender® part. Order directly from the FMIC Parts Department.
shaded + * Access to this part or assembly is controlled. Please contact the FMIC Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part.
shaded + ** Both a unique Fender® part and a Safety Requirement part as defined above.
8
.PARTS LIST:
AMP - PCB ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 0079972000
*PCB ASSY, PWR AMP Complete AMP PCB Assembly
3 REF CC 25V 10U 10% 1206 C767, C768, C769
2 REF CC 25V 22U 10% 1210 C735, C736
4 REF CC 25V 3.3U 10% 1210 C747, C748, C749, C750
12 REF CC 50V 0.1uF 10% 0805 C708, C709, C747A, C748A, C749A, C750A, C775, C7G1, C7G2,
C7HS1, C7HS2, CS1
4 REF CC 50V 220pF 5% 0805 C702, C703, C706, C707
1 REF CC 50V 0.22U 10% 0805 C777
4 REF CC 50V 2.2U 10% 1206 X7R C730, C731, C732, C770
2 REF CC 50V 47pF 5% 0805 1.2x C728, C729
2 REF CC 50V 0.047U 10% 0805 C765, C766
2 REF CC 100V 4700P 10% 0805 C759A, C760A
2 REF CC 500V 150P 10% RLT 7X9 C755, C756
8 REF CC 250V 1000P 5% 0805 C737, C738, C740, C742, C751, C752, C753, C754
6 REF CC 250V 0.1U 10% X7R C716, C717, C718, C719, C739, C741
2 REF CM 400VDC 0.47U 5% RB C759, C760
2 REF CM 400V 0.1U 5% RL 18X14 C761, C762
2 REF CT 16V 10uF 20% SM C733, C734
1 REF CE 16V 10uF 20% RL 4x7 C778
1 REF CE 16V 100U 20% RLR 5x11 C774
2 REF CE 16V 22UF 20% RL 4X7 C743, C744
4 REF CE 16V 22U 20% RLR 4X7 C700, C701, C704, C705
4 REF CE 50V 2200UF 20% RL C720, C721, C722, C723
1 REF PCB AMP D/S 94V0 VER03 AMP
2 REF INDUCTOR 22UH +/-20% L700, L701
2 REF CHOKE-COMMON MODE 10A CL700, CL701
1 REF WAFER 4P P3.96 STRAIGHT JB702
1 REF CONNECTOR SOCKET 7P JB703
2 0079947000 JACK, 1/4 INCH SPKR CH700, CH701
1 REF IC DUAL OP AMP NE5532D U700
2 REF IC GATE DRIVER IRS20957S U703, U704
2 REF IC ASIC TLC081 SO-8 U705, U706
2 REF BRACKET-GROUNDING PCB M702, M703
2 REF BRACKET-MAIN M700, M701
2 REF RMF 1W 2K 5% ATS METAL O R794, R795
2 REF RMF 1W 47K 1% ATS R783, R785
3 REF RMG 1/10W 0R 1% 0805 R718, R724A, R725A
1 REF RMG 1/10W 0R 5% 0805 R788
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
* Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY section above.
shaded Unique Fender® part. Order directly from the FMIC Parts Department.
shaded + * Access to this part or assembly is controlled. Please contact the FMIC Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part.
shaded + ** Both a unique Fender® part and a Safety Requirement part as defined above.
9
.PARTS LIST:
AMP - PCB ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
2 REF RMG 1/10W 10R 1% 0805 R769, R770
6 REF RMG 1/10W 100R 1% 0805 R710, R712A, R713A, R745, R746, R766
9 REF RMG 1/10W 1K 1% 0805 R719C, R723, R723B, R730, R732, R733, R734, R736, R737
7 REF RMG 1/10W 10K 1% 0805 R706A, R707A, R755, R757, R759, R764, R765
6 REF RMG 1/10W 100K 1% 0805 R700A, R701A, R711, R712, R719B, R763
3 REF RMG 1/10W 1M 1% 0805 R700C, R700D, R721B
2 REF RMG 1/10W 15K 1% 0805 R767, R768
1 REF RMG 1/10W 18K 1% 0805 R721
1 REF RMG 1/10W 2K 1% 0805 R719A
1 REF RGM 1/10W 220R 1% 0805 R735
1 REF RMG 1/10W 2.2K 1% 0805 R718A
2 REF RMG 1/10W 2.4K 1% 0805 R743, R744
1 REF RMG 1/10W 270R 1% 0805 R731
1 REF RMG 1/10W 2.7K 1% 0805 R719
6 REF RMG 1/10W 3.3K 1% 0805 R702A, R703A, R708A, R709A, R754A, R758A
1 REF RMG 1/10W 33K 1% 0805 R703
2 REF RMG 1/10W 39K 1% 0805 R781, R782
2 REF RMG 1/10W 470R 1% 0805 R716A, R717A
1 REF RMG 1/10W 4.7K 1% 0805 R721C
6 REF RMG 1/10W 47K 1% 0805 R718B, R789, R790, R791, R792, R798
8 REF RMG 1/10W 4.7R 1% 0805 R700B, R701B, R775, R776, R777, R778, R779, R780
9 REF RMG 1/10W 5.1K 1% 0805 R700, R701, R705, R706, R707, R708, R709, R718C, R726
4 REF RMG 1/10W 6.8K 1% 0805 R717, R729A, R748, R751
5 REF RMG 1/10W 8.2K 1% 0805 R702, R702B, R721A, R749, R752
2 REF RMG 1/8W 6.8K 5% 1206 R750, R753
4 REF RMG 1/4W 22R 1% 1206 R771, R772, R773, R774
4 REF RMG 1W 5.1R 5% 2512 R704A, R704B, R705A, R705B
2 REF RWR 5W 10R 5% AL R722A, R723A
15 REF DIODE LL4148 SM D700, D701, D702, D703, D718, D719, D723, D724, D725, D738, D739,
D740, D741, D742, D743
8 REF DIODE ULTRA 200V ER1D D710, D711, D712, D713, D714, D715, D716, D717
2 REF DIODE SCHOTTKY 40V 1A D708, D709
1 REF DZ 1/2W 22VD RLZTE-1122D Z705
1 REF DZ 1/2W 3.3V SMD ROHM Z701
1 REF DZ 1/2W 47V 0805 Z706
4 REF TR PNP MMBT5401 HFE: 50 Q712, Q715, Q717, Q718
4 REF TR NPN MMBT5551 HFE: 80 Q706, Q707, Q710, Q714
6 REF TR MMBT3904LT1G NPN Q705, Q716, Q719, Q720, Q721, Q722
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
* Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY section above.
shaded Unique Fender® part. Order directly from the FMIC Parts Department.
shaded + * Access to this part or assembly is controlled. Please contact the FMIC Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part.
shaded + ** Both a unique Fender® part and a Safety Requirement part as defined above.
10
.PARTS LIST:
AMP - PCB ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
4 REF MOSFET N-CH 200V 18A Q700, Q701, Q702, Q703
1 REF THERMISTOR NTC 10K 1% 50 RP701
1 REF WIRE-SHIELD 5P P2.5 #26 JA702
.PARTS LIST:
INPUT - PCB ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 0079970000 *PCB ASSY, INPUT Complete INPUT PCB Assembly
2 REF CC 50V 10P 5% 0603 C961, C962
14 REF CC 50V 100P 5% 0603/1608 C818, C819, C828, C836, C837, C849, C858, C859, C868, C878, C879,
C888, C949, C950
3 REF CC 50V 0.01uF 10% 0603 C670, C960, C969
61 REF CC 50V 0.1U 5% 0603 C801, C802, C803, C804, C805, C806, C816, C817, C825, C826, C829,
C830, C838, C839, C845, C846, C856, C857, C865, C866, C869, C870,
C876, C877, C885, C886, C895, C896, C901, C902, C905, C906, C915,
C916, C919, C920, C922, C923, C928, C929, C930, C931, C932, C938,
C939, C940, C941, C942, C943, C944, C945, C946, C947, C948, C951,
C963, C964, C965, C966, C967, C968
32 REF CC 50V 220P 5% 0603 C821, C822, C841, C842, C861, C862, C881, C882, C891, C892, C893,
C894, C897, C898, C899, C900, C903, C904, C907, C908, C909, C910,
C921, C925, C952, C953, C954, C955, C956, C957, C958, C959
4 REF CC 50V 2200P 5% 0603 C813, C833, C853, C873
6 REF CC 50V 0.033U 10% C911, C912, C913, C914, C934, C935
17 REF CC 50V 470P 5% 0603 C814, C815, C823, C824, C834, C835, C843, C844, C854, C855, C863,
C864, C874, C875, C883, C884, C924
2 REF CE 10V 100U 20% RLR 5X11 CE808, CE809
3 REF CE 25V 220U 20% RLR P2.5 CE801, CE802, CE803
2 REF CE 50V 10U 20% RLR 5X11 CE891, CE892
49 REF CE 50V 47U 20% RLR 5X11 CE813, CE816, CE817, CE818, CE819, CE820, CE823, CE826,
CE827, CE828, CE829, CE830, CE833, CE836, CE837, CE838,
CE839, CE840, CE843, CE846, CE847, CE848, CE849, CE850,
CE851, CE852, CE853, CE854, CE855, CE856, CE857, CE858,
CE859, CE860, CE861, CE862, CE865, CE866, CE867, CE868,
CE869, CE870, CE871, CE872, CE873, CE874, CE875, CE876, CE890
2 REF CE 63V 100U 20% RLT 10x1 CE804, CE805
9 REF CE 63V 47U 20% RLR CE811, CE812, CE821, CE822, CE831, CE832, CE841, CE842, CE888
1 REF PCB INP D/S 94V0 VER03 INP
2 REF COIL 22UH 10% AT BL7 L801, L802
3 REF CONNECTOR 10P P2.54 ST JB2, JB3, JB4
1 REF WAFER 5 PIN P2.5 J5
1 REF WAFER 6 PIN P2.5 JB7
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
* Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY section above.
shaded Unique Fender® part. Order directly from the FMIC Parts Department.
shaded + * Access to this part or assembly is controlled. Please contact the FMIC Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part.
shaded + ** Both a unique Fender® part and a Safety Requirement part as defined above.
11
.PARTS LIST:
INPUT - PCB ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 REF 8 PIN RIGHT ANGLE WAFER JB1
11 0074732000 JACK TRS 1/4 INCH J805, J806, J807, J808, J809, J810, J811, J812, J813, J814, J815
3 0079948000 JACK STEREO 1/8 INCH CK801, CK802, CK803
4 0079949000 JACK BALANCED XLR J801, J802, J803, J804
2 REF SCREW B-TITE BIND M3X6 Q801A
1 REF IC TL074CDT-S014 (SMD) U828
1 REF IC CD74HC4052M96 SO-16 U815
1 REF IC LM13700M/NOPB U826
1 REF IC NJM78M05DL1A-#ZZZB U819
8 REF IC MC33078DR2G OP-AMP U801, U802, U803, U804, U806, U807, U808, U809
1 REF IC NJM79M05DL1A-T-#ZZ U820
13 REF IC DUAL OP AMP NE5532D U805, U810, U811, U812, U813, U814, U816, U821, U822, U823, U824,
U825, U827
4 REF LED SC 3X5XL0.5 WH HIGH D802, D803, D804, D808
1 REF LED SLI-343URC-T32 RED D805
1 REF SIL 3144D GREEN LED 3MM D806
1 REF LED SIL-3143D 3MM RED D807
3 REF HOLDER-INPUT JACK PP 3.5 JACK
5 REF LED HOLDER L L=9 D802-1, D803-1, D804-1, D805-1, D808-1
6 REF LED HOLDER 8MM BLACK D651~D656
4 REF RCF 1/4W 1K 5% ATS R959, R960, R991, R992
3 REF RCF 1/4W 10K 5% ATS R1072, R1075, R1082
4 REF RCF 1/4W 1.8K 5% ATS R824, R854, R884, R914
3 REF RCF 1/4W 20K 5% ATS R1073, R1076, R1081
1 REF RCF 1/4W 47R 5% ATS R976
3 REF RCF 1/4W 470R 5% ATS R810, R816, R906
4 REF RCF 1/4W 8.2K 5% ATS R831, R861, R891, R921
1 REF RCF 1/2W 1.5K 5% AT R802
2 REF RMF 1/10W 300R 5% 0603 R808, R809
4 REF RMF 1/4W 120R 1% AT R835, R836, R895, R896
1 REF RMF 1/4W 20K 1% ATS R805
1 REF RMF 1/2W 10R 5% AL R803
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
* Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY section above.
shaded Unique Fender® part. Order directly from the FMIC Parts Department.
shaded + * Access to this part or assembly is controlled. Please contact the FMIC Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part.
shaded + ** Both a unique Fender® part and a Safety Requirement part as defined above.
12
.PARTS LIST:
INPUT - PCB ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 REF RMF 1W 22R 5% AT FP R801
8 REF RMF 1W 6.8K 1% RLT P5.0 R811, R812, R841, R842, R871, R872, R901, R902
19 REF RMG 1/16W 0R 1% 0603 R1000, R1001, R1002, R1003, R1004, R1005, R1018, R1019, R1020,
R1021, R1022, R1023, R1024, R1025, R1044, R1052, R1057, R967,
R968
2 REF RMG 1/16W 100R 1% 0603 R1033, R1048
22 REF RMG 1/16W 1K 1% R1026, R1041, R1071, R813, R814, R819, R820, R843, R844, R849,
R850, R873, R874, R879, R880, R903, R904, R909, R910, R949, R950,
R965
29 REF RMG 1/16W 10K 1% 0603 R1029, R1032, R1045, R1049, R821, R822, R833, R834, R851, R852,
R863, R864, R881, R882, R893, R894, R911, R912, R923, R924, R945,
R946, R964, R973, R974, R993, R994, R997, R998
6 REF RMG 1/16W 100K 1% 0603 R897, R943, R944, R995, R996, R999
1 REF RMG 1/16W 12K 1% 0603
8 REF RMG 1/16W 2K 1% R817, R818, R847, R848, R877, R878, R907, R908
11 REF RMG 1/16W 20K 1% R1027, R1043, R1078, R823, R853, R883, R913, R951, R952, R987,
R988
2 REF RMG 1/16W 220R 1% R981, R982
4 REF RMG 1/16W 2.2K 1% R1074, R1077, R1080, R1083
15 REF RMG 1/16W 22K 1% 0603 R1028, R1035, R1037, R1042, R1051, R1054, R815, R845, R875,
R905, R947, R948, R953, R954, R966
8 REF RMG 1/16W 2.4K 1% 0603 R827, R828, R857, R858, R887, R888, R917, R918
4 REF RMG 1/16W 27K 1% R829, R859, R889, R919
4 REF RMG 1/16W 3.3K 1% 0603
13 REF RMG 1/16W 47R 5% 0603 R10, R1091, R1092, R1093, R1094, R1095, R1096, R1097, R1098,
R11, R12, R13, R975
4 REF RMG 1/16W 470R 1% 0603 R1031, R1047, R846, R876
23 REF RMG 1/16W 4.7K 1%. R1006, R1007, R1008, R1009, R1010, R1011, R1012, R1013, R1014,
R1039, R1056, R933, R934, R935, R939, R940, R941, R942, R961,
R962, R963, R977, R978
4 REF RMG 1/16W 47K 1% 0603
8 REF RMG 1/16W 4.99K 1% 0603 R1030, R1034, R1036, R1038, R1046, R1050, R1053, R1055
8 REF RMG 1/16W 7.5K 1% R825, R826, R855, R856, R885, R886, R915, R916
4 REF RMG 1/16W 82K 5% R955, R956, R989, R990
1 REF VR ROTARY A20KX2 20% V VR801
4 REF DIODE LL4148 SM D823, D824, D826, D827
1 REF DZ 1/2W 47V 0805 D801
2 REF RECTIFIER DIODE FS6A4-B D1, D2
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
* Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY section above.
shaded Unique Fender® part. Order directly from the FMIC Parts Department.
shaded + * Access to this part or assembly is controlled. Please contact the FMIC Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part.
shaded + ** Both a unique Fender® part and a Safety Requirement part as defined above.
13
.PARTS LIST:
INPUT - PCB ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
14 REF DIODE BAV99 SOT23 D810, D811, D812, D813, D814, D815, D816, D817, D818, D819, D820,
D821, D822, D825
4 REF TR NPN 2SC3689 Q802, Q804, Q806, Q808
1 REF TR TIP31CTU Q801
4 0079955000 SWITCH, PAD S801, S802, S803, S804
1 REF SW PUSH 2P2T L=9.6 S805
1 REF HEAT SINK 20X15X10.8MM Q801B
2 REF CN ASSY UL2547 #26 L=210 JA11/JB11, JA13/JB13
1 REF WIRE-GND 1P #14 UL1015 TP3
.PARTS LIST:
MIXER - PCB ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 0079971000 *PCB ASSY, MIXER Complete MIXER PCB Assembly
31 REF CC 50V 100P 5% 0603/1608 C203, C204, C205, C206, C208, C209, C210, C251, C252, C253, C254,
C255, C256, C257, C258, C267, C268, C277, C278, C321, C322, C421,
C422, C423, C424, C425, C426, C427, C428, C429, C430
3 REF CC 50V 1000P 5% 0603 X7R C283, C284, C317
71 REF CC 50V 0.1U 5% 0603 C201, C202, C243, C244, C245, C246, C247, C248, C249, C250, C259,
C260, C261, C262, C263, C264, C265, C266, C269, C270, C275, C276,
C279, C280, C285, C286, C291, C292, C293, C294, C295, C296, C297,
C298, C299, C300, C309, C310, C311, C312, C313, C314, C315, C316,
C320, C323, C324, C331, C332, C333, C334, C335, C336, C351, C352,
C353, C354, C355, C356, C357, C358, C401, C402, C403, C404, C405,
C406, C411, C415, C416, CE291
2 REF CC 50V 12P 5% 0603 C325, C326
2 REF CC 50V 120PF 5% C433, C434
2 REF CC 50V 1200P 5% 0603 C327, C328
2 REF CC 50V 220P 5% 0603 C281, C282
16 REF CC 50V 0.22UF +80/-20% C301, C302, C303, C304, C305, C306, C307, C308, C341, C342, C343,
C344, C345, C346, C347, C348
2 REF CC 50V 0.027U 5% 0603 C435, C436
2 REF CC 50V 0.27U 10% 0805 C431, C432
13 REF CC 50V 33P 5% 0603/1608 C207, C227, C228, C229, C230, C231, C232, C233, C234, C318, C319,
C329, C330
8 REF CC 50V 0.039U 5% 0603 C211, C212, C213, C214, C215, C216, C217, C218
2 REF CC 50V 470P 5% 0603 C289, C290
2 REF CC 50V 0.47U 10% 0805 C413, C414
2 REF CC 50V 51P 10% 0603 NPO C437, C438
16 REF CC 50V 6800P 10% C219, C220, C221, C222, C223, C224, C225, C226, C235, C236, C237,
C238, C239, C240, C241, C242
4 REF CC 50V 8200P 10% 0603 C271, C272, C273, C274
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
* Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY section above.
shaded Unique Fender® part. Order directly from the FMIC Parts Department.
shaded + * Access to this part or assembly is controlled. Please contact the FMIC Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part.
shaded + ** Both a unique Fender® part and a Safety Requirement part as defined above.
14
.PARTS LIST:
MIXER - PCB ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
3 REF CE 6.3V 100UF 20% RLR 6 CE246, CE315, CE331
1 REF CE 16V 10U 20% RLR 4x7 CE248
1 REF CE 16V 100U 20% RLR 5x11 CE245
3 REF CE 25V 100U 20% RLR 5X11 CE201, CE202, CE290
2 REF CE 50V 1U 20% RLR 5x11 E CE241, CE242
8 REF CE 50V 10U 20% RLR 5X11 CE301, CE302, CE303, CE304, CE305, CE306, CE307, CE308
16 REF CE 50V 2.2U 20% RLR 4x7 CE219, CE220, CE221, CE222, CE223, CE224, CE225, CE226, CE227,
CE228, CE229, CE230, CE231, CE232, CE233, CE234
2 REF CE 50V 3.3U 20% RLR CE243, CE244
41 REF CE 50V 47U 20% RLR 5X11 CE203, CE204, CE205, CE206, CE207, CE208, CE209, CE210, CE211,
CE212, CE213, CE214, CE215, CE216, CE217, CE218, CE235, CE236,
CE237, CE238, CE239, CE240, CE247, CE310, CE312, CE313, CE314,
CE321, CE322, CE323, CE324, CE325, CE326, CE327, CE328, CE329,
CE330, CE332, CE333, CE334, CE401
1 REF PCB MIX D/S 94V0 VER03 MIX
3 REF CONNECTOR 10P P2.54 JB2, JB5, JB6
2 REF WAFER JM24182-3P JB13, JB9
1 REF CRYSTAL 32.768KHZ 2X6 X301
2 REF IC NJM2068M-#ZZZB U233, U234
4 REF IC TL074CDT-S014 (SMD) U226, U227, U228, U229
1 REF IC REG NCP1117ST33T3G U217
1 REF IC 16-CH DEMULTIPLEXER U232
1 REF IC MCU S3F9454BZZ-SK94 U405
5 REF IC 8 BIT SHIFT REG U401, U402, U403, U404, U407
21 REF IC DUAL OP AMP NE5532D U201, U202, U203, U204, U205, U206, U207, U208, U209, U210, U211,
U212, U213, U214, U215, U216, U230, U231, U235, U236, U237
1 REF IC REVERB FV-1 28SOIC U218
6 REF DUAL COLOR LED RED/GREEN D651, D652, D653, D654, D655, D656
2 REF LED 2X5X7MM RED D420, D421
8 REF LED 2X5X7MM YELLOW D403, D416, D417, D418, D419, D422, D423, D424
14 REF LED 2X5X7MM GREEN D401, D402, D404, D405, D406, D407, D408, D409, D410, D411, D412,
D413, D414, D415
2 REF LED HOLDER LED3X16 D806/D807
6 REF RCF 1/4W 220R 5% ATS R467, R469, R471, R473, R476, R478
24 REF RMF 1/4W 10K 1% ATS R301, R302, R303, R304, R305, R306, R307, R308, R309, R310, R311,
R312, R341, R343, R344, R345, R346, R347, R348, R349, R350, R351,
R352, R354
6 REF RMF 1/4W 560R 1% ATS R468, R470, R472, R474, R475, R477
4 REF RMG 1/10W 16.9K 1% 0603 R357, R358, R361, R362
4 REF RMG 1/10W 2M 1% 0603 R645, R646, R649, R650
2 REF RMG 1/10W 91K 1% 0603 R365, R366
10 REF RMG 1/16W 0R 5% 0603 R373, R374, R387, R489, R490, R493, R494, R495, R497, R498
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
* Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY section above.
shaded Unique Fender® part. Order directly from the FMIC Parts Department.
shaded + * Access to this part or assembly is controlled. Please contact the FMIC Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part.
shaded + ** Both a unique Fender® part and a Safety Requirement part as defined above.
15
.PARTS LIST:
MIXER - PCB ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 REF RMG 1/16W 10R 1% 0603 R321
8 REF RMG 1/16W 100R 5% 0603 R621, R622, R623, R624, R625, R626, R627, R628
12 REF RMG 1/16W 1K 1% R315, R316, R369, R370, R409, R410, R641, R642, R643, R644, R647,
R648
52 REF RMG 1/16W 10K 1% 0603 R241, R242, R243, R244, R245, R246, R247, R248, R251, R252, R253,
R254, R255, R256, R257, R258, R317, R318, R319, R322, R323, R324,
R325, R326, R328, R329, R330, R355, R356, R367, R368, R376, R377,
R380, R381, R382, R383, R384, R411, R412, R413, R414, R415, R416,
R417, R418, R419, R420, R429, R430, R441, R442
18 REF RMG 1/16W 100K 1% 0603 R391, R392, R393, R394, R395, R396, R397, R398, R401, R402, R403,
R404, R405, R406, R407, R408, R491, R492
24 REF RMG 1/16W 1M 1% 0603 R231, R232, R233, R234, R235, R236, R237, R238, R271, R272, R273,
R274, R275, R276, R277, R278, R291, R292, R293, R294, R295, R296,
R297, R298
8 REF RMG 1/16W 12K 1% 0603 R601, R602, R603, R604, R605, R606, R607, R608
1 REF RMG 1/16W 1.5K 1% 0603 R654
8 REF RMG 1/16W 1.8K 5% 0603 R201, R202, R203, R204, R205, R206, R207, R208
12 REF RMG 1/16W 20K 1% R281, R282, R283, R284, R285, R286, R287, R288, R371, R372, R439,
R440
24 REF RMG 1/16W 220R 1% R451, R452, R453, R454, R455, R456, R457, R458, R459, R460, R461,
R462, R463, R464, R465, R466, R479, R480, R481, R482, R483, R484,
R485, R486
8 REF RMG 1/16W 220K 1% 0603 R421, R422, R423, R424, R425, R426, R427, R428
4 REF RMG 1/16W 2.7K 1% R313, R314, R378, R379
2 REF RMG 1/16W 330K 5% R651, R652
12 REF RMG 1/16W 4.7K 1%. R375, R386, R431, R432, R433, R434, R435, R436, R437, R438, R655,
R656
8 REF RMG 1/16W 5.1K 1% R611, R612, R613, R614, R615, R616, R617, R618
4 REF RMG 1/16W 51K 1% 0603/16 R359, R360, R363, R364
3 REF RMG 1/16W 560R 1% 0603 R445, R446, R653
2 REF RMG 1/16W 68K 1% 0603 R443, R444
10 REF RMG 1/16W 7.5K 1% R447, R448, R631, R632, R633, R634, R635, R636, R637, R638
24 REF RMG 1/16W 9.1K 1% R211, R212, R213, R214, R215, R216, R217, R218, R221, R222, R223,
R224, R225, R226, R227, R228, R261, R262, R263, R264, R265, R266,
R267, R268
5 REF VR ROTARY 50KX2 20% C.C VR211, VR212, VR217, VR218, VR225
4 REF VR ROTARY B20KX1 20% V VR219, VR220, VR221, VR222
4 REF VR ROTARY A20KX1 20% V VR201, VR202, VR203, VR204
2 REF VR ROTARY B20KX2 20% V VR205, VR206
8 REF VR ROTARY B50KX1 20% V VR207, VR208, VR209, VR210, VR213, VR214, VR215, VR216
3 REF VR ROTARY A20KX2 20% V VR223, VR224, VR226
8 REF DIODE LL4148 SM D431, D432, D433, D434, D435, D436, D437, D438
2 REF DZ 1/2W 4.7V UDZS4.7B Z401, Z402
10 REF DIODE BAV99 SOT23 D301, D302, D303, D304, D305, D306, D307, D308, D309, D310
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
* Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY section above.
shaded Unique Fender® part. Order directly from the FMIC Parts Department.
shaded + * Access to this part or assembly is controlled. Please contact the FMIC Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part.
shaded + ** Both a unique Fender® part and a Safety Requirement part as defined above.
16
.PARTS LIST:
MIXER - PCB ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 REF TR PNP HM1426 SOT-89 Q201
1 REF TR 3904 HFE 100-300 SM Q202
1 REF CN ASSY UL2547 #26 L=250 JB14
1 REF WIRE-SHIELD 3P P2.5 #26 JB3
.PARTS LIST:
SMPS - PCB ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 0079973000 *PCB ASSY, SMPS Complete SMPS PCB Assembly
1 0079950000 **CONNECTOR, PWR INLET PANEL-REAR
1 0074484000 **SW CB-SL1412 AM1BCEI AC PANEL-REAR
1 0079954000 **SWITCH, PWR PANEL-REAR
1 0079969000 **FAN, PASSPORT PRO PANEL-REAR
3 REF CC 50V 1000p 5% 0805 C524, C535, C546
2 REF CC 50V 1000pF 10% 1206 1 C547, C574
2 REF CC 50V 0.01U 5% 0805 C528, C545
9 REF CC 50V 0.1U 5% 0805 C516, C517, C518, C519, C521, C522, C529, C543, C589
10 REF CER2 1206 X7R 50V 100N C560, C561, C565, C568, C570, C572, C579, C581, C585, C586
4 REF CC 50V 0.1U 10% RLT 5x5 C523, C595, C596, C597
1 REF CC 50V 2200p 5% 0805 C525
1 REF CC 50V 0.039UF 10% 0805 C563
5 REF CC 100V 0.1U 10% 1206 C512, C513, C536, C537, C578
1 REF CC 1KV 100PF 10% RL C503
1 REF CC 1000V 1000P 10% RLT C541
4 REF CC 1000V 680P 10% RLT C504, C505, C506, C507
2 REF CC 400V 1000P 20% RL Y5 CY5, CY6
2 REF CC 400V 470P +-20% RL CY1, CY2
1 REF CM 275V 0.1UF 20% RL 18X CX3
2 REF CE 6.3V 1000UF 20%RLT 8X C533, C534
1 REF CE 16V 1000U 20% RLT C549
3 REF CE 16V 470UF 20% RLT C584, C590, C591
3 REF CE 25V 1000U 20% RL C548, C569, C593
1 REF CE 25V 22U 20% RLT 5X11 C587
3 REF CE 25V 47U 20% RLT 5X11 C531, C532, C542
7 REF CE 25V 470U 20% RLT C566, C567, C571, C580, C582, C583, C588
1 REF CE 50V 1U 20% RLT 4X7 C575
2 REF CE 50V 100U 20% RLT C520, C573
1 REF CE 50V 2.2UF 20% RLT 4X5 C530
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
* Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY section above.
shaded Unique Fender® part. Order directly from the FMIC Parts Department.
shaded + * Access to this part or assembly is controlled. Please contact the FMIC Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part.
shaded + ** Both a unique Fender® part and a Safety Requirement part as defined above.
17
.PARTS LIST:
SMPS - PCB ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
6 REF CE 50V 2200UF 20% RL C508, C509, C510, C511, C514, C515
1 REF CE 50V 0.47UF 20% RLT C544
1 REF CE 63V 100U 20% RLT 10x1 C576
1 REF CE 400V 22U 20% RL 105C C540
2 REF CE 200V 1000U 20% RL C501, C502
1 REF CP 275V 0.33U 20% RB CX2
1 REF CP 275V 0.47U 20% RB CX1
1 REF PCB SMPS S/S 94V0 VER03 SMPS
1 REF TT-9972 GATE DRIVER TRAN T502
1 REF CURRENT TRANSFORMER T503
1 REF CHOKE O/P S106-157A MUZO L503
1 REF TRANSFORMER SW +/-40V T501
1 REF TRANSFORMER SW +/-15V T504
1 REF CHOKE-COMMON MODE 4MH L502
1 REF CHOKE COMMON MODE 8MH L501
1 REF FERRITE COIL 20UH 20% L507
2 REF FERRITE COIL 47UH 20% L505, L506
1 REF CONNECTOR SOCKET 7P JA3
1 REF JM24182-2P WAFER JA13
10 REF SCREW MACHINE PAN M3X10 BRKT_IC AMP, HS+IC
3 REF SCREW M3X12 W/S&F
WASHER
HS AMP+IC
4 REF SCREW M3X6 BINDING (BLK) BRKT_PWRM PC, HS AMP+PCB1, HS AMP+TM
8 REF SCREW MACHINE BIND HEAD HS AMP+PCB, HS PWRM+PCB, HS+IC-1
1 REF LABEL-BLANK 50X12 SIL
0 REF RIBBON 60MMX300M BLACK
2 REF MICA SHEET 28X18 AMP IC
2 REF MICA T-400 8302 18X12.7M D503/D505-1
2 REF MICA T-400 T03P 25X20M T Q501/Q502
2 REF IC NJM7805FA-#ZZZB U506, U510
1 REF IC NJM7812FA-#ZZZB U503
1 REF IC NJM7905FA-#ZZZB U511
1 REF IC UC3844 DIP8 U501
1 REF IC PWM CONTROL ICE2B365 U502
1 REF IC REGULATOR ADJUST U509
4 REF TERMINAL PIN 250TAP JA6-L, JA6-N, SW501A, SW501B
2 REF METAL SHEET IC406A Q600, Q601
1 REF SPINDLE M3X6.3 CU NA HS AMP+PCB
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
* Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY section above.
shaded Unique Fender® part. Order directly from the FMIC Parts Department.
shaded + * Access to this part or assembly is controlled. Please contact the FMIC Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part.
shaded + ** Both a unique Fender® part and a Safety Requirement part as defined above.
18
.PARTS LIST:
SMPS - PCB ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
2 REF BRACKET-AMP IC SECC IC AMP
2 REF BUSHING TO-220A D503/D505
1 REF RCF 1/4W 1K 5% AT R528
1 REF RCF 1/4W 27R 5% ATS R534
1 REF RCF 1/4W 270R 5% ATS R533
1 REF RCF 1/4W 2.7K 5% AT R525
2 REF RCF 1/4W 47K 5% AT R524, R535
3 REF RCF 1/4W 51R 5% AT R505, R507, R542
2 REF RCF 1/2W 100K 5% AT R502, R503
1 REF RCF 1/2W 470K 5% AT R501
2 REF RMF 1/4W 1K 1% AT R504, R506
1 REF RMF 1/2W 1M OHM 5% AT R540
2 REF RMF 1/2W 220R 5% ATS R566, R567
1 REF RMF 1/2W 0.33R 5% AT R543
1 REF RMF 2W 100R 5% ATS METAL R508
4 REF RMF 3W 150R 5% RLF R511, R512, R513, R514
1 REF RMF 3W 68K 5% ATS METAL R541
1 REF RMG 1/10W 0R 5% 0805 JP529
1 REF RMG 1/10W 1K 1% 0805 R565
2 REF RMG 1/10W 10K 1% 0805 R561, R562
2 REF RMG 1/10W 1.5K 1% 0805 R547, R548
1 REF RMG 1/10W 200K 1% 0805 R529
1 REF RMG 1/10W 22R 1% 0805 R544
1 REF RMG 1/10W 2.2K 1% 0805 R556
1 REF RMG 1/10W 270K 5% 0805 R532
1 REF RMG 1/10W 3K 1% 0805 R520
1 REF RMG 1/10W 3.6K 1% 0805 R552
1 REF RMG 1/10W 3.9K 1% 0805 R530
2 REF RMG 1/10W 39K 1% 0805 R522, R555
2 REF RMG 1/10W 47K 1% 0805 R523, R527
2 REF RMG 1/10W 5.1K 1% 0805 R546, R554
1 REF RMG 1/10W 56K 1% 0805 R549
1 REF RMG 1/10W 8.2K 1% 0805 R521
1 REF RMG 1/8W 0R 1% 1206 JP528
1 REF RMG 1/8W 100R 1% 1206 R550
1 REF RMG 1/8W 10K 1% 1206 R563
8 REF RMG 1/8W 20K 1% 1206 R515, R516, R536, R537, R538, R539, R545, R553
1 REF RMG 1/8W 22K 5% 1206 R526
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
* Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY section above.
shaded Unique Fender® part. Order directly from the FMIC Parts Department.
shaded + * Access to this part or assembly is controlled. Please contact the FMIC Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part.
shaded + ** Both a unique Fender® part and a Safety Requirement part as defined above.
19
.PARTS LIST:
SMPS - PCB ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 REF RMG 1/8W 4.7K 1% 1206 R519
2 REF RMG 1/8W 4.7R 1% 1206 R517, R518
1 REF RMG 1/8W 680R 1% 1206 R551
8 REF RMG 1/4W 0R 5%(<50mOHM) JP520, JP521, JP522, JP523, JP524, JP525, JP526, JP527
2 REF VARISTOR 220V 10% 14MM VDR501, VDR502
1 REF SVR B1K H3 VZ067TL7B VR501
2 REF DIODE ULTRA 400V 16A D503, D505
6 REF DIODE LL4148 SM D509, D510, D511, D512, D543, D544
1 REF DIODE SB580 DO-201AD RL D525
2 REF DIODE ULTRA 600V 2A D501, D502
2 REF DIODE 75V 250MA 4NS D507, D508
1 REF DIODE RECT 800V 1A UF1K D523
1 REF PHOTOCOUPLER LTV817A U507
2 REF DZ 1/2W 15V 5% SOD-123C Z506, Z507
4 REF DZ 1/2W 18V TEMIC AT Z501, Z502, Z503, Z504
1 REF DZ 1/2W 18V 5% SOD-123C Z505
1 REF DZ 1/2W 51V 5% DO-35 AT Z509
1 REF DZ 1/2W 6.2VB SMD LL-34 Z508
1 REF SCR MCR100-6600V 0.8A SCR01
7 REF DIODE 1N4148TA NS D513, D514, D515, D517, D518, D534, D545
3 REF RECTIFIER UF4003-T GI AT D519, D521, D522
1 REF RECTIFIER UF4006-T GI AT D527
8 REF RECTIFIER ES1D D506, D516, D520, D524, D526, D533, D541, D542
1 REF SUPPRESSOR TVS 10V 600W D530
1 REF BRIDGE RECTIFIER BG501
1 REF TR KTC3875Y Q505
2 REF TR 3906 PNP SM Q506, Q509
1 REF TR BD139-10 HFE63-160 Q507
1 REF TR MMBT3906LT1G SMD Q504
1 REF TR MMBT3904LT1G NPN Q503
1 REF REG NJM7815FA-#ZZZB U504
1 REF REG NJM7915FA-#ZZZB U505
2 REF MOSFET IRFP460APBF 20A Q501, Q502
2 REF NTC THERMISTER SCK057 NTC1, NTC2
1 REF THERMISTOR NTC 10K 1% NTC3
1 REF HEATSINK POWER PCB POWER PCB
1 REF HEATSINK PWRM& POWER PCB1
1 REF WIRE-CONN 8P P2.54 #22 JA1
PASSPORT
®
300 PRO
(This is the model name for warranty claims)
* Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY section above.
shaded Unique Fender® part. Order directly from the FMIC Parts Department.
shaded + * Access to this part or assembly is controlled. Please contact the FMIC Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part.
shaded + ** Both a unique Fender® part and a Safety Requirement part as defined above.
20
.PARTS LIST:
SMPS - PCB ASSEMBLY
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 REF WIRE-CONN 4P P3.96 #16 JA2
1 REF WIRE GDN 2P #14 UL1015 GND
1 REF THERMISTOR 100C TH01
.PARTS LIST:
MAIN UNIT CASING MATERIALS
QTY PART # DESCRIPTION REFERENCE DESIGNATION
1 0079974000 *MODULE, PWR AMP SMPS, PCB ASSY AMP & PCB ASSY SMPS Module
1 REF PANEL REAR AL BLACK CABINET R/L
1 0079976000 *PANEL, FRONT W/LEXAN Front Panel, Lexan, Membrane Diffuse Sheet
0 0079975000 *MODULE, FRONT PANEL
STUFFED
Includes all Elec and Mech parts on front panel (stuffed PCB’s, knobs,
front panel, etc.)
1 REF 2617-12 REV:A WIRELESS P PARTIT
1 REF CHOKE-EARTH 200UH 1% 10A GND
1 REF T'NAL 2225A-20D 2x10 PIN PARTIT
26 0079944000 KNOB, SMALL FRONT PANEL
1 0079945000 KNOB, LARGE FRONT PANEL
2 0079958000 LATCH, SPKR LATCH ASSY LATCH ASSY
2 REF SPRING-COIL 0.6X(3+5)X14 LATCH-LINK
2 REF WASHER SPRING M3X0.9X5.5 RPN_POWER JA
2 REF M3 NUT NI RPN_POWER JA
2 REF NUT HEX M4 GND WIRE
2 REF NUT HEX M4 GND WIRE
7 REF SCREW M3X10 W/S&F PWRM BOX_PWR
2 REF SCREW MACHINE PAN M3X12 WIRENESS
3 REF SCREW PH M3X 21 MM BZ CR PARTITION
1 REF SCREW MACHINE FLAT-CS PWRM BOX_AMP
6 REF SCREW MACHINE FLAT-CS HANDLE_BRKT
1 REF SCREW M3X6 BINDING (BLK) PWRM BOX_AMP
1 REF SCREW MACHINE BIND HEAD PWRM BOX_PWR
6 REF SCREW MACHINE BIND HEAD RPN_BRKT
4 REF M3X8MM (NICKEL) INPUT PCB
13 REF M3X8MM (NICKEL) VOL PCB
2 REF SCREW S-TITE FLAT-CS RPN_POWER SE
2 REF SCREW S-TITE PLAT-CS RPN_POWER JA
8 REF SCREW D3X6 S-TITE BH, BK FPN_BRKT
8 REF SCREW 3X8 TAPPING MIC JACK
2 REF SCREW B-TITE PAN M3X8 LOCK_DOOR RE
14 REF SCREW B-TITE PAN M3X10 CABINET R/L_
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Monacor 16.1890 Datasheet
-
Fender PASSPORT PD-150 PLUS User manual
-
-
TEAC A-L700P Block Diagram
-
-
Crest Audio LQ10P LOUDSPEAKER - S User manual
-
-
-
-